Hi,
I've tried running GnomeBaker to burn some files to a CD-R, but it has failed each time.. However, last night, I successfully burned a DVD ISO to a DVD+RW? That's why I don't understand what is wrong.
I started GnomeBaker as root, added the files I wanted to burn (around 470MB in total), and then told it to burn (with the write mode set to DAO). Here's the output:
Quote:
cdrecord: Warning: Running on Linux-2.6.15-25-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD-RW GWA-4082N'
Revision : 'CB03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13638 kB/s 77x CD 9x DVD
FIFO size : 4194304 = 4096 KB
4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 20 03 80 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.016s timeout 200s
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 20 03 80 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.016s timeout 200s
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 0 bytes
Writing time: 44.131s
Average write speed 74.1x.
Fixating...
Fixating time: 0.004s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
|
So, I closed GnomeBaker, returned to terminal, and entered 'sudo gnomebaker driveropts=burnfree'. It didn't output an error, and started up as before. I added the same files, and tried burning as before - however, I didn't tick the 'BurnFree' option (although I'd specified this in the command?). Here's the output:
Quote:
cdrecord: Warning: Running on Linux-2.6.15-25-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD-RW GWA-4082N'
Revision : 'CB03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13755 kB/s 78x CD 9x DVD
FIFO size : 4194304 = 4096 KB
cdrecord: WARNING: Data may not fit on current disk.
cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
cdrecord: Notice: Use -overburn option to write more than the official disk capacity.
cdrecord: Notice: Most CD-writers do overburning only on SAO or RAW mode.
|
Now it is complaining that I'm attempting to overburn? I'm not - 470MB should fit perfectly well ona 700MB disc.
So, I ran GnomeBaker as root again (without the driveropts parameter), but when I went to burn the disc I ticked the 'BurnFree' option. It gave me exactly the same output as the last one (above).
Here's what happens when I try to do this as a normal user, without the BurnFree option:
Quote:
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: Warning: Running on Linux-2.6.15-25-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
cdrecord: Permission denied. Cannot open '/dev/sg0'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
|
*sigh*
Any ideas? I'm on Ubuntu 6.06, and I'd love to get this working.
Thanks,
-jk
