Linux - SoftwareThis forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
We need a little more information (hd size) (memory). Is there an operating system now and if so which one? As far as the soft modem goes "Smart Link" is the only one I have had success with using the free driver that's available. linmodems has drivers for a lot of them but you will have to buy the ones to give you 56k. If you haven't bought one yet I recommend a external serial modem. You won't need any drivers for these except for Windows OSs.
I basically agree with Larry, but here's a bit more: If you MUST have an internal PCI modem, be absolutely sure to get an HCF modem, and NOT an HSF modem. The difference is that the HSF modems are true *softmodems* ie, made for Winblowz and an extreme pain in the butt for Linux. The HCF units atleast have their own controller onboard, so they aren't totally bad.
Currently, I have/use an Intel 536ep 56k PCI modem, and it has loads of current drivers out there for both 2.4 and 2.6 linux kernels; they are free, and not crippled like some of the ones from Connexant & Win/Linmodems.org, and the modem works just fine.
Newer computers like mine do not have serial ports (thing of the past). Pci modems have allot of support at present, but only Lucent Win modem with mars chip set can be installed on Linux 64bit (the operating system of the future). If you have a 32bit processor and want a pci modem, look towards Intel 536EP, 537EP, ESS, PCtel, Rockwell, and the one you listed for free drivers and full speed. Installing them, you should visit http://linmodems.org
To have a modem that may be more versatile, (good for next computer also), go to a USB modem. Because you only hear about the ones people have problems with, it is hard to say which make and model is best.
A quick check of motherboard model does have a serial (com1) out. As mentioned above,an external serial modem is the simplest way to go. There are several models to choose from, but just make sure the modem has its own on board controller.
We need a little more information (hd size) (memory). Is there an operating system now and if so which one? As far as the soft modem goes "Smart Link" is the only one I have had success with using the free driver that's available. linmodems has drivers for a lot of them but you will have to buy the ones to give you 56k. If you haven't bought one yet I recommend a external serial modem. You won't need any drivers for these except for Windows OSs.
I basically agree with Larry, but here's a bit more: If you MUST have an internal PCI modem, be absolutely sure to get an HCF modem, and NOT an HSF modem. The difference is that the HSF modems are true *softmodems* ie, made for Winblowz and an extreme pain in the butt for Linux. The HCF units atleast have their own controller onboard, so they aren't totally bad.
Currently, I have/use an Intel 536ep 56k PCI modem, and it has loads of current drivers out there for both 2.4 and 2.6 linux kernels; they are free, and not crippled like some of the ones from Connexant & Win/Linmodems.org, and the modem works just fine.
Thanks for your help. Linux is certainly a challenge
A quick check of motherboard model does have a serial (com1) out. As mentioned above,an external serial modem is the simplest way to go. There are several models to choose from, but just make sure the modem has its own on board controller.
A quick check of motherboard model does have a serial (com1) out. As mentioned above,an external serial modem is the simplest way to go. There are several models to choose from, but just make sure the modem has its own on board controller.
Newer computers like mine do not have serial ports (thing of the past). Pci modems have allot of support at present, but only Lucent Win modem with mars chip set can be installed on Linux 64bit (the operating system of the future). If you have a 32bit processor and want a pci modem, look towards Intel 536EP, 537EP, ESS, PCtel, Rockwell, and the one you listed for free drivers and full speed. Installing them, you should visit http://linmodems.org
To have a modem that may be more versatile, (good for next computer also), go to a USB modem. Because you only hear about the ones people have problems with, it is hard to say which make and model is best.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.