Hiya
So over the years I have tried a number of different linuxes, and I am always trying to install some software not available through the systems package manager. However after typing
./compile
I try to type
make
and it never works on any system ever. I am confused as it is never mentioned as an issue, and I figure with a simple install of (at least one of the many) linux systems I have tried, one would be able to compile these programs.
currently I am using mint, this is the error I get when trying to install fox-toolkit
matt@Daisy-Lin ~/Downloads/fox-1.7.21 $ make
Making all in utils
make[1]: Entering directory `/home/matt/Downloads/fox-1.7.21/utils'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/matt/Downloads/fox-1.7.21/utils'
Making all in include
make[1]: Entering directory `/home/matt/Downloads/fox-1.7.21/include'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/matt/Downloads/fox-1.7.21/include'
Making all in lib
make[1]: Entering directory `/home/matt/Downloads/fox-1.7.21/lib'
/bin/bash ../libtool --tag=CXX --mode=compile g++ -DPACKAGE_NAME=\"fox\" -DPACKAGE_TARNAME=\"fox\" -DPACKAGE_VERSION=\"1.7.21\" -DPACKAGE_STRING=\"fox\ 1.7.21\" -DPACKAGE_BUGREPORT=\"jeroen@fox-toolkit.com\" -DPACKAGE=\"fox\" -DVERSION=\"1.7.21\" -D_GNU_SOURCE=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DX_DISPLAY_MISSING=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_LIBRT=1 -DHAVE_LIBPTHREAD=1 -DHAVE_LIBDL=1 -DHAVE_VSSCANF=1 -DHAVE_VSNPRINTF=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -I. -I../include -I../include -Wall -Wextra -Wformat -Woverloaded-virtual -Wshadow -DNO_XIM -MT FX88591Codec.lo -MD -MP -MF .deps/FX88591Codec.Tpo -c -o FX88591Codec.lo FX88591Codec.cpp
g++ -DPACKAGE_NAME=\"fox\" -DPACKAGE_TARNAME=\"fox\" -DPACKAGE_VERSION=\"1.7.21\" "-DPACKAGE_STRING=\"fox 1.7.21\"" -DPACKAGE_BUGREPORT=\"jeroen@fox-toolkit.com\" -DPACKAGE=\"fox\" -DVERSION=\"1.7.21\" -D_GNU_SOURCE=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DX_DISPLAY_MISSING=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_LIBRT=1 -DHAVE_LIBPTHREAD=1 -DHAVE_LIBDL=1 -DHAVE_VSSCANF=1 -DHAVE_VSNPRINTF=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -I. -I../include -I../include -Wall -Wextra -Wformat -Woverloaded-virtual -Wshadow -DNO_XIM -MT FX88591Codec.lo -MD -MP -MF .deps/FX88591Codec.Tpo -c FX88591Codec.cpp -fPIC -DPIC -o .libs/FX88591Codec.o
In file included from FX88591Codec.cpp:1:
../include/xincs.h:188:19: error: X11/X.h: No such file or directory
../include/xincs.h:192:22: error: X11/Xlib.h: No such file or directory
../include/xincs.h:196:22: error: X11/Xcms.h: No such file or directory
../include/xincs.h:197:23: error: X11/Xutil.h: No such file or directory
../include/xincs.h:198:27: error: X11/Xresource.h: No such file or directory
../include/xincs.h:199:23: error: X11/Xatom.h: No such file or directory
../include/xincs.h:200:28: error: X11/cursorfont.h: No such file or directory
make[1]: *** [FX88591Codec.lo] Error 1
make[1]: Leaving directory `/home/matt/Downloads/fox-1.7.21/lib'
make: *** [all-recursive] Error 1
the makefile which was created upon running ./configure is as follows
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
pkgdatadir = $(datadir)/fox
pkglibdir = $(libdir)/fox
pkgincludedir = $(includedir)/fox
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/fox-config.in \
$(srcdir)/fox.pc.in $(srcdir)/fox.spec.in \
$(top_srcdir)/configure AUTHORS INSTALL config.guess \
config.sub depcomp install-sh ltmain.sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = fox.spec fox-config fox.pc
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).zip
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run aclocal-1.10
AMTAR = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run autoconf
AUTOHEADER = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run autoheader
AUTOMAKE = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -Wall -Wextra -Wformat -Woverloaded-virtual -Wshadow -DNO_XIM
