kern.debug;kern.info /var/log/firewall.log

#The NAT portion of the ruleset. Used for Network Address Transalation.
#Usually not needed on a typical web server, but it's there if you need it.
*nat
:PREROUTING ACCEPT [127173:7033011]
:POSTROUTING ACCEPT [31583:2332178]
:OUTPUT ACCEPT [32021:2375633]
COMMIT

#The Mangle portion of the ruleset. Here is where unwanted packet types get dropped.
#This helps in making port scans against your server a bit more time consuming and difficult, but not impossible.
*mangle
:PREROUTING ACCEPT [444:43563]
:INPUT ACCEPT [444:43563]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [402:144198]
:POSTROUTING ACCEPT [402:144198]
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,PSH,URG -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,PSH,URG -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,PSH,URG -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,PSH,URG -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP
-A PREROUTING -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP
COMMIT

#The FILTER section of the ruleset is where we initially drop all packets and then selectively open certain ports.
#We will also enable logging of all dropped requests.
*filter
:INPUT DROP [1:242]
:FORWARD DROP [0:0]
:OUTPUT DROP [0:0]
:LOG_DROP - [0:0]
:LOG_ACCEPT - [0:0]
:icmp_packets - [0:0]

#First, we cover the INPUT rules, or the rules for incoming requests.
#Note how at the end we log any incoming packets that are not accepted.
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p tcp -m tcp --dport 20 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 21 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 22 -j LOG_ACCEPT
-A INPUT -p tcp -m tcp --dport 25 -j LOG_ACCEPT
-A INPUT -p tcp -m tcp --dport 43 -j ACCEPT
-A INPUT -p udp -m udp --dport 53 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 110 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 143 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT
#uncomment the next line if you are running Spamassassin on your server
-A INPUT -p tcp -m tcp --dport 783 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 993 -j ACCEPT
-A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT
-A INPUT -s 127.0.0.1 -j ACCEPT
# webmin both interfaces
-A INPUT -p tcp -i eth1 --dport 10000 -j ACCEPT
-A INPUT -p udp -i eth1 --dport 10000 -j ACCEPT
-A INPUT -p tcp -i eth0 --dport 10000 -j ACCEPT
-A INPUT -p udp -i eth0 --dport 10000 -j ACCEPT
-A INPUT -p icmp -j icmp_packets
-A INPUT -j LOG_DROP

#Next, we cover the OUTPUT rules, or the rules for all outgoing traffic.
#Note how at the end we log any outbound packets that are not accepted.
-A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 20 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 21 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 23 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 43 -j ACCEPT
-A OUTPUT -p udp -m udp --dport 53 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 80 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 110 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 143 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT
#uncomment the next line if you are running Spamassassin on your server
-A OUTPUT -p tcp -m tcp --dport 783 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 993 -j ACCEPT
-A OUTPUT -p tcp -m tcp --dport 3306 -j ACCEPT
-A OUTPUT -d 127.0.0.1 -j ACCEPT
-A OUTPUT -p icmp -j icmp_packets
-A OUTPUT -j LOG_DROP

#Here we have 2 sets of logging rules. One for dropped packets to log all dropped requests and one for accepted packets, should we wish to log any accepted requesets.
-A LOG_DROP -j LOG --log-prefix "[IPTABLES DROP] : " --log-tcp-options --log-ip-options
-A LOG_DROP -j DROP

-A LOG_ACCEPT -j LOG --log-prefix "[IPTABLES ACCEPT] : " --log-tcp-options --log-ip-options
-A LOG_ACCEPT -j ACCEPT

#And finally, a rule to deal with ICMP requests. We drop all ping requests except from our own server.
# Make sure you replace 1.2.3.4 with the IP address of your server.
-A icmp_packets -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A icmp_packets -s 1.2.3.4 -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A icmp_packets -p icmp -m icmp --icmp-type 8 -j DROP
-A icmp_packets -p icmp -m icmp --icmp-type 3 -j ACCEPT
-A icmp_packets -p icmp -m icmp --icmp-type 11 -j ACCEPT
COMMIT