LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 01-18-2004, 02:24 PM   #1
neuroticnumbnut
LQ Newbie
 
Registered: Jan 2004
Posts: 8

Rep: Reputation: 0
K3b help


im getting this message when i open K3b:

No support for ATAPI with cdrdao
You will not be able to use all your reading devices as copy sources since there is at least one not configured to use SCSI emulation and your system does not support ATAPI with cdrdao.
Solution: The best and recommended solution is to enable ide-scsi (SCSI emulation) for all writer devices. This way you won't have any problems.

how would enable the scsi emulation?
 
Old 01-18-2004, 02:30 PM   #2
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 14.04
Posts: 1,534

Rep: Reputation: 44
I get that too. I presume it refers to my DVD reader, as my Sony writer works fine, but I have to use it to read in, then write.
I've got a feeling you have to put enable ide-scsi in your /etc/modules.conf, but don't quote me on that! Let me know how you get on!
 
Old 01-18-2004, 02:41 PM   #3
Skyline
Senior Member
 
Registered: Jun 2003
Distribution: Debian/other
Posts: 2,104

Rep: Reputation: 45
Put

hdx=ide-scsi

(hdc if on hdc etc - check your dmesg)

in the relevant append line in lilo.conf

ie for example

append="devfs=mount hdc=ide-scsi acpi=off quiet"

or with grub.conf, in the relevant kernel line

ie for example

kernel /boot/vmlinuz-2.4.18-4 ro root=/dev/hdc1 hdd=ide-scsi

remeber also to check for the new device name when the scsi driver is loaded, your drive will probably then be recognised as /dev/sr0 ( or something similar ) - check dmesg again

Last edited by Skyline; 01-18-2004 at 02:51 PM.
 
Old 01-18-2004, 03:04 PM   #4
neuroticnumbnut
LQ Newbie
 
Registered: Jan 2004
Posts: 8

Original Poster
Rep: Reputation: 0
i looked in lilo.conf and i cant find anywhere in there a line with hdc in it. so should i put and append statement under one of the images?
 
Old 01-18-2004, 03:43 PM   #5
neuroticnumbnut
LQ Newbie
 
Registered: Jan 2004
Posts: 8

Original Poster
Rep: Reputation: 0
i tried putting:

append="devfs=mount hdc=ide-scsi acpi=off quiet"

in my lilo.conf neither worked. this is my lilo.conf:

boot=/dev/hda
map=/boot/map
vga=normal
default="linux"
keytable=/boot/us.klt
prompt
nowarn
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
image=/boot/vmlinuz
label="linux"
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdd=ide-scsi acpi=ht splash=silent"
append="devfs=mount hdc=ide-scsi acpi=off quiet"
vga=788
read-only
image=/boot/vmlinuz
label="linux-nonfb"
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdd=ide-scsi acpi=ht"
read-only
image=/boot/vmlinuz
label="failsafe"
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdd=ide-scsi acpi=ht"
read-only
other=/dev/hda1
label="windows"
table=/dev/hda
other=/dev/fd0
label="floppy"
unsafe

should i change the hdd to hdc?

also my dmesg says:

hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive

down a little....

hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-16102B Rev: OS0E
Type: CD-ROM ANSI SCSI revision: 02
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
 
Old 01-18-2004, 03:44 PM   #6
HappyTux
Senior Member
 
Registered: Mar 2003
Location: Nova Scotia, Canada
Distribution: Debian AMD64
Posts: 3,584

Rep: Reputation: 94
Quote:
Originally posted by neuroticnumbnut
i looked in lilo.conf and i cant find anywhere in there a line with hdc in it. so should i put and append statement under one of the images?
Code:
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
#vga=normal
vga=792
# Kernel command line options that apply to all installed images go
# here.  See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""
append="hdc=ide-scsi apm=on"

# Boot up Linux by default.
#
default=Linux

image=/vmlinuz
        label=Linux
        read-only
#       restricted
#       alias=1

image=/vmlinuz.old
        label=LinuxOLD
        read-only
        optional
#       restricted
#       alias=2

image=/vmlinuz.failsafe
        label=LinuxFailsafe
        read-only
        optional

# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
other=/dev/hdb
        label=KDE_CVS
#       restricted
#       alias=3
 
Old 01-18-2004, 06:35 PM   #7
Skyline
Senior Member
 
Registered: Jun 2003
Distribution: Debian/other
Posts: 2,104

Rep: Reputation: 45
Quote:
i tried putting:

append="devfs=mount hdc=ide-scsi acpi=off quiet"

in my lilo.conf neither worked. this is my lilo.conf
Uhmm...... no - you've completely misunderstood... ??

The instruction was to put the kernel parameter in the relevant append line - not the whole example line itself that was given as an example - notice the words " for example" and previous to that " put hdx=ide-scsi in the relevant append line........"

Is the burner on hdc or hdd ?? - if this hasn't been edited ??

Quote:
hdd: attached ide-scsi driver
there's scsi emulation for hdd...........
 
Old 01-19-2004, 01:48 PM   #8
neuroticnumbnut
LQ Newbie
 
Registered: Jan 2004
Posts: 8

Original Poster
Rep: Reputation: 0
hdd is the burner and hdc is the cdrom
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Will k3b convert mp3's to wavs for burning audio cds? And prob with k3b 0.11 Alvis Linux - Software 5 08-02-2007 07:38 AM
FC3 - K3b not recognizing mp3s w/ k3b-mp3 installed! Forezt Linux - Software 2 07-25-2006 05:43 PM
2.6.3 + KDE 3.2 + K3b 0.11.4 = PROBLEMS (K3b) svarreby Slackware 2 02-08-2005 09:16 PM
problems installing k3b-mp3 for FC3 and k3b-0.11.18 Rockgod2099 Linux - Software 8 01-09-2005 06:38 PM
K3b only1gameguru Linux - Software 4 11-08-2003 05:26 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 08:46 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration