LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (http://www.linuxquestions.org/questions/linux-software-2/)
-   -   configure: error: Package requirements (http://www.linuxquestions.org/questions/linux-software-2/configure-error-package-requirements-797459/)

Sargalus 03-23-2010 11:38 PM

configure: error: Package requirements
 
checking for LIBWNCK... configure: error: Package requirements (gtk+-2.0 >= 2.16.0 glib-2.0 >= 2.16.0 gobject-2.0 >= 2.13.0 libstartup-notification-1.0 xres) were not met:

Requested 'gtk+-2.0 >= 2.16.0' but version of GTK+ is 2.14.7

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBWNCK_CFLAGS
and LIBWNCK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

bash-3.1#

I don't understand why I am getting this error when im trying to install libwnck I have all the required packages installed but keep getting this error message. anyone have any ideas on what Im doing wrong?

Sayan Acharjee 03-23-2010 11:56 PM

Quote:

Originally Posted by Sargalus (Post 3909955)
checking for LIBWNCK... configure: error: Package requirements (gtk+-2.0 >= 2.16.0 glib-2.0 >= 2.16.0 gobject-2.0 >= 2.13.0 libstartup-notification-1.0 xres) were not met:

Requested 'gtk+-2.0 >= 2.16.0' but version of GTK+ is 2.14.7

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBWNCK_CFLAGS
and LIBWNCK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

bash-3.1#

I don't understand why I am getting this error when im trying to install libwnck I have all the required packages installed but keep getting this error message. anyone have any ideas on what Im doing wrong?


This error gtk+-2.0 >= 2.16.0' but version of GTK+ is 2.14.7 shows that you need the Gtk+ 2.16.0, you need to install that first.

Sargalus 03-24-2010 12:06 AM

aahh so I need to download gtk+2.16 and get that installed first?

off topic question
when I try to install libdesktop-agnostic by running the following command

Code:

./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
I get the following

Code:

Configuring libdesktop-agnostic 0.0.1-bzr383-trunk
Checking for program gcc                : ok /usr/bin/gcc
Checking for program cpp                : ok /usr/bin/cpp
Checking for program ar                  : ok /usr/bin/ar
Checking for program ranlib              : ok /usr/bin/ranlib
Checking for gcc                        : ok 
Checking for program valac              : ok /usr/bin/valac
Checking for gthread-2.0                : ok
Checking for program version valac >= 0.1.6 : ok 0.7.10
Checking for program python                : ok /usr/bin/python
Checking for gmodule-2.0 >= 2.6.0          : ok
Checking for glib-2.0 >= 2.10.0            : ok
Checking for gobject-2.0 >= 2.12.0          : ok
Checking for library m                      : ok
Checking for gdk-2.0 >= 2.12.0              : ok
Checking for gtk+-2.0 >= 2.12.0            : ok
Checking for glib-2.0 >= 2.14.0            : ok
Checking for gconf-2.0                      : not found
 error: the configuration failed (see '/root/libdesktop-agnostic/build/config.log')

I have double checked and I have gconf installed I have gconfig-2.6*.txz installed and I have no clue why Im getting this error message it's not making sense.

Sayan Acharjee 03-24-2010 12:11 AM

Yes you need to install gtk+ 2.16 first.
Quote:

Originally Posted by Sargalus (Post 3909983)
aahh so I need to download gtk+2.16 and get that installed first?

off topic question
when I try to install libdesktop-agnostic by running the following command

Code:

./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
I get the following

Code:

Configuring libdesktop-agnostic 0.0.1-bzr383-trunk
Checking for program gcc                : ok /usr/bin/gcc
Checking for program cpp                : ok /usr/bin/cpp
Checking for program ar                  : ok /usr/bin/ar
Checking for program ranlib              : ok /usr/bin/ranlib
Checking for gcc                        : ok 
Checking for program valac              : ok /usr/bin/valac
Checking for gthread-2.0                : ok
Checking for program version valac >= 0.1.6 : ok 0.7.10
Checking for program python                : ok /usr/bin/python
Checking for gmodule-2.0 >= 2.6.0          : ok
Checking for glib-2.0 >= 2.10.0            : ok
Checking for gobject-2.0 >= 2.12.0          : ok
Checking for library m                      : ok
Checking for gdk-2.0 >= 2.12.0              : ok
Checking for gtk+-2.0 >= 2.12.0            : ok
Checking for glib-2.0 >= 2.14.0            : ok
Checking for gconf-2.0                      : not found
 error: the configuration failed (see '/root/libdesktop-agnostic/build/config.log')

I have double checked and I have gconf installed I have gconfig-2.6*.txz installed and I have no clue why Im getting this error message it's not making sense.

i can see from the code above it is searching for gconf-2.0 not gconfig-2.0 , why don't you check this file: /root/libdesktop-agnostic/build/config.log for error logs.

Sargalus 03-24-2010 12:14 AM

yeah I gconfig-2.0 is a typo this is the exact package I have installed gconf-2.26.2-i486-3as.txz

I have looked in the config log but im not that experienced on what exactly I should be looking for, below I posted the config.log

Code:

# project libdesktop-agnostic (0.0.1-bzr383-trunk) configured on Tue Mar 23 21:59:42 2010 by
# waf 1.5.8 (abi 7, python 20602f0 on linux2)
# using ./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
#
Checking for program gcc

find program='gcc' paths=[] var='CC' -> '/usr/bin/gcc'

Checking for program cpp

find program='cpp' paths=[] var='CPP' -> '/usr/bin/cpp'

Checking for program ar

find program='ar' paths=[] var='AR' -> '/usr/bin/ar'

Checking for program ranlib

find program='ranlib' paths=[] var='RANLIB' -> '/usr/bin/ranlib'

Checking for gcc

Checking for program valac

find program='valac' paths=[] var='VALAC' -> '/usr/bin/valac'

Checking for gthread-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gthread-2.0
Checking for program version valac >= 0.1.6

Checking for program python

find program='python' paths=[] var='PYTHON' -> '/usr/bin/python'

Checking for gmodule-2.0 >= 2.6.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.6.0 gmodule-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gmodule-2.0
Checking for glib-2.0 >= 2.10.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.10.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gobject-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gobject-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gobject-2.0
Checking for library m

==>

int main() {
        return 0;
}

<==
[1/2] cc: build/.conf_check_0/test.c -> build/.conf_check_0/testbuild/default/test_1.o
['/usr/bin/gcc', '../test.c', '-c', '-o', 'default/test_1.o']
[2/2] cc_link: build/.conf_check_0/testbuild/default/test_1.o -> build/.conf_check_0/testbuild/default/testprog
['/usr/bin/gcc', 'default/test_1.o', '-o', 'default/testprog', '-Wl,-Bdynamic', '-lm']
Checking for gdk-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gdk-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gdk-2.0
Checking for gtk+-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gtk+-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gtk+-2.0
Checking for glib-2.0 >= 2.14.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.14.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gconf-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gconf-2.0


Sayan Acharjee 03-24-2010 12:20 AM

Quote:

Originally Posted by Sargalus (Post 3909988)
yeah I gconfig-2.0 is a typo this is the exact package I have installed gconf-2.26.2-i486-3as.txz

I have looked in the config log but im not that experienced on what exactly I should be looking for, below I posted the config.log

Code:

# project libdesktop-agnostic (0.0.1-bzr383-trunk) configured on Tue Mar 23 21:59:42 2010 by
# waf 1.5.8 (abi 7, python 20602f0 on linux2)
# using ./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
#
Checking for program gcc

find program='gcc' paths=[] var='CC' -> '/usr/bin/gcc'

Checking for program cpp

find program='cpp' paths=[] var='CPP' -> '/usr/bin/cpp'

Checking for program ar

find program='ar' paths=[] var='AR' -> '/usr/bin/ar'

Checking for program ranlib

find program='ranlib' paths=[] var='RANLIB' -> '/usr/bin/ranlib'

Checking for gcc

Checking for program valac

find program='valac' paths=[] var='VALAC' -> '/usr/bin/valac'

Checking for gthread-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gthread-2.0
Checking for program version valac >= 0.1.6

Checking for program python

find program='python' paths=[] var='PYTHON' -> '/usr/bin/python'

Checking for gmodule-2.0 >= 2.6.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.6.0 gmodule-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gmodule-2.0
Checking for glib-2.0 >= 2.10.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.10.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gobject-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gobject-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gobject-2.0
Checking for library m

