LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices



Reply
 
Search this Thread
Old 01-08-2010, 04:19 AM   #1
sd9
Member
 
Registered: Apr 2009
Posts: 53

Rep: Reputation: 15
Installing gcc 4.4.2 on Fedora 8


This isn't a question. This forum has given me a lot, and I'd like to contribute back to it.
I've just managed to configure, build and install gcc 4.4.2 on Fedora 8.
I have an Intel Core 2 duo processor, 64 bit.

Given below, are the instructions for installing gcc:

It's very crude, because I was typing out the steps while I was trying to build gcc. Forgive me for that, but I hope it will benefit anyone who is trying to install gcc.

Last edited by sd9; 01-10-2010 at 11:33 PM.
 
Old 01-08-2010, 04:19 AM   #2
sd9
Member
 
Registered: Apr 2009
Posts: 53

Original Poster
Rep: Reputation: 15
I recommend that you go through the entire document first before following the steps (because some steps were performed wrong and corrected later. Other steps were repeated un-necessarily). The steps are numbered as 1., 2., 3. etc.

GCC 4.4.2 installation on Fedora 8:
How I did it:
1. Placed the gcc-4.4.2 folder in home and created a folder called gccbuild in home.
2. typed gcc -v in the terminal and got the following info

Using built-in specs.
Target: i386-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --enable-plugin --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --with-cpu=generic --host=i386-redhat-linux
Thread model: posix
gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)


3. Entered cd gccbuild/
4. Typed ../gcc-4.4.2/configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --enable-plugin --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --with-cpu=generic --host=i386-redhat-linux
5. and got the following message:
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking build system type... i686-pc-linux-gnu
checking host system type... i386-redhat-linux-gnu
checking target system type... i386-redhat-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for i386-redhat-linux-gcc... i386-redhat-linux-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i386-redhat-linux-gcc accepts -g... yes
checking for i386-redhat-linux-gcc option to accept ANSI C... none needed
checking for i386-redhat-linux-g++... i386-redhat-linux-g++
checking whether we are using the GNU C++ compiler... yes
checking whether i386-redhat-linux-g++ accepts -g... yes
checking for i386-redhat-linux-gnatbind... no
checking for gnatbind... no
checking for i386-redhat-linux-gnatmake... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

6. Tried ../gcc-4.4.2/configure --prefix=/opt/
7. and got the following messages:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

8. Tried ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions
9. and got:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

10. Trying ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
11. and got:
e-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

12. downloaded mpfr-2.4.2 from http://www.mpfr.org/
13. logged in as root and extracted the tar.bz2 to /usr/share/doc/
14. entered the mpfr-2.4.2 folder, typed 'configure' and typed 'make'
15. Tried ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2 --with-mpfr=/usr/share/doc/mpfr-2.4.2
16. and got:
e-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2 --with-mpfr=/usr/share/doc/mpfr-2.4.2
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

17. From the /usr/share/doc folder I did an "mv mpfr-2.4.2 /home/username/gcc-4.4.2/mpfr"
18. Tried ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
19. and got:
ibunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gnatbind... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2
checking for version 0.10 of PPL... no
checking for correct version of CLooG... no
The following languages will be built: c,c++,fortran,java,objc
*** This configuration is not supported in the following subdirectories:
target-libada gnattools
(Any other directories should still work fine.)
checking for bison... bison -y
checking for bison... bison
checking for gm4... no
checking for gnum4... no
checking for m4... m4
checking for flex... flex
checking for flex... flex
checking for makeinfo... makeinfo
checking for expect... no
checking for runtest... no
checking for ar... ar
checking for as... as
checking for dlltool... no
checking for ld... ld
checking for lipo... no
checking for nm... nm
checking for ranlib... ranlib
checking for strip... strip
checking for windres... no
checking for windmc... no
checking for objcopy... objcopy
checking for objdump... objdump
checking for cc... cc
checking for c++... c++
checking for gcc... gcc
checking for gcj... gcj
checking for gfortran... gfortran
checking for ar... no
checking for ar... ar
checking for as... no
checking for as... as
checking for dlltool... no
checking for dlltool... no
checking for ld... no
checking for ld... ld
checking for lipo... no
checking for lipo... no
checking for nm... no
checking for nm... nm
checking for objdump... no
checking for objdump... objdump
checking for ranlib... no
checking for ranlib... ranlib
checking for strip... no
checking for strip... strip
checking for windres... no
checking for windres... no
checking for windmc... no
checking for windmc... no
checking where to find the target ar... host tool
checking where to find the target as... host tool
checking where to find the target cc... just compiled
checking where to find the target c++... just compiled
checking where to find the target c++ for libstdc++... just compiled
checking where to find the target dlltool... host tool
checking where to find the target gcc... just compiled
checking where to find the target gcj... just compiled
checking where to find the target gfortran... just compiled
checking where to find the target ld... host tool
checking where to find the target lipo... host tool
checking where to find the target nm... host tool
checking where to find the target objdump... host tool
checking where to find the target ranlib... host tool
checking where to find the target strip... host tool
checking where to find the target windres... host tool
checking where to find the target windmc... host tool
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether -fkeep-inline-functions is supported... yes
configure: creating ./config.status
config.status: creating Makefile

