LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 03-26-2005, 05:42 PM   #1
hacksoft
LQ Newbie
 
Registered: Mar 2005
Posts: 2

Rep: Reputation: 0
Angry Cedega Problems..Running Wc3 FT


Hello there, I have 2 Problems..1 My english is too bad and 2 I cant run WC3 FT with cedega i get some errors..here we go...

here is my config "/root/.transgaming/config"


WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive C]
"Path" = "/root/.transgaming/c_drive"
"Type" = "hd"
"Label" = "Dos Drive"
"Filesystem" = "win95"

[Drive F][Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "DS9TheFallen"
"Filesystem" = "win95"
"Device" = "/dev/cdrom"
"Path" = "c:\\windows\\;c:\\windows\\system32\\"

"Path" = "${HOME}"
"Type" = "hd"
"Label" = "My Home"
"Filesystem" = "win95"

[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "tmp"
"Filesystem" = "win95"

[Drive G]
"Path" = "/"
"Type" = "hd"
"Label" = "root"
"Filesystem" = "win95"

[Drive F]
"Path" = "${HOME}"
"Type" = "hd"
"Label" = "My Home"
"Filesystem" = "win95"

[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system32\\"
"Temp" = "e:\\"
"Path" = "c:\\windows\\;c:\\windows\\system32\\"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;
; Note: The WINESHELLLINK Environment variable will override this setting.
; (which is set in the winex startup script)
;"ShowDirSymlinks" = "1"
"ShellLinker" = "/usr/lib/transgaming_cedega/winex/bin/wineshelllink"
;
; Browser to be used by winebrowserlink.
; Note: The WINEBROWSER Environment variable will override this setting.
;"Browser" = "/usr/bin/konqueror"

# <wineconf>

[DllDefaults]
"DefaultLoadOrder" = "native, builtin, so"

[DllOverrides]
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"oleaut32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"d3d8" = "builtin, native"
"d3drm" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dinput8" = "builtin, native"
"dmusic" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"rpcrt4" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"
"wininet" = "builtin, native"

[Version]
; Windows version to imitate. Valid versions are: 'win20', 'win30', 'win31', 'win95', 'win98', 'winme', 'nt351', 'nt40', 'win2000', 'winxp'
"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Number of colors to copy from the default palette
"CopyDefaultColors" = "0"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "800x600"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "N"
; Use XShm extension if present
"UseXShm" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use XRandR extension if present
"UseXRandR" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "Y"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Use this to make your X server execute all commands
; sequentially rather than buffering commands. Will make
; everything really SLOW but can be nice for debugging.
;; "Synchronous" = "Y"
; Enable the FPS count on the TransGaming HUD (also activates the HUD)
;; "ShowFPS" = "Y"
; Enable memory statistics on the TransGaming HUD (must have ShowFPS activated)
;; "ShowMem" = "Y"
; How much Video RAM does your card have?
"VideoRam" = "32"
; How much should WineX attempt to store into faster AGP memory
"AGPVertexRam" = "16"
; Use NV_VAR (enabled by default)
;;"NV_VAR" = "Y"
; Use ARB_VBO (enabled by default, NV_VAR takes precendence)
;;"ARB_VBO" = "Y"


[d3dgl]
"AnisotropicTextureFiltering" = "N"
"VertexShaders" = "Y"
; type of vertex shaders to use (Hardware/Software/Auto)
; hardware will use whatever the opengl drivers make available
; software will use winex software emulation (will be slow!)
; (has not been implemented yet!)
;; "VertexShaderMode" = "Auto"
"PixelShaders" = "Y"
; Which version of pixel shaders to attempt to use, if available
;;"PixelShadersLevel" = "1.1"
"ClipSpaceFix" = "Y"
; enable software vertex blend weight support (Yes/No/Auto)
; provide software blending fallback if hardware support not available
; (has not been implemented yet!)
;; "SoftwareVertexBlending" = "Auto"
; (dev-only) Maximum number of texture stages that WineX should attempt to use (1-8)
;; "MaxTextureStages" = "8"
; (dev-only) Identify polygons under the mouse cursor
;; "InterceptMode" = "N"
; (dev-only) apply fragment translation in vertex program (Yes/No/Auto)
;;"FragmentOffset" = "Auto"

[dinput]
; dead zone for joystick input from 0 to 10000. 1000 is 10% of range.
"DefaultDeadZone" = "1000"

[joystick]
;; Configuration of the function of joystick axes
;; The joystick name and axis functions can be determined with jstest.
;; The available axis types are:
;; "none", "X", "Y", "Z", "RX", "RY", "RZ",
;; "slider", "hat", "POV", and "ball"
;; "hat" and "POV" are synonymous. Hats use two axes.

"Logitech Inc. WingMan RumblePad" = "X,Y,slider,Z,RZ,hat,none"

[fonts]
;Read documentation/fonts before adding aliases
"Resolution" = "96"
"Default" = "-adobe-times-"
; Use new improved fonts (uses FreeType and XRender libraries) at user request.
; Defaults to "Y".
;"FreeType" = "N"


[FontPatterns]
"Pattern0" = "-adobe-times*"
"Pattern1" = "-adobe-helvetica*"
"Pattern2" = "-adobe-courier*"
"Pattern3" = "-misc-fixed*"

[FontDirs]
;"0"="/path/to/extra/fonts"

[FontAlias]
;; Add font aliases here. On the left put the name of the windows font family
;; that you want to fake, on the right put the a similar font family that you
;; have installed. These will override the fontconfig and the WineX builtin fallbacks,
;; but may look better (if you choose them correctly).
;; Alias' may refer to other alias' that have been defined above them.
;; These alias' are the first that WineX loads.
;;
;; Serif Fonts
;"Times New Roman"="Times"
"MS Serif"="Times New Roman"
;;
;; Sans Serif Fonts
;"Arial"="Helvetica"
"Helv"="Arial"
"MS Sans Serif"="Arial"
"System"="Arial"
"Tahoma"="Arial"
;;
;; Mono Space Fonts
;"Courier New"="Courier"
;"FixedSys"="Courier"

[memory]
;; Attempt to make memory allocation more windows like.
;; Not for use with all applications. Best used in app default section.
; "MemoryLayoutOverride" = "0x10000000"



[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[spooler]
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"

[spy]
"Exclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "n"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "n"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
"WineLook" = "Win98"

[Console]
"Drivers" = "xterm"
;"Drivers" = "tty"
"XtermProg" = "konsole"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files
[afmdirs]
;"1" = "/usr/share/ghostscript/fonts"
;"2" = "/usr/share/a2ps/afm"
;"3" = "/usr/share/enscript"
;"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[Wineserver]
"SHMWineserver" = "Y"

[WinMM]
"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[wineoss]
"UseMMap" = "N"
"FullDuplex" = "N"
;; Specify a mapping for what digital audio devices to use
;"dsp0" = "/dev/dsp0"
;"mixer0" = "/dev/mixer0"

[winealsa]
"UseMMap" = "Y"
;"pcm0" = "hw"
;"ctl0" = "hw"

;; App default settings

;; Battle Field 1942 settings
[AppDefaults\\bf1942.exe\\d3dgl]
"ClipSpaceFix" = "N"

;; Medal Of Honor settings
[AppDefaults\\mohaa.exe\\memory]
"MemoryLayoutOverride" = "0x10000000"
[AppDefaults\\mohaademo.exe\\memory]
"MemoryLayoutOverride" = "0x10000000"

[AppDefaults\\moh_spearhead.exe\\memory]
"MemoryLayoutOverride" = "0x10000000"
[AppDefaults\\moh_spearhead.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\moh_spearhead_demo.exe\\memory]
"MemoryLayoutOverride" = "0x10000000"

;; SimCity 4 settings
[AppDefaults\\SimCity 4.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\SimCity 4.exe\\transgaming]
"cmdlineadd" = "-d:software"

;; Civ 3
[AppDefaults\\Civilization3.exe\\Version]
"Windows" = "win2k"

;; Call of Duty
[AppDefaults\\CoDSP.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CoDMP.exe\\Version]
"Windows" = "win2k"

;; City of Heros
[AppDefaults\\CityOfHeroes.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CityOfHeroes.exe\\cursor]
"CursorAlphaAlwaysOn" = "Y"
[AppDefaults\\CohUpdater.exe\\Version]
"Windows" = "win2k"
[AppDefaults\\CohUpdater.exe\\cursor]
"CursorAlphaAlwaysOn" = "Y"

;; EverQuest
[AppDefaults\\eqgame.exe\\d3dgl]
"ClipSpaceFix" = "N"
"ForceMaxVertexBlendMatrices" = "2"
[AppDefaults\\testeqgame.exe\\d3dgl]
"ClipSpaceFix" = "N"
"ForceMaxVertexBlendMatrices" = "2"

;; Need for Speed Underground
[AppDefaults\\Speed.exe\\d3dgl]
"PixelShaders" = "N"

;; Max Payne 2
[AppDefaults\\MaxPayne2.exe\\d3dgl]
"PixelShaders" = "N"
# </wineconf>




"My windows Directory is in /mnt/c:" just in case.

Ok the error:

root@HaCkSoFt:/mnt/cdrom# cedega autoplay.exe
Your system requires the use of pthreads but the maximum system allowed stack size of 2052 kB may be too small for some games.
If you experience problems, try rerunning with "-use-pthreads no" which may help.
Invalid path 'c:\windows\system32\' for system directory: does not exist
Perhaps you have not properly edited or created your Wine configuration file.
This is (supposed to be) '/root/.transgaming/config'
root@HaCkSoFt:/mnt/cdrom#



*I have Windows XP installed in my other partition* - /dev/hda1 = /mnt/c: -

/etc/fstab

dev/hda3 swap swap defaults 0 0
/dev/hda4 / ext3 defaults 1 1
/dev/hda2 /boot ext3 defaults 1 2
/dev/hda1 /mnt/c: ntfs ro 1 0
/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0






* Please i need help =( *
 
Old 03-27-2005, 02:16 PM   #2
huibert.alblas
Member
 
Registered: Jan 2004
Location: Duesseldorf /Germany
Distribution: Gentoo amd64 / Debian
Posts: 226

Rep: Reputation: 30
Have you tried using Point2play to run the game. It saves a lot of headaches.

BTW, don't _ever_ run anything like wine or cedega as root. You will shoot yourself in the foor one day, trust me.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
wc3 + cedega on laptop blackmailingomen Linux - Software 0 10-22-2005 01:19 PM
Cedega: actually installing/running games jaslowe Linux - Games 3 03-15-2005 01:42 PM
X error when running Cedega PeterWelzien Linux - Software 1 03-12-2005 10:48 AM
Cedega and WC3 troubles zenith_zth Linux - Games 3 11-18-2004 06:42 PM
Cedega and WC3 troubles on SuSE 0.1 zenith_zth Linux - Games 1 10-26-2004 03:27 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 08:46 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration