Dual Monitor and RDP (rdesktop) error
Hi. I have two Nvidia Geforce4 cards, one AGP and one PCI. I used the Nvidia display utilities to enable Xinerama...which appeared to give me the type of display I needed. After implementing that, I attempted connecting to my Windows 2003 Terminal Server and got the following error...
slavojzizek@ashland1 ~]$ rdesktop -f 204.69.225.104
Autoselected keyboard map en-us
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 78 (X_CreateColormap)
Value in failed request: 0x0
Serial number of failed request: 7
Current serial number in output stream: 8
I know this is probably one of the problem-areas, so this is my xorg.conf file:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Nov 9 17:56:12 PST 2006
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1152 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SceptreX9WG-NagaV"
HorizSync 31.0 - 79.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "COMPAQ FS7600"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 4000"
BusID "PCI:0:6:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 4000"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "metamodes" "CRT: 1152x864 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
-------------------------
Any help would be appreciated. The result I want is to be able to remotely connect to my Terminal Server and put that display on either one of my monitors as I see fit.
|