LinuxQuestions.org
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

LinuxQuestions.org (/questions/)
-   Linux - Software (https://www.linuxquestions.org/questions/linux-software-2/)
-   -   intel display and wireless driver for debian lenny (https://www.linuxquestions.org/questions/linux-software-2/intel-display-and-wireless-driver-for-debian-lenny-769255/)

peeths003 11-16-2009 12:39 PM
Here I just did a comparison with both the config files for fedora and debian and here is the output


Fedora

Quote:

#
# MPlayer configuration file
#
# Configuration files are read system-wide from /etc/mplayer/mplayer.conf
# and per user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
#
# The configuration file settings are the same as the command line
# options without the preceding '-'.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.


##################
# video settings #
##################

# Specify default video driver (see -vo help for a list).
#vo=xv

# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib

# FBdev driver:
#
# mode to use (read from fb.modes)
#fbmode = 640x480-120
#
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes

# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
#
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
#
# vertical frequency range
#monitor-vfreq = 50-90
#
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M

# Start in fullscreen mode by default.
#fs=yes

# Change to a different videomode when going fullscreen.
#vm=yes

# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0

# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes

# standard monitor size, with square pixels
#monitoraspect=4:3

# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9

# Keep the player window on top of all other windows.
#ontop=yes


##################
# audio settings #
##################

# Specify default audio driver (see -ao help for a list).
#ao=oss

# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd

# Specify the mixer device.
#mixer = /dev/mixer

# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100


##################
# other settings #
##################

# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856

# Drop frames to preserve audio/video sync.
#framedrop = yes

# Specify your preferred skin here (skins are searched for in
# /usr/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss

# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75

# cache settings
#
# Use 8MB input cache by default.
#cache = 8192
#
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
#
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50

# DVD: Display English subtitles if available.
#slang = en

# DVD: Play English audio tracks if available.
#alang = en

###################
# DVDNAV Settings #
###################
#vc=ffmpeg12,
# A plugged in joystick can interfere with keyboard shortcuts
joystick = no

# FriBidi can do "funny" things to some ISO-8859-* subtitles
#flip-hebrew = no

# You can also include other configuration files.
#include = /home/me/.mplayer/something
fontconfig=yes
font="Sans"
ao=pulse,alsa,

Debian


Quote:

#
# MPlayer configuration file
#
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
#
# The configuration file settings are the same as the command line
# options without the preceding '-'.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.


##################
# video settings #
##################

# Specify default video driver (see -vo help for a list).
#vo=xv

# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib

# FBdev driver:
#
# mode to use (read from fb.modes)
#fbmode = 640x480-120
#
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes

# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
#
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
#
# vertical frequency range
#monitor-vfreq = 50-90
#
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M

# Start in fullscreen mode by default.
#fs=yes

# Change to a different videomode when going fullscreen.
#vm=yes

# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0

# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes

# standard monitor size, with square pixels
#monitoraspect=4:3

# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9

# Keep the player window on top of all other windows.
#ontop=yes


##################
# audio settings #
##################

# Specify default audio driver (see -ao help for a list).
ao=alsa,

# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd

# Specify the mixer device.
#mixer = /dev/mixer

# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100


##################
# other settings #
##################

# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856

# Drop frames to preserve audio/video sync.
#framedrop = yes

# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss

# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75

# cache settings
#
# Use 8MB input cache by default.
#cache = 8192
#
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
#
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50

# DVD: Display English subtitles if available.
#slang = en

# DVD: Play English audio tracks if available.
#alang = en

###################
# DVDNAV Settings #
###################
#vc=ffmpeg12,

# get a default OSD font from fontconfig

fontconfig = yes
font = "Sans"
subfont-text-scale = 3

# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include


xorg.conf files

Fedora

Quote:
# Xorg configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "intel"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Debian

Quote:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "intel"
Option "AccelMethod" "XAA"
Option "MigrationHeuristic" "smart"
Option "XAANoOffscreenPixmaps" "true"
EndSection

# Dedicated "Extensions" section
Section "Extensions"
Option "Composite" "enable"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "record"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection


In mplayer.conf file I dont see any change other than joystick=no


and xorg.conf is configured little advances in Debian

jens 11-17-2009 05:02 AM
Ah...
I should have noticed the XAA part in your previous posts (I wrongly assumed you were replacing UXA with EXA).

You can't have both xv and compiz with the old XAA way.

If you really need both compiz and xv you could try using EXA with the following options:

Code:
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Option "ExaNoComposite" "false"

jens 11-17-2009 05:20 AM
Quote:
Originally Posted by peeths003 (Post 3758938)

it works with X11 drivers , but full screen is not available in that
You need the zoom option:
Code:
gmplayer -vo x11 -zoom file.avi
The x11 driver consumes a lot more CPU though.


All times are GMT -5. The time now is 08:34 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page