==>

int main() {
        return 0;
}

<==
[1/2] cc: build/.conf_check_0/test.c -> build/.conf_check_0/testbuild/default/test_1.o
['/usr/bin/gcc', '../test.c', '-c', '-o', 'default/test_1.o']
[2/2] cc_link: build/.conf_check_0/testbuild/default/test_1.o -> build/.conf_check_0/testbuild/default/testprog
['/usr/bin/gcc', 'default/test_1.o', '-o', 'default/testprog', '-Wl,-Bdynamic', '-lm']
Checking for gdk-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gdk-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gdk-2.0
Checking for gtk+-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gtk+-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gtk+-2.0
Checking for glib-2.0 >= 2.14.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.14.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gconf-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gconf-2.0


You need to install updated versions of glib. gmodule, gobject and gconfig.

Sargalus 03-24-2010 12:24 AM

Quote:

Originally Posted by sayan_acharjee (Post 3909994)
You need to install updated versions of glib. gmodule, gobject and gconfig.

cool, thanks bro, Im going to work on that now, I would update the whole system to slackware-current, but when I do that, it messes up my whole system and when it boots up, it boots up about half then monitor flashes and then blacks out, no idea why, and I can't get back into it and have to reinstall all over, it's like there's a package in slackware-current that crashes my resolution or something, but glib, gmodule, and all that junk should be in the slackware/l of slackware-current correct?

Sayan Acharjee 03-24-2010 12:28 AM

It was my pleasure. :)
Yes, you should get the updated versions of these packages in current slackware, which is 13, I guess.
P.S. Never tried slackware, but I'm on my way to give it a try :D

Sargalus 03-24-2010 12:34 AM

Quote:

Originally Posted by sayan_acharjee (Post 3910004)
It was my pleasure. :)
Yes, you should get the updated versions of these packages in current slackware, which is 13, I guess.
P.S. Never tried slackware, but I'm on my way to give it a try :D

I love it, IMO it's the most stable distro, you just run into the issues Im having, 13 is the latest stable release which doesn't have the updated versions I need, the ones I need I believe are in the slackware-current which have been updated since 13 was released.

Sayan Acharjee 03-24-2010 12:37 AM

Quote:

Originally Posted by Sargalus (Post 3910013)
I love it, IMO it's the most stable distro, you just run into the issues Im having, 13 is the latest stable release which doesn't have the updated versions I need, the ones I need I believe are in the slackware-current which have been updated since 13 was released.

Thanks for the info. ;)

Sargalus 03-24-2010 01:03 AM

Ok I just updated all the files and everything installed just fine expect of course libdesktop-agnostic

it's not reconizing all the new updates of glib and all that good stuff, because it's still thinks the old ones are installed, below is a post of what the out come is and the log file

Code:

bash-3.1# ./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
Configuring libdesktop-agnostic 0.0.1-bzr383-trunk
Checking for program gcc                : ok /usr/bin/gcc
Checking for program cpp                : ok /usr/bin/cpp
Checking for program ar                  : ok /usr/bin/ar
Checking for program ranlib              : ok /usr/bin/ranlib
Checking for gcc                        : ok 
Checking for program valac              : ok /usr/bin/valac
Checking for gthread-2.0                : ok
Checking for program version valac >= 0.1.6 : ok 0.7.10
Checking for program python                : ok /usr/bin/python
Checking for gmodule-2.0 >= 2.6.0          : ok
Checking for glib-2.0 >= 2.10.0            : ok
Checking for gobject-2.0 >= 2.12.0          : ok
Checking for library m                      : ok
Checking for gdk-2.0 >= 2.12.0              : ok
Checking for gtk+-2.0 >= 2.12.0            : ok
Checking for glib-2.0 >= 2.14.0            : ok
Checking for gconf-2.0                      : not found
 error: the configuration failed (see '/root/libdesktop-agnostic/build/config.log')
bash-3.1#

Log file
Code:

bash-3.1# cat build/config.log
# project libdesktop-agnostic (0.0.1-bzr383-trunk) configured on Tue Mar 23 23:00:21 2010 by
# waf 1.5.8 (abi 7, python 20602f0 on linux2)
# using ./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib
#
Checking for program gcc

find program='gcc' paths=[] var='CC' -> '/usr/bin/gcc'

