LinuxQuestions.org
Visit Jeremy's Blog.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 04-27-2015, 05:08 AM   #1
madhukumar
LQ Newbie
 
Registered: Nov 2013
Posts: 13

Rep: Reputation: Disabled
booting issue


hello,

i have bug in linux-2.6.25, during booting process it shows inflate returned -3

please give suggestion, following bug as shown below kernel console message

U-Boot 1.3.3 (Apr 16 2015 - 12:05:58)

CPU: Freescale MCF5485
CPU CLK 150 Mhz BUS CLK 75 Mhz
Board-->u-boot.bin-V1.0
SATTVA etech Himagni CPU Board
DRAM: 64 MB
FLASH: 8 MB
In: serial
Out: serial
Err: serial
Net: FEC0, FEC1
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at ff850000 ...
Image Name: Linux Kernel Image
Image Type: M68K Linux Kernel Image (uncompressed)
Data Size: 2244608 Bytes = 2.1 MB
Load Address: 00020000
Entry Point: 00020000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Linux version 2.6.25 (root@localhost.localdomain) (gcc version 4.4.1 (Sourcery G++ Lite 4.4-217) ) #22 Thu Nov 22 16:10:35 IST 2012
starting up linux startmem 0x27c000, endmem 0x4000000, size 61MB
console [ttyS0] enabled
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8156
Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 mtdparts=physmap-flash.0:2560k(kernel)ro,5376k(root) console=ttyS0,19200
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 2, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 1, 16384 bytes)
Memory: 62592k/62592k available (1672k kernel code, 1200k data, 64k init)
SLUB: Genslabs=13, HWalign=16, Order=0-2, MinObjects=8, CPUs=1, Nodes=1
Mount-cache hash table entries: 1024
net_namespace: 152 bytes
NET: Registered protocol family 16
MCF5485x INIT_DEVICES
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 0, 8192 bytes)
TCP established hash table entries: 2048 (order: 1, 16384 bytes)
TCP bind hash table entries: 2048 (order: 0, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
m547x_8x DMA: Initialize Multi-channel DMA API v1.0
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
IOIVME Device Driver Registered with MAJOR = 0
Attached IRQ5 vector=69
Attached IRQ6 vector=70
Attached IRQ7 vector=71
Attached IRQ7 vector=71
IOI Device Driver Registered with MAJOR = 0
RESET Device Driver Registered with MAJOR = 0
RTC driver registered with major = 253
DISP DEVICE DRIVER REGISTERED with major = 254
RTS driver registered with major = 248
WDT DEVICE DRIVER REGISTERED with major = 251
req Device Driver Registered with MAJOR = 246
HIMAGNI MEMORY DEVICE REMAPPED ADDRESS: fc000000
HIMAGNI MEMORY DEVICE REMAPPED ADDRESS: fb000000
HIMAGNI MEMORY DEVICE REMAPPED ADDRESS: fc900000
ColdFire internal UART serial driver version 1.00
ttyS0 at 0xf0008600 (irq = 99) is a builtin ColdFire UART
ttyS1 at 0xf0008700 (irq = 98) is a builtin ColdFire UART
ttyS2 at 0xf0008800 (irq = 97) is a builtin ColdFire UART
ttyS3 at 0xf0008900 (irq = 96) is a builtin ColdFire UART
brd: module loaded
loop: module loaded
FEC ENET (DMA) Version 0.20
eth0: ethernet 00:60:72:00:00:01
eth1: ethernet 00:60:72:00:00:02
physmap platform flash device: 007fffff at ff800000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
NOR chip too large to fit in mapping. Attempting to cope...
