FC4 complete freeze

Azhrarn · 04-14-2006, 02:21 AM

Heya,
I ve installed identical installations of FC on two computers I use as servers, one is an old Proliant 3000, the other is a Sempron.

Now, Sempron works like a dream, and all seemed well on RH till I got to FC4, which freezes randomly, everything crashes, screen won't go on, mouse, keyboard, ping, console, WinSCP, nothing.

This happens after a few hours of work, or even after doing nothing for ages, I return to the office in the morining and find it crashed.

The servers are placed in a 18C vented room, so its not an overheating issue.

I have ripped every single non-standard card from the machine, so the hardware il old but standard and very stable.
None of the Proliant diagnostics reports any hardware issues.
The only wierd part I m running are two IDE HDDs on Software Linux RAID.

I ve seen that other people are having FC4 stability issues, I m running kernel version 2.6.15-1.1831_FC4smp.

I noticed that some of the people with issues are running ATI cards, and so am I, an ATI Mach64 3D RAGE II with default FC4 drivers.

Do you think it is a Kernel issue, a graphics driver issue, or something else?

Please help, its driving me insane.
If I can t solve it, I ll have to flush the server and try FC5, but I d really rather not do that...

Thanks Azh

masand · 04-14-2006, 02:44 AM

Hi there

In such situations logs come in handy

you should try and see for some issues in the logs first

regards

Azhrarn · 04-14-2006, 02:46 AM

Update.

I ve noticed that the freezing occurs when the computer starts running rsync on the RAID 1 hard drives.

Now, since I m assuming that rsync is pretty tested, can I assume that the issue is hardware with one of the HDDs (which would be great, I can solve it real fast, or worse, with Software RAID?

Any help at all will be usefull
thanks
Azh

Azhrarn · 04-14-2006, 03:36 AM

Here s the dmesg
Thanx a mil
Azh

Code:

Linux version 2.6.15-1.1831_FC4smp (bhcompile@tweety.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Tue Feb 7 13:48:31 EST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
 BIOS-e820: 000000001fffc000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f4ff0
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 131068
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 126972 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI not present.
Using APIC driver default
ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f4fd0
  >>> ERROR: Invalid checksum
LAPIC enabled (0), calling get_smp_config
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: COMPAQ   Product ID: PROLIANT     APIC at: 0xFEE00000
Processor #1 6:7 APIC version 16
Processor #0 6:7 APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c045f000 soft=c043f000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 548.686 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 510444k/524272k available (2233k kernel code, 13248k reserved, 837k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1099.13 BogoMIPS (lpj=2198276)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Katmai) stepping 03
Booting processor 1/0 eip 3000
CPU 1 irqstacks, hard=c0460000 soft=c0440000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1097.20 BogoMIPS (lpj=2194405)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Katmai) stepping 03
Total of 2 processors activated (2196.34 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... 
..... (found pin 0) ...works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1780k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0080, last bus=2
PCI: Using configuration type 1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:05.0
PCI: Discovered peer bus 02
PCI BIOS passed nonexistent PCI bus 1!
PCI: Device 0000:00:00.0 not found by BIOS
PCI: Device 0000:00:00.1 not found by BIOS
PCI: Device 0000:00:0f.0 not found by BIOS
PCI: Device 0000:00:11.0 not found by BIOS
PCI: Device 0000:00:11.1 not found by BIOS
PCI: Bridge: 0000:00:06.0
  IO window: 3000-3fff
  MEM window: c6e00000-c6efffff
  PREFETCH window: 30000000-300fffff
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1145008583.620:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key BBAAC818B8690C98
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:11.0 failed with error -22
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: Maxtor 6L160P0, ATA DISK drive
hdb: Maxtor 6Y160P0, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63
hda: cache flushes supported
 hda: hda1
hdb: max request size: 1024KiB
hdb: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63
hdb: cache flushes supported
 hdb: hdb1
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 7, 655360 bytes)
TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 343k
SCSI subsystem initialized
Compaq SMART2 Driver (v 2.6.0)
cpqarray: Device 0xae10 has been found at bus 1 dev 0 func 0
cpqarray: Finding drives on ida0 (Smart Array 3200)
cpqarray ida/c0d0: blksz=512 nr_blks=35561280
 ida/c0d0: p1 p2 p3
sym0: <875> rev 0x14 at pci 0000:02:04.0 irq 15
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.1
sym1: <875> rev 0x14 at pci 0000:02:04.1 irq 11
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 5 roles, 353 types, 1 bools
security:  55 classes, 158849 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
audit(1145008611.286:2): avc:  denied  { net_admin } for  pid=618 comm="udevd" capability=12 scontext=system_u:system_r:udev_t tcontext=system_u:system_r:udev_t tclass=capability
audit(1145008614.626:3): avc:  denied  { sys_nice } for  pid=839 comm="kstopmachine" capability=23 scontext=system_u:system_r:kernel_t tcontext=system_u:system_r:kernel_t tclass=capability
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xe08cef00, 00:50:ba:4a:cb:87, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
tg3.c:v3.47 (Dec 28, 2005)
eth1: Tigon3 [partno(BCM95700A6) rev 7102 PHY(5401)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:04:76:2f:b2:ca
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[0] TSOcap[0] 
eth1: dma_rwctrl[76ff000f]
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: SMB base address uninitialized - upgrade BIOS or use force_addr=0xaddr
ehci_hcd 0000:02:06.2: EHCI Host Controller
ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:06.2: irq 10, io mem 0xc6ffbf00
ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
uhci_hcd 0000:02:06.0: UHCI Host Controller
uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:02:06.0: irq 10, io base 0x00004800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:02:06.1: UHCI Host Controller
uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:02:06.1: irq 10, io base 0x00004820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6 over IPv4 tunneling driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit(1145008621.766:4): avc:  denied  { node_bind } for  pid=1166 comm="arping" saddr=192.168.0.4 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:node_t tclass=udp_socket
mtrr: no more MTRRs available
mtrr: no more MTRRs available
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: md0 stopped.
md: bind<hdb1>
md: bind<hda1>
md: raid1 personality registered as nr 3
raid1: raid set md0 active with 2 out of 2 mirrors
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on ida/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev ida/c0d0p1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT2-fs warning (device md0): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SELinux: initialized (dev md0, type ext2), uses xattr
eth0: no IPv6 routers present
audit(1145001423.189:5): avc:  denied  { write } for  pid=1347 comm="rm" name="gdm" dev=dm-0 ino=97740 scontext=system_u:system_r:initrc_t tcontext=system_u:object_r:var_gdm_t tclass=dir
audit(1145001423.189:6): avc:  denied  { remove_name } for  pid=1347 comm="rm" name=".gdmfifo" dev=dm-0 ino=97729 scontext=system_u:system_r:initrc_t tcontext=system_u:object_r:var_gdm_t tclass=dir
audit(1145001423.189:7): avc:  denied  { unlink } for  pid=1347 comm="rm" name=".gdmfifo" dev=dm-0 ino=97729 scontext=system_u:system_r:initrc_t tcontext=system_u:object_r:var_gdm_t tclass=fifo_file
Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
eth1: no IPv6 routers present
audit(1145001428.773:8): avc:  denied  { sys_nice } for  pid=1642 comm="kstopmachine" capability=23 scontext=system_u:system_r:kernel_t tcontext=system_u:system_r:kernel_t tclass=capability
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
audit(1145001433.549:9): avc:  denied  { name_bind } for  pid=1737 comm="xinetd" src=2401 scontext=system_u:system_r:xinetd_t tcontext=system_u:object_r:port_t tclass=tcp_socket
audit(1145001433.549:10): avc:  denied  { node_bind } for  pid=1737 comm="xinetd" src=2401 scontext=system_u:system_r:xinetd_t tcontext=system_u:object_r:node_t tclass=tcp_socket
audit(1145001440.846:11): avc:  denied  { name_connect } for  pid=1795 comm="smbd" dest=631 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:well_known_tcp_port_t tclass=tcp_socket
audit(1145001441.182:12): avc:  denied  { write } for  pid=1795 comm="smbd" name="group_mapping.tdb" dev=dm-0 ino=66509 scontext=system_u:system_r:smbd_t tcontext=root:object_r:var_lib_t tclass=file
audit(1145001443.722:13): avc:  denied  { search } for  pid=1825 comm="hald-add-selinu" name="seedit" dev=dm-0 ino=1954713 scontext=system_u:system_r:hald_t tcontext=system_u:object_r:etc_selinux_seedit_t tclass=dir
audit(1145001446.382:14): avc:  denied  { write } for  pid=1799 comm="nmbd" name="samba" dev=dm-0 ino=66500 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
audit(1145001446.382:15): avc:  denied  { add_name } for  pid=1799 comm="nmbd" name="browse.dat." scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
audit(1145001446.382:16): avc:  denied  { create } for  pid=1799 comm="nmbd" name="browse.dat." scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
audit(1145001446.382:17): avc:  denied  { write } for  pid=1799 comm="nmbd" name="browse.dat." dev=dm-0 ino=66613 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
audit(1145001446.382:18): avc:  denied  { remove_name } for  pid=1799 comm="nmbd" name="browse.dat" dev=dm-0 ino=66724 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
audit(1145001446.382:19): avc:  denied  { unlink } for  pid=1799 comm="nmbd" name="browse.dat" dev=dm-0 ino=66724 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
audit(1145001446.382:20): avc:  denied  { setattr } for  pid=1799 comm="nmbd" name="browse.dat." dev=dm-0 ino=66613 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
audit(1145001446.382:21): avc:  denied  { rename } for  pid=1799 comm="nmbd" name="browse.dat." dev=dm-0 ino=66613 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
mtrr: no more MTRRs available
mtrr: no more MTRRs available
audit(1145002071.609:22): avc:  denied  { write } for  pid=2266 comm="smbd" name="ntforms.tdb" dev=dm-0 ino=66569 scontext=system_u:system_r:smbd_t tcontext=root:object_r:var_lib_t tclass=file
audit(1145002227.943:23): avc:  denied  { name_connect } for  pid=1796 comm="smbd" dest=631 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:well_known_tcp_port_t tclass=tcp_socket
audit(1145003479.693:24): avc:  denied  { getattr } for  pid=2371 comm="sftp-server" name="/" dev=selinuxfs ino=204 scontext=root:staff_r:staff_t tcontext=system_u:object_r:security_t tclass=dir
audit(1145003479.805:25): avc:  denied  { getattr } for  pid=2371 comm="sftp-server" name="/" dev=autofs ino=4734 scontext=root:staff_r:staff_t tcontext=system_u:object_r:autofs_t tclass=dir
audit(1145003495.914:26): avc:  denied  { syslog_read } for  pid=2410 comm="dmesg" scontext=root:staff_r:staff_t tcontext=system_u:system_r:kernel_t tclass=system
audit(1145003510.555:27): avc:  denied  { write } for  pid=2412 comm="bash" name="root" dev=dm-0 ino=749249 scontext=root:staff_r:staff_t tcontext=system_u:object_r:root_t tclass=dir
audit(1145003510.555:28): avc:  denied  { add_name } for  pid=2412 comm="bash" name="dmesg.txt" scontext=root:staff_r:staff_t tcontext=system_u:object_r:root_t tclass=dir
audit(1145003510.555:29): avc:  denied  { create } for  pid=2412 comm="bash" name="dmesg.txt" scontext=root:staff_r:staff_t tcontext=root:object_r:root_t tclass=file

masand · 04-14-2006, 03:47 AM

hi there

Is this the dmesg output that you get after FC4 freeze?
Well i think that it won;t be possible for you to get the dmesg outoput at that time

So Do this

get the time when your system freezed last and look up and post the log w.r.t. that time from /var/log/messages

regards

Thetargos · 04-14-2006, 03:56 AM

Letme get something straight, is the Proliant or the Sempron server the problem? The dmesg you posted seems to be the one of the Proliant server (SMP PIII system?). Is that the one with the problem?

Azhrarn · 04-14-2006, 08:53 AM

Heya, yeah, the Proliant 3000 is the problem, its a dual P3-550.

I got the msg from the logs, here it the extract from the log leading up the the crash (at 8pm):
Thanks a lot guys!
Azh

Code:

Apr 13 18:05:27 proliant nmbd[1801]: [2006/04/13 18:05:27, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(124) 
Apr 13 18:05:27 proliant nmbd[1801]:   become_logon_server_success: Samba is now a logon server for workgroup TECNOSPAMEC on subnet 192.168.0.3 
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:14): avc:  denied  { write } for  pid=1801 comm="nmbd" name="samba" dev=dm-0 ino=66500 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:15): avc:  denied  { add_name } for  pid=1801 comm="nmbd" name="browse.dat." scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:16): avc:  denied  { create } for  pid=1801 comm="nmbd" name="browse.dat." scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:17): avc:  denied  { write } for  pid=1801 comm="nmbd" name="browse.dat." dev=dm-0 ino=66611 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:18): avc:  denied  { remove_name } for  pid=1801 comm="nmbd" name="browse.dat" dev=dm-0 ino=66724 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=dir
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:19): avc:  denied  { unlink } for  pid=1801 comm="nmbd" name="browse.dat" dev=dm-0 ino=66724 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:20): avc:  denied  { setattr } for  pid=1801 comm="nmbd" name="browse.dat." dev=dm-0 ino=66611 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
Apr 13 18:05:27 proliant kernel: audit(1144944327.431:21): avc:  denied  { rename } for  pid=1801 comm="nmbd" name="browse.dat." dev=dm-0 ino=66611 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:var_lib_t tclass=file
Apr 13 18:05:31 proliant kernel: mtrr: no more MTRRs available
Apr 13 18:05:31 proliant kernel: mtrr: no more MTRRs available
Apr 13 18:05:31 proliant nmbd[1801]: [2006/04/13 18:05:31, 0] nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) 
Apr 13 18:05:31 proliant nmbd[1801]:   ***** 
Apr 13 18:05:31 proliant nmbd[1801]:    
Apr 13 18:05:31 proliant nmbd[1801]:   Samba server PROLIANT is now a domain master browser for workgroup TECNOSPAMEC on subnet 192.168.0.3 
Apr 13 18:05:31 proliant nmbd[1801]:    
Apr 13 18:05:31 proliant nmbd[1801]:   ***** 
Apr 13 18:05:45 proliant nmbd[1801]: [2006/04/13 18:05:45, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) 
Apr 13 18:05:45 proliant nmbd[1801]:   ***** 
Apr 13 18:05:45 proliant nmbd[1801]:    
Apr 13 18:05:45 proliant nmbd[1801]:   Samba name server PROLIANT is now a local master browser for workgroup TECNOSPAMEC on subnet 192.168.0.3 
Apr 13 18:05:45 proliant nmbd[1801]:    
Apr 13 18:05:45 proliant nmbd[1801]:   ***** 
Apr 13 18:53:50 proliant kernel: audit(1144947230.596:22): avc:  denied  { name_connect } for  pid=2396 comm="smbd" dest=631 scontext=system_u:system_r:smbd_t tcontext=system_u:object_r:well_known_tcp_port_t tclass=tcp_socket
Apr 13 18:53:50 proliant smbd[2396]: [2006/04/13 18:53:50, 0] printing/print_cups.c:cups_cache_reload(85) 
Apr 13 18:53:50 proliant smbd[2396]:   Unable to connect to CUPS server localhost - Connection refused 
Apr 13 18:53:50 proliant smbd[2396]: [2006/04/13 18:53:50, 0] printing/print_cups.c:cups_cache_reload(85) 
Apr 13 18:53:50 proliant smbd[2396]:   Unable to connect to CUPS server localhost - Connection refused 
Apr 13 20:00:01 proliant kernel: audit(1144951201.812:23): avc:  denied  { search } for  pid=2678 comm="crond" name="root" dev=dm-0 ino=749249 scontext=system_u:system_r:crond_t tcontext=system_u:object_r:root_t tclass=dir
Apr 14 08:51:54 proliant syslogd 1.4.1: restart.
Apr 14 08:51:54 proliant kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 14 08:51:54 proliant kernel: Linux version 2.6.15-1.1831_FC4smp (bhcompile@tweety.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Tue Feb 7 13:48:31 EST 2006
Apr 14 08:51:54 proliant kernel: BIOS-provided physical RAM map:
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 000000001fffc000 - 0000000020000000 (ACPI data)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Apr 14 08:51:54 proliant kernel:  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Apr 14 08:51:54 proliant kernel: 0MB HIGHMEM available.
Apr 14 08:51:54 proliant kernel: 511MB LOWMEM available.
Apr 14 08:51:55 proliant kernel: found SMP MP-table at 000f4ff0
Apr 14 08:51:55 proliant kernel: Using x86 segment limits to approximate NX protection
Apr 14 08:51:55 proliant kernel: DMI not present.
Apr 14 08:51:55 proliant kernel: Using APIC driver default
Apr 14 08:51:55 proliant kernel:   >>> ERROR: Invalid checksum
Apr 14 08:51:55 proliant kernel: LAPIC enabled (0), calling get_smp_config
Apr 14 08:51:55 proliant kernel: Intel MultiProcessor Specification v1.4
Apr 14 08:51:55 proliant kernel:     Virtual Wire compatibility mode.
Apr 14 08:51:55 proliant kernel: OEM ID: COMPAQ   Product ID: PROLIANT     APIC at: 0xFEE00000
Apr 14 08:51:55 proliant kernel: Processor #1 6:7 APIC version 16
Apr 14 08:51:55 proliant kernel: Processor #0 6:7 APIC version 16
Apr 14 08:51:55 proliant kernel: I/O APIC #8 Version 17 at 0xFEC00000.
Apr 14 08:51:55 proliant kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Apr 14 08:51:55 proliant kernel: Processors: 2

masand · 04-17-2006, 12:02 AM

Well I am not able to look for any thing related to raid or rsnyc here

You need to lookout for other logs in /var/log which can give you more info on this

regards