Checking for program cpp

find program='cpp' paths=[] var='CPP' -> '/usr/bin/cpp'

Checking for program ar

find program='ar' paths=[] var='AR' -> '/usr/bin/ar'

Checking for program ranlib

find program='ranlib' paths=[] var='RANLIB' -> '/usr/bin/ranlib'

Checking for gcc

Checking for program valac

find program='valac' paths=[] var='VALAC' -> '/usr/bin/valac'

Checking for gthread-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gthread-2.0
Checking for program version valac >= 0.1.6

Checking for program python

find program='python' paths=[] var='PYTHON' -> '/usr/bin/python'

Checking for gmodule-2.0 >= 2.6.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.6.0 gmodule-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gmodule-2.0
Checking for glib-2.0 >= 2.10.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.10.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gobject-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gobject-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gobject-2.0
Checking for library m

==>

int main() {
        return 0;
}

<==
[1/2] cc: build/.conf_check_0/test.c -> build/.conf_check_0/testbuild/default/test_1.o
['/usr/bin/gcc', '../test.c', '-c', '-o', 'default/test_1.o']
[2/2] cc_link: build/.conf_check_0/testbuild/default/test_1.o -> build/.conf_check_0/testbuild/default/testprog
['/usr/bin/gcc', 'default/test_1.o', '-o', 'default/testprog', '-Wl,-Bdynamic', '-lm']
Checking for gdk-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gdk-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gdk-2.0
Checking for gtk+-2.0 >= 2.12.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.12.0 gtk+-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs gtk+-2.0
Checking for glib-2.0 >= 2.14.0

pkg-config --errors-to-stdout --print-errors --atleast-version=2.14.0 glib-2.0
pkg-config --errors-to-stdout --print-errors --cflags --libs glib-2.0
Checking for gconf-2.0

pkg-config --errors-to-stdout --print-errors --cflags --libs gconf-2.0
bash-3.1#

so once again, no clue wtf is going on and why it's not detecting the updated packages.

knudfl 03-24-2010 07:32 AM

Ref. your other thread
http://www.linuxquestions.org/questi...on-xdg-797210/
No need to start a new thread with the same subject.

So you do have Slackware 13. Please always describe OS in post # 1.
Then libwnck-2.22.3 is the choice. No need to change glib, etc.
http://ftp.acc.umu.se/pub/gnome/sources/libwnck/2.22/
# src2pkg libwnck-2.22.3.tar.bz2 >> libwnck-2.22.3-i486-1.tgz

gobject-introspection-0.6.9-i486-1.tgz : also created with src2pkg .

'bzr' >> bazaar-1.18-x86-1ng.txz, slacky.eu, can be used instead of the bzr package.
libgtop-2.28.0-i486-1mch.txz , slacky.eu.
vala : vala-0.7.8-2pclos2010.i586.rpm , libvala0-0.7.8-2pclos2010.i586.rpm
rpm2tgz <package.rpm> , to get :
vala-0.7.8-2pclos2010.i586.tgz , libvala0-0.7.8-2pclos2010.i586.tgz
( None of the Slackware vala packages worked.)
http://spout.ussg.indiana.edu/linux/...s2010.i586.rpm
http://spout.ussg.indiana.edu/linux/...s2010.i586.rpm
.....
Code:

ls -tl /var/log/packages/ | head -10
-rw-r--r-- 1 root root    2874 2010-03-24 12:44 avant-window-navigator-0.4.0.rc1-i486-1
-rw-r--r-- 1 root root  12208 2010-03-24 12:21 libwnck-2.22.3-i486-1
-rw-r--r-- 1 root root    6364 2010-03-24 12:12 gobject-introspection-0.6.9-i486-1
-rw-r--r-- 1 root root    300 2010-03-24 11:45 libvala0-0.7.8-2pclos2010.i586
-rw-r--r-- 1 root root    7412 2010-03-24 11:41 vala-0.7.8-2pclos2010.i586
-rw-r--r-- 1 root root  11161 2010-03-24 11:32 gconf-2.26.2-i486-3as
-rw-r--r-- 1 root root    1793 2010-03-24 11:24 src2pkg-helpers-1.0-i486-1
-rw-r--r-- 1 root root    9451 2010-03-24 11:19 src2pkg-2.1-noarch-7
-rw-r--r-- 1 root root  114623 2010-03-24 11:09 bzr-2.0.3-i486-1_SBo
-rw-r--r-- 1 root root  13691 2010-03-24 11:01 libgtop-2.28.0-i486-1mch

( src2pkg was updated.)
.....