20. Now my gccbuild folder contains : config.log config.status Makefile serdep.tmp
21. Typed make
22. a lot of "checking" lines later I got this:
Configuring stage 1 in ./mpfr
configure: WARNING: unrecognized options: --enable-threads, --enable-checking, --disable-libunwind-exceptions, --enable-languages, --disable-intermodule, --enable-checking, --disable-coverage, --enable-languages
configure: creating cache ./config.cache
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for none-pc-linux-gnu-strip... no
checking for strip... strip
configure: WARNING: using cross tools not prefixed with host triplet
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
configure: error: source directory already configured; run "make distclean" there first
make[2]: *** [configure-stage1-mpfr] Error 1
make[2]: Leaving directory `/home/username/gccbuild'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/home/username/gccbuild'
make: *** [all] Error 2

23. went to the gcc-4.4.2/mpfr/ directory
24. typed "su" and logged in as root user
25. ran "make distclean"
26. Ctrl+d
27. entered the gccbuild folder
28. typed "make distclean"
29. Deleted the rest of the files in the folder
30. ran ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
31. typed make
32. The build process started at 13:15 hrs
33. Build completed 14:19 hrs with the final lines as:
make[5]: Leaving directory `/home/username/gccbuild/i686-pc-linux-gnu/libgomp'
/home/username/gccbuild/./gcc/gfortran -B/home/username/gccbuild/./gcc/ -B/usr/local/i686-pc-linux-gnu/bin/ -B/usr/local/i686-pc-linux-gnu/lib/ -isystem /usr/local/i686-pc-linux-gnu/include -isystem /usr/local/i686-pc-linux-gnu/sys-include -g -O2 -Wall -fsyntax-only omp_lib.f90
make[4]: Leaving directory `/home/username/gccbuild/i686-pc-linux-gnu/libgomp'
make[3]: Leaving directory `/home/username/gccbuild/i686-pc-linux-gnu/libgomp'
make[2]: Leaving directory `/home/username/gccbuild/i686-pc-linux-gnu/libgomp'
make[1]: Leaving directory `/home/username/gccbuild'

34. You can optionally run some tests as specified here: http://gcc.gnu.org/install/test.html
35. Otherwise, in the gccbuild directory, type "su"
36. Log in as root user
37. Type 'make install'
38. The installation procedure will begin. For me, it took two to three minutes.
39. That's it! gcc is installed in your system. You can log out of root with Ctrl+d
40. Type "gcc -v" and you'll see the new version number of gcc Enjoy!!!

Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: ../gcc-4.4.2/configure --prefix=/usr/local --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-checking=release --disable-libunwind-exceptions --with-gmp=/usr/share/doc/gmp-4.2.2
Thread model: posix
gcc version 4.4.2 (GCC)

Last edited by sd9; 01-08-2010 at 06:11 AM.
 
Old 01-08-2010, 05:53 AM   #3
knudfl
LQ 5k Club
 
Registered: Jan 2008
Location: Copenhagen, DK
Distribution: pclos2014.08, Slack14.1 DebWheezy, +50+ other Linux OS, for test only.
Posts: 14,286

Rep: Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664
Nice work. .. Did all tests pass ?

Actually you don't need to build mpfr. AFAIK.
Just unpack it to gcc-4.4.2/ and rename to mpfr/ .

The by gcc recommended build method is here
http://www.linuxfromscratch.org/lfs/...ent/index.html
gcc pass 1.
http://www.linuxfromscratch.org/lfs/...gcc-pass1.html
gcc pass 2.
http://www.linuxfromscratch.org/lfs/...gcc-pass2.html
gcc "pass 3"
http://www.linuxfromscratch.org/lfs/...ter06/gcc.html
QUOTE : "" Important :
In this section, the test suite for GCC is considered critical.
Do not skip it under any circumstance. ""
.....

Last edited by knudfl; 01-08-2010 at 06:00 AM.
 
1 members found this post helpful.
Old 01-08-2010, 06:17 AM   #4
sd9
Member
 
Registered: Apr 2009
Posts: 53

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by knudfl View Post
Nice work. .. Did all tests pass ?
I didn't do the tests yet. I need some additional software for that. I plan to do it soon.

Quote:
Originally Posted by knudfl View Post
Actually you don't need to build mpfr. AFAIK.
Just unpack it to gcc-4.4.2/ and rename to mpfr/ .
That's true. Because I had run make for mpfr, there was an error message shown when I tied to build gcc. I realised the mistake and did a make distclean in the mpfr directory. It's mentioned in steps 23 to 25, and that's the reason I recommended that a person following my steps should first go thru the whole procedure because I had made some mistakes in-between and then corrected it.
But having it this way can help people who might have made the same mistakes as I did, and it'll help them figure out the solution easily.


############# EDIT ################
What exactly did you mean by the tests?
I'm assuming you meant this: http://gcc.gnu.org/install/test.html

But I think you meant what was mentioned here: http://www.linuxfromscratch.org/lfs/...ter06/gcc.html

If it's the latter, then I don't really know how to do those tests, coz the entire installation process had proceeded without any interference from my side.

Last edited by sd9; 01-08-2010 at 06:25 AM.
 
Old 01-08-2010, 07:18 AM   #5
knudfl
LQ 5k Club
 
Registered: Jan 2008
Location: Copenhagen, DK
Distribution: pclos2014.08, Slack14.1 DebWheezy, +50+ other Linux OS, for test only.
Posts: 14,286

Rep: Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664
The gcc tests :
QUOTE from http://www.linuxfromscratch.org/lfs/...ter06/gcc.html :

make -k check

To receive a summary of the test suite results, run:

../gcc-4.4.2/contrib/test_summary
 
1 members found this post helpful.
Old 01-08-2010, 07:28 AM   #6
sd9
Member
 
Registered: Apr 2009
Posts: 53

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by knudfl View Post
The gcc tests :
QUOTE from http://www.linuxfromscratch.org/lfs/...ter06/gcc.html :

make -k check

To receive a summary of the test suite results, run:

../gcc-4.4.2/contrib/test_summary
Yes, I had seen that line...which was why I was a bit apprehensive.
Now that I've installed gcc successfully, will there be any problems if I run this "make -k check"?
And which directory do I run it from?
 
Old 01-08-2010, 10:51 AM   #7
knudfl
LQ 5k Club
 
Registered: Jan 2008
Location: Copenhagen, DK
Distribution: pclos2014.08, Slack14.1 DebWheezy, +50+ other Linux OS, for test only.
Posts: 14,286

Rep: Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664Reputation: 2664
You only have a 'Makefile' / Makefiles in /home/"username"/gccbuild/ ..

So : cd gccbuild/

make -k check
.....
.....

Good luck ! .. .. ..
.....

Last edited by knudfl; 01-08-2010 at 02:50 PM.
 
Old 01-08-2010, 03:46 PM   #8
Elv13
Member
 
Registered: Apr 2006
Location: Montreal,Quebec
Distribution: Gentoo
Posts: 825

Rep: Reputation: 128Reputation: 128
The common post, we just have to do it. Fedora Core 8 is outdated and unsupported. It reached end of life last years and will never be updated. It is highly recommended to upgrade to the newer Fedora 12 version, that comm with GCC 4.4 by default.
 
Old 01-11-2010, 12:19 AM   #9
sd9
Member
 
Registered: Apr 2009
Posts: 53

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by knudfl View Post
You only have a 'Makefile' / Makefiles in /home/"username"/gccbuild/ ..

So : cd gccbuild/

make -k check
.....
.....

Good luck ! .. .. ..
.....
Tried make -k check. It showed "PASS" for many tests and then came to a part where it needed overwriting permissions. So I pressed Ctrl+C, logged in with 'su' and ran "make -k check" again. This time, it gave me:
Code:
Collector appears to work
Completed 368 collections
PASS: gctest
==================
All 1 tests passed
==================
and many more lines later:
Code:
make[1]: Leaving directory `/home/username/gccbuild'
make: *** [do-check] Error 2
make: Target `check' not remade because of errors.
"../gcc-4.4.2/contrib/test_summary" showed nothing.

Did I have to run a make clean before running make -k check the second time?

Last edited by sd9; 01-15-2010 at 05:10 AM.
 
  


Reply

Tags
gcc442


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
offline installing gcc to fedora 10 amira77e Linux - Newbie 1 01-27-2009 04:00 PM
Installing GCC 2.96 on Fedora 6 iamraymond Linux - General 5 03-06-2007 01:23 AM
installing gcc on fedora core 2 TempleOwl1999 Linux - Newbie 9 12-14-2006 07:04 AM
Need help installing GCC on Fedora Core 5 please Antarctica Linux - Software 2 09-04-2006 07:15 PM
First time gcc/g++ installing in Fedora. cigarstub Fedora 1 09-18-2005 12:35 PM


All times are GMT -5. The time now is 11:16 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration