Syncing a Sony Clie with RedHat 9
Hi
Approximately a week and a half ago I set up my Sony Clie T615c to sync from a USB port to RedHat 9 using J-Pilot 0.99.6. It worked fine. Approximately one week later, I used the GUI Camera Tool to add some pictures to my computer. My Camera plugs into a different USB port than my Clie cradle (which I leave plugged in all the time). A day or so after downloading my pictures out of the camera I tried to hotsync my Clie using J-Pilot. The only difference between this hotsync and my previous one was that I was trying to install some new files onto the Clie as opposed to just syncing my PIM. This is the message I get from J-Pilot: pi_bind Invalid argument Check your serial port and settings Exiting with status SYNC_ERROR_BIND Finished I get the same message all the time now. Whether I am trying to install files or just trying to sync my PIM. When I try pilot-xfer I get the following message: [root@localhost dad]# pilot-xfer -b /home/dad/Downloads/Palm No $PILOTPORT specified and no -p <port> given. Defaulting to '/dev/pilot' ERROR: No such device Unable to bind to port '/dev/pilot' Please use --help for more information [root@localhost dad]# pilot-xfer -p /dev/ttyUSB1 -b /home/dad/Downloads/Palm ERROR: No such device Unable to bind to port '/dev/ttyUSB1' Please use --help for more information I have created the symbolic links to /dev/ttyUSB1 for pilot, palm and visor. I have changed the security as follows: chmod 666 /dev/ttyUSB* I press the hotsync button on the cradle before I issue the commands. I have tried just about everything I have been able to find through a Google search on this problem but without any luck. Any help in solving this problem would be greatly appreciated. Thanks in advance. Regards, Bill Dika |
All times are GMT -5. The time now is 12:31 AM. |