Sargalus 03-24-2010 10:48 AM

I got all those above packages installed either via packages already made or just from source, the issue is coming from libdesktop-agnostic when Im running the following command.

./waf configure --prefix=/usr --config-backends=gconf --vfs-backends=gio --desktop-entry-backends=glib

but I was a dummy and upgraded everything to slackware-current forgetting that it screws up my display causing me to reinstall so now I get to redo everything.

Sargalus 03-24-2010 12:16 PM

Quote:

Originally Posted by knudfl (Post 3910282)
Ref. your other thread
http://www.linuxquestions.org/questi...on-xdg-797210/
No need to start a new thread with the same subject.

So you do have Slackware 13. Please always describe OS in post # 1.
Then libwnck-2.22.3 is the choice. No need to change glib, etc.
http://ftp.acc.umu.se/pub/gnome/sources/libwnck/2.22/
# src2pkg libwnck-2.22.3.tar.bz2 >> libwnck-2.22.3-i486-1.tgz

gobject-introspection-0.6.9-i486-1.tgz : also created with src2pkg .

'bzr' >> bazaar-1.18-x86-1ng.txz, slacky.eu, can be used instead of the bzr package.
libgtop-2.28.0-i486-1mch.txz , slacky.eu.
vala : vala-0.7.8-2pclos2010.i586.rpm , libvala0-0.7.8-2pclos2010.i586.rpm
rpm2tgz <package.rpm> , to get :
vala-0.7.8-2pclos2010.i586.tgz , libvala0-0.7.8-2pclos2010.i586.tgz
( None of the Slackware vala packages worked.)
http://spout.ussg.indiana.edu/linux/...s2010.i586.rpm
http://spout.ussg.indiana.edu/linux/...s2010.i586.rpm
.....
Code:

ls -tl /var/log/packages/ | head -10
-rw-r--r-- 1 root root    2874 2010-03-24 12:44 avant-window-navigator-0.4.0.rc1-i486-1
-rw-r--r-- 1 root root  12208 2010-03-24 12:21 libwnck-2.22.3-i486-1
-rw-r--r-- 1 root root    6364 2010-03-24 12:12 gobject-introspection-0.6.9-i486-1
-rw-r--r-- 1 root root    300 2010-03-24 11:45 libvala0-0.7.8-2pclos2010.i586
-rw-r--r-- 1 root root    7412 2010-03-24 11:41 vala-0.7.8-2pclos2010.i586
-rw-r--r-- 1 root root  11161 2010-03-24 11:32 gconf-2.26.2-i486-3as
-rw-r--r-- 1 root root    1793 2010-03-24 11:24 src2pkg-helpers-1.0-i486-1
-rw-r--r-- 1 root root    9451 2010-03-24 11:19 src2pkg-2.1-noarch-7
-rw-r--r-- 1 root root  114623 2010-03-24 11:09 bzr-2.0.3-i486-1_SBo
-rw-r--r-- 1 root root  13691 2010-03-24 11:01 libgtop-2.28.0-i486-1mch

( src2pkg was updated.)
.....

Ok I just followed your instructions from this post and after I did the src2pkg and rpm2tgz and went to install the new *tgz packages I get the following

Code:

bash-3.1# installpkg gobject-introspection-0.6.9-i486-1.tgz
Verifying package gobject-introspection-0.6.9-i486-1.tgz.

gzip: stdin: not in gzip format
Installing package gobject-introspection-0.6.9-i486-1.tgz:
PACKAGE DESCRIPTION:
WARNING:  Package has not been created with 'makepkg'
Package gobject-introspection-0.6.9-i486-1.tgz installed.

bash-3.1#

is the WARNING: Package has not been created with 'makepkg' something to worry about or can it be ignored?

knudfl 03-24-2010 01:37 PM

A warning is not an error, is usually information only.

Reason for for the warning : probably a minor change in the
pkgtool scripts, or in src2pkg, may be an insignificant bug.
I saw no warnings in Slackware 13.

.....


All times are GMT -5. The time now is 01:26 PM.