I followed the instructions for setting up ISA PnP modems @ linux.about.com for setting up my Zoom 56k. Everything seems to be working ok but I can't get the modem set at boot time using the rc.local file. The instructions read:
7. To ensure that your modem is configured each time you boot, you'll need to edit your /ect/rc.d/rc.local fie by adding the following lines to its end:
/sbin/setserial /dev/ttySx port a irq n autoconfig
Be sure that you replace x with the correct serial number,a with the address you used, and n with the IRQ you chose for this modem. Be sure also to replace /sbin with the correct paths to your isapnp and setserial command if necessary.
When I add the above lines nothing happens when I try to connect to my isp. But, if I open up a terminal window and type setserial /dev/ttyS2 port 0x03e8 irq 4 autoconfig it works!!! Any suggestions would be greatly appreciated!