Hi,
I'm fairly new to writing audio on CDs (indeed, this is my first attempt at doing so), and I'm trying to write 546 MBs of wav files to a CD-R, all audio, by means of cdrdao and a hand-made .toc file. The problem is, however, that while cdrdao treats the cd as written after the operation, the disc cannot be played, and indeed, when the disc is removed and re-inserted, it is treated as empty, though cannot be re-written.
I'm unsure of exactly what logs and other data is necessary for troubleshooting this, but to start, the writing command and log, as copied after the fact:
Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas@daneb.de>
/dev/sr0: MATSHITA DVD-RAM UJ-852S Rev: 1.21
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Code:
$ cdrdao write --device /dev/sr0 --speed 1 TWCDV6CD1.toc
Starting write at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
Enabling JustLink.
ERROR: Cannot set Ricoh mode page 30.
Executing power calibration...
Power calibration successful.
Writing track 01 (mode AUDIO/AUDIO )...
Writing track 02 (mode AUDIO/AUDIO )...
Writing track 03 (mode AUDIO/AUDIO )...
Writing track 04 (mode AUDIO/AUDIO )....
Writing track 05 (mode AUDIO/AUDIO )....
Writing track 06 (mode AUDIO/AUDIO )....
Writing track 07 (mode AUDIO/AUDIO )....
Writing track 08 (mode AUDIO/AUDIO )....
Writing track 09 (mode AUDIO/AUDIO )....
Writing track 10 (mode AUDIO/AUDIO )....
Writing track 11 (mode AUDIO/AUDIO )....
ERROR: Read buffer capacity failed.00%).
Wrote 546 of 546 MB (Buffer 100%).
Wrote 243430 blocks. Buffer fill min 100%/max 100%.
Flushing cache...
Writing finished successfully.
The disc-info immediatley after operation:
Code:
$ cdrdao disk-info
Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas@daneb.de>
/dev/sr0: MATSHITA DVD-RAM UJ-852S Rev: 1.21
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
That data below may not reflect the real status of the inserted medium
if a simulation run was performed before. Reload the medium in this case.
CD-RW : no
Total Capacity : n/a
CD-R medium : CMC Magnetics Corporation
Short Strategy Type, e.g. Phthalocyanine
Recording Speed : n/a
CD-R empty : no
Toc Type : CD-DA or CD-ROM
Sessions : 1
Last Track : 11
Appendable : no
And after re-insertion:
Code:
$ cdrdao disk-info
Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas@daneb.de>
/dev/sr0: MATSHITA DVD-RAM UJ-852S Rev: 1.21
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
That data below may not reflect the real status of the inserted medium
if a simulation run was performed before. Reload the medium in this case.
CD-RW : no
Total Capacity : 79:57:71 (359846 blocks, 702/807 MB)
CD-R medium : CMC Magnetics Corporation
Short Strategy Type, e.g. Phthalocyanine
Recording Speed : n/a
CD-R empty : yes
I hope that's enough to get started. Cheers.