LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices

Reply
 
Search this Thread
Old 07-04-2009, 02:29 PM   #1
HazelT
LQ Newbie
 
Registered: Jul 2009
Posts: 2

Rep: Reputation: 0
Mouse and Keyboard stopped working after xserver/kde update


I'm using Slackware current, and yesterday I decided to run an upgrade since I was having some issues with kde that I expected to have solved with the new version.
But instead of that, my mouse and keyboard stoped working. They work normally outside of X, but as soon as I startx, they stop working.

here are some info that might be useful.
KDE 4.2.4
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux 2.6.25.7 #4 SMP Wed Jun 3 01:51:07 CDT 2009 i686
Build Date: 01 July 2009 11:56:52AM

Xorg.0.log shows a message that I don't know if is related or not.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0

HALD and DBUS are up and running
Code:
82        1917  0.0  0.1   5656  2128 ?        Ss   13:39   0:00 /usr/sbin/hald --daemon=yes
root      1918  0.0  0.0   3220   996 ?        S    13:39   0:00 hald-runner
82        1926  0.0  0.0   2340   940 ?        S    13:39   0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
81        1925  0.0  0.0   2408   708 ?        Ss   13:51   0:00 /usr/bin/dbus-daemon --system
Xorg.0.log
Code:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/ouzo:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux ouzo 2.6.25.7 #4 SMP Wed Jun 3 01:51:07 CDT 2009 i686
Build Date: 01 July 2009  11:56:52AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun  4 13:24:13 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xee0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) unknown vendor (0x10de) unknown chipset (0x0427) rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.14  Wed May 27 03:09:07 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  185.18.14  Wed May 27 02:32:54 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.45.00.12
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0:
(--) NVIDIA(0):     Seiko (DFP-0)
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (108, 106); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
Any idea?
 
Old 07-04-2009, 03:33 PM   #2
bathory
Guru
 
Registered: Jun 2004
Location: Piraeus
Distribution: Slackware
Posts: 10,938

Rep: Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330
I guess you have to copy /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi to /etc/hal/fdi/policy/, restart hald and restart X.
 
Old 07-04-2009, 04:20 PM   #3
HazelT
LQ Newbie
 
Registered: Jul 2009
Posts: 2

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by bathory View Post
I guess you have to copy /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi to /etc/hal/fdi/policy/, restart hald and restart X.
Tried without success.
I've added:
Option "AutoAddDevices" "false"
to my xorg.conf as an workaround, this made it to work, but I guess I still have to find a way out of using HAL.

Thanks for the help
 
Old 11-06-2009, 07:23 AM   #4
CollieJim
Member
 
Registered: Mar 2005
Distribution: Gentoo, Kubuntu
Posts: 444

Rep: Reputation: 19
I have just updated my Gentoo system and have the same problem. Pressing the Reset button is the only way out.

I tried the remedy above to no effect.
Xorg.0.log has the following:
Code:
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(EE) module ABI major version (2) doesn't match the server's version (4)
(II) UnloadModule: "mouse"
(II) Unloading /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (module requirement mismatch, 0)
(EE) No input driver matching `mouse'
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(EE) module ABI major version (2) doesn't match the server's version (4)
(II) UnloadModule: "kbd"
(II) Unloading /usr/lib/xorg/modules/input//kbd_drv.so
(EE) Failed to load module "kbd" (module requirement mismatch, 0)
(EE) No input driver matching `kbd'
It looks like the mouse and kbd modules got left behind.
How do I fix it???
 
Old 11-06-2009, 04:12 PM   #5
bathory
Guru
 
Registered: Jun 2004
Location: Piraeus
Distribution: Slackware
Posts: 10,938

Rep: Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330Reputation: 1330
Hi,

Your problem is not the same as the OP:
Quote:
(EE) module ABI major version (2) doesn't match the server's version (4)
I guess you have to rebuild the keyboard and mouse drivers for your new xorg-server version.

Regards
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FC6 Xserver GUI running but no mouse/keyboard control yubashi Linux - Software 1 05-01-2007 09:32 AM
logitech keyboard and mouse stopped responding Shankarrajus Linux - Hardware 1 04-07-2006 09:30 AM
Why my mouse, keyboard,... stopped!!! hermouche Linux - Newbie 2 09-07-2005 11:14 AM
keyboard and mouse stopped working completely in kernel 2.6.9-5.ELsmp Antony_wind Linux - Software 3 08-26-2005 01:56 PM
Keyboard stopped working after Xfree86 Update doslucky Linux - Hardware 2 10-24-2004 02:11 PM


All times are GMT -5. The time now is 10:17 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration