LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (http://www.linuxquestions.org/questions/linux-software-2/)
-   -   collect2: ld returned 1 exit status (http://www.linuxquestions.org/questions/linux-software-2/collect2-ld-returned-1-exit-status-296586/)

abirami 03-02-2005 01:07 AM

collect2: ld returned 1 exit status
 
i am trying to compile redboot bootloader

when i give make i get the followowing error

/usr/local/bin/sh4-linux-gcc -c -I/opt/sh-redboot/install/include -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/src -I/home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/tests -I. -finline-limit=7000 -ml -m3 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -ggdb -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -o /opt/sh-redboot/install/lib/version.o /home/abirami/hitachi/final/ecos-latest/ecos/packages/redboot/current/src/version.c
/usr/local/bin/sh4-linux-gcc -ml -m3 -ggdb -nostdlib -Wl,--gc-sections -Wl,-static -L/opt/sh-redboot/install/lib -Ttarget.ld -o /opt/sh-redboot/install/bin/redboot.elf /opt/sh-redboot/install/lib/version.o
/home/cross/tools/bin/sh-linux-ld: warning: no memory region specified for section `.got'
/home/cross/tools/bin/sh-linux-ld: warning: no memory region specified for section `.got.plt'
/home/cross/tools/bin/sh-linux-ld: section .got [000000008001cbe0 -> 000000008001cbe7] overlaps section .data [000000008001cbe0 -> 000000008001dcdf]
/home/cross/tools/bin/sh-linux-ld: section .got.plt [000000008001cbe8 -> 000000008001cbf3] overlaps section .data [000000008001cbe0 -> 000000008001dcdf]
collect2: ld returned 1 exit status
make[1]: *** [/opt/sh-redboot/install/bin/redboot.elf] Error 1
make[1]: Leaving directory `/opt/sh-redboot/redboot/current'
make: *** [build] Error 2


when i give sh-linux-ld --verbose , this is the result

GNU ld version 2.13.2
Supported emulations:
shlelf_linux
shelf_linux
using internal linker script:
==================================================
/* Script for -z combreloc: combine and sort reloc sections */
OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux",
"elf32-sh-linux")
OUTPUT_ARCH(sh)
ENTRY(_start)
SEARCH_DIR("/home/cross/tools//sh-linux/lib");
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = 0x400000 + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rel.dyn :
{
*(.rel.init)
*(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
*(.rel.fini)
*(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
*(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
*(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
*(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
*(.rel.ctors)
*(.rel.dtors)
*(.rel.got)
*(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
*(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
*(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
*(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
*(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
}
.rela.dyn :
{
*(.rela.init)
*(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
*(.rela.fini)
*(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
*(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
*(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
*(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
*(.rela.ctors)
*(.rela.dtors)
*(.rela.got)
*(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
*(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
*(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
*(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
*(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
}
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init :
{
KEEP (*(.init))
} =0
.plt : { *(.plt) }
.text :
{
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
} =0
.fini :
{
KEEP (*(.fini))
} =0
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
.rodata1 : { *(.rodata1) }
.sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
.sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
. = ALIGN(0x10000) + (. & (0x10000 - 1));
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
PROVIDE (__preinit_array_start = .);
.preinit_array : { *(.preinit_array) }
PROVIDE (__preinit_array_end = .);
PROVIDE (__init_array_start = .);
.init_array : { *(.init_array) }
PROVIDE (__init_array_end = .);
PROVIDE (__fini_array_start = .);
.fini_array : { *(.fini_array) }
PROVIDE (__fini_array_end = .);
.data :
{
__data_start = . ;
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
.tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
.eh_frame : { KEEP (*(.eh_frame)) }
.gcc_except_table : { *(.gcc_except_table) }
.note.ABI-tag : { *(.note.ABI-tag) }
.dynamic : { *(.dynamic) }
.ctors :
{
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
/* We don't want to include the .ctor section from
from the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
}
.dtors :
{
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
}
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.got) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata :
{
*(.sdata .sdata.* .gnu.linkonce.s.*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.sbss :
{
PROVIDE (__sbss_start = .);
PROVIDE (___sbss_start = .);
*(.dynsbss)
*(.sbss .sbss.* .gnu.linkonce.sb.*)
*(.scommon)
PROVIDE (__sbss_end = .);
PROVIDE (___sbss_end = .);
}
.bss :
{
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(32 / 8);
}
. = ALIGN(32 / 8);
_end = .;
PROVIDE (end = .);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}


can anyone solve my problem

thanx in advance


All times are GMT -5. The time now is 03:20 AM.