So here i am with a freshly installed SuSE Linux on my hdb and an installation of Win2k on hda, both living happily together...and suddenly a pleasant surprise! My isdn TA actually WORKS under LINUX! It is configured almost automatically...everything's cool...here i start KInternet...and here i am on the net browsing away and checking my mail!
Just like a dream...that suddenly turns into a nightmare!
As soon as i try to change my connection to configure my account with another provider...BANG! it gives me CHAP identification failed!
Anyway to make a long story short, almost by mistake, i checked the bios, then my hardware configuration on win2000 and on Linux and it appears that the built-in USB hub of the mainboard and my isdn TA share the same IRQ! That was something i had never realized under win2k, but why does it create conflict under Linux? And why should they share the same IRQ?
In the bios i even disabled irq for usb, or forced the irq of the isdn TA from the one of the usb, but it seems useless! whatever irq i set the isdn TA, the usb hub follows it! If i set the TA on 10, the hub sets itself automatically on 10 and so on...
Here is my config:
Minboard: Asus P2 (VIA chipset) upgraded with Viatech 4.29 drivers
BIOS: Award (Fresh from flashing)
Memory: 128 SDRAM
Pointing devices: Logitech MarbleMouse USB using its PS/2 adapter
slot 1,2,3: EMPTY
slot 4: Target World 2000 isdn TA
PCI 1: EMPTY
PCI 2: Creative sbwave 64
AGP: Creative Blaster Riva TNT 16Mb (NVidia Chipset)
If someone could tell me what i have done wrong i would really appreciate it!
Thanks in advance,