LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)
-   -   Problem with k3b in Mandrake 10.1 (https://www.linuxquestions.org/questions/linux-software-2/problem-with-k3b-in-mandrake-10-1-a-258486/)

Belegdol 11-23-2004 03:25 PM

Problem with k3b in Mandrake 10.1
 
Nevertheless I liked it - up to today, when id destroyed 2 cds. It has been reporting that it's unable to decode audio tracks, which were ordinary mp3 (something wrong with names maybe). But today, something got terribly wrong:
Code:

System
-----------------------
K3b Version:0.11.16
KDE Version: 3.2.3
QT Version: 3.3.3

cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4120B'
Revision      : '2.01'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0002 (current)
Using generic SCSI-3/mmc  CD-R/CD-RW driver (mmc_cdr).
Driver flags  : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  686 MB       
Total size:      785 MB (77:48.01) = 350101 sectors
Lout start:      785 MB (77:50/01) = 350101 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -11693 (97:26/07)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 5
Manufacturer: FORNET INTERNATIONAL PTE LTD.
Blocks total: 359846 Blocks current: 358496 Blocks remaining: 8395
Speed set to 1411 KB/s
Starting to write CD/DVD at speed  8.0 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
  1 seconds.
  0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 1350
Track 01:    0 of  686 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 05 64 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 A4 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0xA4
Sense flags: Blk 0 (not valid)
resid: 63736
cmd finished after 1.030s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: Try to use 'driveropts=burnfree'.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 63488 bytes
Trouble flushing the cache
Writing  time:    6.363s
Average write speed 736.7x.
Fixating...
/usr/bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 A4 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0xA4
Sense flags: Blk 0 (not valid)
cmd finished after 0.012s timeout 120s
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.625s
/usr/bin/cdrecord: fifo had 65 puts and 2 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=8 -tao -dummy -eject -multi -xa1 -tsize=351466s -

mkisofs
-----------------------
351466
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem that does not conform to ISO-9660.
  0.15% done, estimate finish Wed Nov 24 01:13:35 2004
  0.29% done, estimate finish Tue Nov 23 23:48:53 2004
  0.43% done, estimate finish Tue Nov 23 23:20:05 2004
  0.57% done, estimate finish Tue Nov 23 23:05:14 2004

mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid JULIAN_15 -volset  -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-jsikorski/k3bZy2wkc.tmp -rational-rock -hide-list /tmp/kde-jsikorski/k3b33Wxma.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-jsikorski/k3bHT30Ub.tmp -untranslated-filenames -iso-level 1 -path-list /tmp/kde-jsikorski/k3bi7J5ia.tmp /home/jsikorski/.kde/share/apps/k3b/temp/dummydir0/

Any Ideas/better recording software for linux?
Disabling multisession caused error about busy device.


All times are GMT -5. The time now is 11:24 PM.