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"fox\" -DPACKAGE_TARNAME=\"fox\" -DPACKAGE_VERSION=\"1.7.21\" -DPACKAGE_STRING=\"fox\ 1.7.21\" -DPACKAGE_BUGREPORT=\"jeroen@fox-toolkit.com\" -DPACKAGE=\"fox\" -DVERSION=\"1.7.21\" -D_GNU_SOURCE=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DX_DISPLAY_MISSING=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_LIBRT=1 -DHAVE_LIBPTHREAD=1 -DHAVE_LIBDL=1 -DHAVE_VSSCANF=1 -DHAVE_VSNPRINTF=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1
DEPDIR = .deps
DSYMUTIL =
ECHO = echo
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
F77 =
FFLAGS =
FOX_BYTEORDER = 0
FOX_MAJOR_VERSION = 1
FOX_MINOR_VERSION = 7
FOX_PATCH_LEVEL = 21
GL_LIBS = -lopengl32 -lglu32
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = -rdynamic
LIBOBJS =
LIBS = -ldl -lpthread -lrt
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS =
LT_AGE = 0
LT_CURRENT = 0
LT_RELEASE = 1.7
LT_REVISION = 21
MAKEINFO = ${SHELL} /home/matt/Downloads/fox-1.7.21/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NMEDIT =
OBJEXT = o
PACKAGE = fox
PACKAGE_BUGREPORT =
jeroen@fox-toolkit.com
PACKAGE_NAME = fox
PACKAGE_STRING = fox 1.7.21
PACKAGE_TARNAME = fox
PACKAGE_VERSION = 1.7.21
PATH_SEPARATOR = :
RANLIB = ranlib
SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
STRIP = strip
VERSION = 1.7.21
XMKMF =
X_BASE_LIBS = -lcomctl32 -lwsock32 -lwinspool -lmpr -lgdi32 -limm32
X_CFLAGS =
X_EXTRA_LIBS =
X_LIBS =
X_PRE_LIBS =
abs_builddir = /home/matt/Downloads/fox-1.7.21
abs_srcdir = /home/matt/Downloads/fox-1.7.21
abs_top_builddir = /home/matt/Downloads/fox-1.7.21
abs_top_srcdir = /home/matt/Downloads/fox-1.7.21
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 =
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias =
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias =
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/matt/Downloads/fox-1.7.21/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias =
top_builddir = .
top_srcdir = .
# For non-gcc compilers, change the options to "no-dependencies"
AUTOMAKE_OPTIONS = foreign dist-zip
#AUTOMAKE_OPTIONS = foreign dist-zip no-dependencies
SUBDIRS = utils include lib chart doc tests shutterbug adie pathfinder calculator controlpanel windows
EXTRA_DIST = ADDITIONS AUTHORS INSTALL LICENSE LICENSE_ADDENDUM TRACING README fox.lsm index.html aclocal.m4
bin_SCRIPTS = fox-config
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = fox.pc
CLEANFILES = fox.tar.gz
all: all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
fox.spec: $(top_builddir)/config.status $(srcdir)/fox.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
fox-config: $(top_builddir)/config.status $(srcdir)/fox-config.in
cd $(top_builddir) && $(SHELL) ./config.status $@
fox.pc: $(top_builddir)/config.status $(srcdir)/fox.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
else :; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d $(distdir) || mkdir $(distdir)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-pkgconfigDATA
install-dvi: install-dvi-recursive
install-exec-am: install-binSCRIPTS
install-html: install-html-recursive
install-info: install-info-recursive
install-man:
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
distclean distclean-generic distclean-libtool distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-binSCRIPTS \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-binSCRIPTS uninstall-pkgconfigDATA
snapshot: dist-all
cp $(distdir).tar.gz /net/linky/mnt/ftp/pub/fox-snapshot.tar.gz
cp $(distdir).zip /net/linky/mnt/ftp/pub/fox-snapshot.zip
web: distdir
cd $(distdir)/doc && doxygen doxygen.cfg
cp -r $(distdir)/doc/* /net/linky/mnt/html
drop: dist-all
cp $(distdir).tar.gz /net/linky/mnt/ftp/pub
cp $(distdir).zip /net/linky/mnt/ftp/pub
cd /net/linky/mnt/ftp/pub && ln -sf $(distdir).tar.gz fox-latest.tar.gz
cd /net/linky/mnt/ftp/pub && ln -sf $(distdir).zip fox-latest.zip
#diff: distdir
# -diff -P -c -r fox-1.1.8 $(distdir) > fox-patch-1.1.8-$(distdir)
# Suggestion for the above
# cvs rdiff -u -kk -r fox-1.0.8 -r fox-1.0.9 FOX > fox-path-1.0.8-1.0.9
#ref: distdir
# (cd $(distdir)/include && doc++ -W -i -j --dir ../doc --footer ../doc/classFooter.inc --header ../doc/classHeader.inc *.h)
# cp -r $(distdir)/doc/ref/* /home/html/ref
#dist-hook:
# cp fox.spec $(distdir)
# cp -dpR windows $(distdir)/windows
# -find $(distdir)/windows -name CVS -exec rm -rf {} \;
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
please help.