| Blu-star |
02-29-2004 10:20 AM |
trouble with burner
My pioneer-106 burns regular cd´s perfectly, but when i try and burn DVD´s i get this error message, i´ve tried two different brands of DVD. Memorex DVD+R and TDK DVD+RW, but i get the same errors on both, the only thing that is different is that the error can come when 3500MB is burned or when 1764MB, it seems so random.
I´ve tried with driveropts=burnfree both on and off, no difference.
Im using cdrecord-proDVD and have put in the key for it also.
Im using 2.4 kernel and my distro is Slackware.
The command for cdrecord-proDVD (which i renamed to dvdrecord) is: dvdrecord dev=0,0,0 -v -eject /home/jaak/file.iso
I assume this is a software error since burning normal cd´s works just fine.
Code:
Track 01: 1764 of 4459 MB written (fifo 100%) [buf 59%] 4.1x.dvdrecord: Input/output error. write_g1: scsi sendcmd: no err or
CDB: 2A 00 00 0D C9 09 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 0D C6 D0 0E 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 902864 (not valid)
cmd finished after 0.176s timeout 100s
write track data: error after 1850230784 bytes
dvdrecord: A write error occured.
dvdrecord: Please properly read the error message above.
Writing time: 344.395s
Average write speed 9.8x.
Min drive buffer fill was 57%
Fixating...
Fixating time: 1.820s
dvdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
CDB: 1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in progress) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.006s timeout 100s
dvdrecord: Cannot eject media.
dvdrecord: fifo had 29207 puts and 29144 gets.
dvdrecord: fifo was 0 times empty and 5438 times full, min fill was 85%.
bash-2.05b# Track 01: 1764 of 4459 MB written (fifo 100%) [buf 59%] 4.1x.dvdrecord: Input/output error. write_g1: scsi sen dcmd: no error
bash: syntax error near unexpected token `('
bash-2.05b# CDB: 2A 00 00 0D C9 09 00 00 1F 00
ense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 902864 (not valid)
cmd finished after 0.176s timeout 100s
write track data: error after 1850230784 bytes
dvdrecord: A write error occured.
dvdrecord: Please properly read the error message above.
Writing time: 344.395s
Average write speed 9.8x.
Min drive buffer fill was 57%
Fixating...
Fixating time: 1.820s
dvdrecord: Input/output error. start/stop unit: scsi sendcmd: no error
Someone please help me out. |