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Reducing visibility of 8192KiB chip to 8191KiB
2 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 2 MTD partitions on "physmap-flash.0":
0x00000000-0x00280000 : "kernel"
0x00280000-0x007c0000 : "root"
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFS: Mounted root (jffs2 filesystem).
inflate returned -3
Unable access at virtual address e304186aps: e3062ecb
PC: [<001090b8>] zlib_inflate+0x738/0x14f0<0>
SR: 2000 SP: 0302da68 a2: 0302a000
d0: 000001ff d1: 00000000 d2: 00000003 d3: 20000249
d4: 00000000 d5: 00000100 a0: c004452c a1: c004452c
Process init (pid: 1, stackpage=0302c000)
Stack from 0302da68:
<0> 00000000<0> 00000003<0> 20000249<0> 00000000<0> 00000100<0> c004452c(0xc004452c)<0> c004452c(0xc004452c)<0> 0302a000
<0> 000001ff<0> ffffffff<0> 00000000<0> e304186a<0> 00000000<0> 4c0a2000<0> 001090b8<0> 00000000
<0> 0000001f<0> 00000006<0> 029c4200<0> 03fc4000<0> 0302dbb4<0> 00108980<0> 03041002<0> 000dee9a
<0> 00001000<0> c004452c(0xc004452c)<0> 00000000<0> 0013e34a<0> 03052814<0> c00442ec(0xc00442ec)<0> 00001000<0> 00fc4000
<0> 0000c81c<0> c004452c(0xc004452c)<0> c0044068(0xc0044068)<0> c004406c(0xc004406c)<0> c0044050(0xc0044050)<0> c0044054(0xc0044054)<0> 000001ff<0> c004452c(0xc)
<0> 0026c81c<0> c004452c(0xc004452c)<0> c00442ec(0xc00442ec)<0> c004452c(0xc004452c)<0> 00002504<0> 029ad000<0> 00000000<0> 00000000
Call Trace:
<0> [<000e0736>]<0> [<000d16dc>]<0> [<00069660>]<0> [<000d46c0>]
<0> [<001019e0>]<0> [<0010429e>]<0> [<000d44c0>]<0> [<000d483c>]
<0> [<00052796>]<0> [<0004a652>]<0> [<000d2e22>]<0> [<000d3156>]
<0> [<000d3196>]<0> [<00100100>]<0> [<00051d14>]<0> [<00051aac>]
<0> [<000520e2>]<0> [<00051d50>]<0> [<0004a406>]<0> [<00051d8a>]
<0> [<0004aee4>]<0> [<00056eb0>]<0> [<0003f398>]<0> [<00058372>]
<0> [<00058496>]<0> [<001bf48a>]<0> [<001bfd12>]<0> [<0003f398>]
<0> [<00058372>]<0> [<00022fc6>]<0> [<000251d4>]<0> [<00023952>]
<0> [<0010453c>]<0> [<00098f40>]<0> [<0009a24e>]<0> [<0003f36c>]
<0> [<00046a30>]<0> [<0006fdf4>]<0> [<0006fb7a>]<0> [<00070e00>]
<0> [<00021030>]<0> [<000776c6>]<0> [<000214ae>]<0> [<00048ce2>]
<0> [<00023a56>]<0> [<0003f36c>]<0> [<00021cc2>]<0> [<0002104c>]
<0> [<000210a8>]<0> [<00104098>]<0> [<00023998>]<0> [<00021330>]
Kernel panic - not syncing: Attempted to kill init!
 
Old 04-27-2015, 05:38 AM   #2
veerain
Senior Member
 
Registered: Mar 2005
Location: Earth bound to Helios
Distribution: Custom
Posts: 2,524

Rep: Reputation: 319Reputation: 319Reputation: 319Reputation: 319
Do you have zlib compiled in to kernel? If not compile that into kernel.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Booting issue leo5111 Linux - Hardware 4 08-01-2009 03:10 AM
Issue During Booting ??? your_shadow03 Linux - Newbie 9 09-01-2008 09:35 AM
Booting up issue spicyohaggis Linux - General 3 11-04-2004 10:59 PM
booting new kernel. Booting new kernel dies with INIT: VFS issue, really mus335 Linux - General 0 04-21-2004 11:52 AM
booting issue prufrock Linux - Newbie 2 01-26-2004 08:54 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 01:43 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration