LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices

Reply
 
Search this Thread
Old 09-03-2004, 11:53 PM   #1
GiZiM
LQ Newbie
 
Registered: Aug 2004
Posts: 18

Rep: Reputation: 0
My 6.1 Surround Sound stopped working


For no reason i have ALSA installed and XMMS is using that it just stopped for no reason. Any ideas??
 
Old 09-04-2004, 08:01 AM   #2
320mb
Senior Member
 
Registered: Nov 2002
Location: pikes peak
Distribution: Slackware, LFS
Posts: 2,577

Rep: Reputation: 47
No idea........need more info.--like a post of your

dmesg


did you read the error logs in /var/log???
 
Old 09-04-2004, 10:57 AM   #3
GiZiM
LQ Newbie
 
Registered: Aug 2004
Posts: 18

Original Poster
Rep: Reputation: 0
demsg

[gizim@localhost gizim]$ dmesg
bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192496 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff5880
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c7000 soft=023c6000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1394.478 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 775120k/786368k available (2012k kernel code, 10456k reserved, 651k data, 140k init, 0k highmem)
Calibrating delay loop... 2736.12 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f3ff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 188k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1094294408.837:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
Applying VIA southbridge workaround.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdcMA, hddio
hda: ST330621A, ATA DISK drive
hdb: WDC WD800BB-00CAA1, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/63, UDMA(100)
hda: hda1 hda2
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: hdb1
hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0235c2a0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:0d.2: EHCI Host Controller
ehci_hcd 0000:00:0d.2: irq 5, pci mem 32868000
ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 5, io base 0000c400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 5, io base 0000c800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0d.0: UHCI Host Controller
uhci_hcd 0000:00:0d.0: irq 10, io base 0000e800
uhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using address 2
ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:0d.1: UHCI Host Controller
uhci_hcd 0000:00:0d.1: irq 11, io base 0000ec00
uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Explorer] on usb-0000:00:07.2-2
EXT3 FS on hda1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51
end_request: I/O error, dev hdc, sector 891648
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51
end_request: I/O error, dev hdc, sector 0
Adding 818992k swap on /dev/hda2. Priority:-1 extents:1
NTFS driver 2.1.15 [Flags: R/W MODULE].
NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
NTFS-fs error (device hdb1): ntfs_check_logfile(): The two restart pages in $LogFile do not match.
NTFS-fs warning (device hdb1): load_system_files(): Failed to load $LogFile. Will not be able to remount read-write. Mount in Windows.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
SCSI subsystem initialized
inserting floppy driver for 2.6.8-1.521
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[db006000-db0067ff] Max Packet=[2048]
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at 0x32887000, 00:04:E2:06:33:F0, IRQ 10.
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (6143 buckets, 49144 max) - 320 bytes per conntrack
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at 0x32a12000, 00:04:E2:06:33:F0, IRQ 10.
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
eth0: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24224 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24281 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24356 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24431 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24479 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24538 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24596 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24640 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=24764 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=28242 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=31711 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=35179 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=38798 PROTO=UDP SPT=123 DPT=123 LEN=56
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.5 to 64
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=42220 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=45699 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=49219 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=52742 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=56383 PROTO=UDP SPT=123 DPT=123 LEN=56
IN=eth0 OUT= MAC=00:04:e2:06:33:f0:00:06:25:79:d4:eb:08:00 SRC=66.187.224.4 DST=192.168.1.100 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=59998 PROTO=UDP SPT=123 DPT=123 LEN=56
[gizim@localhost gizim]$
 
Old 09-04-2004, 10:59 AM   #4
GiZiM
LQ Newbie
 
Registered: Aug 2004
Posts: 18

Original Poster
Rep: Reputation: 0
demsg in /var/log

Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192496 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff5880
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c7000 soft=023c6000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1394.478 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 775120k/786368k available (2012k kernel code, 10456k reserved, 651k data, 140k init, 0k highmem)
Calibrating delay loop... 2736.12 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f3ff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 188k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0c.2[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1094294408.837:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
Applying VIA southbridge workaround.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdcMA, hddio
hda: ST330621A, ATA DISK drive
hdb: WDC WD800BB-00CAA1, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/63, UDMA(100)
hda: hda1 hda2
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: hdb1
hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0235c2a0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: PCI interrupt 0000:00:0d.2[C] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:0d.2: EHCI Host Controller
ehci_hcd 0000:00:0d.2: irq 5, pci mem 32868000
ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 5, io base 0000c400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 5, io base 0000c800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0d.0: UHCI Host Controller
uhci_hcd 0000:00:0d.0: irq 10, io base 0000e800
uhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using address 2
ACPI: PCI interrupt 0000:00:0d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:0d.1: UHCI Host Controller
uhci_hcd 0000:00:0d.1: irq 11, io base 0000ec00
uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:07.2-2
EXT3 FS on hda1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51
end_request: I/O error, dev hdc, sector 891648
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51
end_request: I/O error, dev hdc, sector 0
Adding 818992k swap on /dev/hda2. Priority:-1 extents:1
NTFS driver 2.1.15 [Flags: R/W MODULE].
NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
NTFS-fs error (device hdb1): ntfs_check_logfile(): The two restart pages in $LogFile do not match.
NTFS-fs warning (device hdb1): load_system_files(): Failed to load $LogFile. Will not be able to remount read-write. Mount in Windows.
 
Old 09-04-2004, 04:22 PM   #5
GiZiM
LQ Newbie
 
Registered: Aug 2004
Posts: 18

Original Poster
Rep: Reputation: 0
BUMP
 
Old 10-05-2004, 06:00 AM   #6
bglnelissen
Member
 
Registered: Feb 2004
Location: Utrecht Holland
Distribution: Fedora, Debian, Mandrake, OSX, OpenBSD
Posts: 76

Rep: Reputation: 15
i hope you didnot gave up yet! mightbe this will work

alsa mixer has some default settings witch can result in no sound.

$ alsamixer

start changing some settings (opening/ closing volume settings etc)

hope this works. (worked for me (SB LIVE 5.1)

luck

Bas


(options in xmms are correct??)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sound stopped working tbthorpe Linux - Hardware 4 02-21-2005 03:27 PM
5.1 Channel Surround Edio PCI sound card not working p3_141597i Linux - Hardware 9 02-09-2005 12:31 PM
Surround Sound Speakers not fully working Norin311 Linux - Software 2 09-12-2004 08:02 PM
My sound just STOPPED working.... oicdn Linux - Software 7 06-02-2004 04:40 PM
HowTo get surround sound (4.1/5.1) working Wynand1 Linux - Newbie 1 03-05-2004 10:58 AM


All times are GMT -5. The time now is 03:25 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration