LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Software (http://www.linuxquestions.org/questions/linux-software-2/)
-   -   ATi card, ATI driver & Slackware 10.2 (http://www.linuxquestions.org/questions/linux-software-2/ati-card-ati-driver-and-slackware-10-2-a-424838/)

igor@44 03-14-2006 04:24 PM

ATi card, ATI driver & Slackware 10.2
 
Hi! I have slackware 10.2, kernel 2.4.31, X.org 6.8.2 ATI RADEON 9200 graphic card and I have installed this driver: https://support.ati.com/ics/su...tas...ge&folderID=27 . Games are working :) but everything seems so "zoomed" - when I put 1024x768 (and anything except 1792x1344) it looks awful - zoomed one little window covers my whole desktop, a half of my desktop I can't see ...
This is my xorg file:
Quote:

# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
#Load "speedo"
Load "glx"
Load "dri"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
Identifier "Keyboard1"
Driver "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# On platforms where PnP mouse detection is supported the following
Option "Protocol" "IMPS/2"
# The mouse device. The device is normally set to /dev/mouse,
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.5 - 50.0
VertRefresh 40.0 - 90.0
EndSection

Section "Monitor"
Identifier "aticonfig Monitor 0"
EndSection

Section "Device"

#VideoRam 4096
# Insert Clocks lines here if appropriate
Identifier "VESA Framebuffer"
Driver "vesa"
EndSection

Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "(null)"
Option "DesktopSetup" "horizontal"
Option "OverlayOnCRTC2" "1"
Option "ForceMonitors" "crt2"
BusID "PCI:1:0:0"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Please help me to fix this :(

lestoil 03-14-2006 05:53 PM

What are your monitor or lcd panel specs? Check back or side of montor or google particular model for same info. I mean optimal horiz. and vert. refresh rates. Does your /etc/X11/xorg.conf show those ranges? How much videoram comes on your videocard? Does your /etc/X11/xorg.conf show that? If you fix these settings is your display better? Try it step by step. SW xorgsetup can guess for you but xorgconfig will ask you for required info.

igor@44 03-15-2006 04:02 PM

Thank you. Anyway, can you post default slackware xorg.conf?

igor@44 03-17-2006 09:09 AM

look at my desktop ... it's looks like two monitors ... (I have 17' monitor)
http://img71.imageshack.us/my.php?image=ati16mc.jpg

igor@44 03-17-2006 05:35 PM

can somebody help me?
Quote:

What are your monitor or lcd panel specs? Check back or side of montor or google particular model for same info. I mean optimal horiz. and vert. refresh rates. Does your /etc/X11/xorg.conf show those ranges? How much videoram comes on your videocard? Does your /etc/X11/xorg.conf show that? If you fix these settings is your display better? Try it step by step. SW xorgsetup can guess for you but xorgconfig will ask you for required info.
I tried that but it didn't help.

kak 03-17-2006 07:28 PM

I am running Slack 10.2 with a 2.6.15.6 kernel, same X and a Ati 9000 on my laptop. The resolutions are different but here is my xorg.conf for a reference:
Quote:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "StandbyTime" "2"
Option "Offtime" "5"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

#DisplaySize 290 210 # mm
Identifier "Monitor0"
VendorName "QDS"
ModelName "5"
Option "DPMS" "true"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "no"
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
Option "MonitorLayout" "AUTO,AUTO"
Option "IgnoreEDID" "off"
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "NoMergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "RenderAccel" "true"
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 Lf [Radeon Mobility 9000 M9]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Hope that gives you an idea?!

igor@44 03-19-2006 01:33 PM

I'll give my xorg.conf files.
This is slackware default xorg.conf (without ati support) - it works fine, resolution is fine, screen is fine :
Code:

Section "Module"

    Load        "dbe"          # Double buffer extension

    SubSection  "extmod"
      Option    "omit xfree86-dga"  # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

    Load      "glx"

EndSection

Section "Files"


    RgbPath        "/usr/X11R6/lib/X11/rgb"


    FontPath  "/usr/X11R6/lib/X11/fonts/local/"
    FontPath  "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath  "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath  "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath  "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath  "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath  "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath  "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath  "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath  "/usr/X11R6/lib/X11/fonts/cyrillic/"

EndSection


Section "ServerFlags"

#    Option    "NoTrapSignals"


#    Option    "DontVTSwitch"


#    Option    "DontZap"


#    Option    "DontZoom"

#    Option    "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option    "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option    "DisableModInDev"
.

#    Option    "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes


#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# Option  "EstimateSizesAggresively" "0"

EndSection

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "kbd"


#    Option    "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option    "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option    "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option    "XkbDisable"


EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option    "Protocol"      "Auto"


    Option "Protocol"    "PS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#  Option "Device"      "/dev/psaux"
#  Option "Device"      "/dev/ttyS0"
#  Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"                "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver    "magellan"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver    "spaceorb"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver    "microtouch"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "1412"
#    Option    "MaxX"          "15184"
#    Option    "MinY"          "15372"
#    Option    "MaxY"          "1230"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode" "Scaled"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver    "elo2300"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "231"
#    Option    "MaxX"          "3868"
#    Option    "MinY"          "3858"
#    Option    "MaxY"          "272"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode" "Scaled"
#    Option    "ButtonThreshold"      "17"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync  31.5 - 50.0

#    HorizSync        30-64        # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor    "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#  DefaultDepth 8
#  DefaultDepth 16
  DefaultDepth 24
#  DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth      8
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth      16
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth      24
        Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth      32
        Modes "1024x768" "800x600" "640x480"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

and this is ati config file (it has a problem with resolution):
Code:

Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"  # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load      "glx"
# This loads the DRI module
#    Load      "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath  "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath  "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath  "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath  "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath  "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath  "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath  "/usr/X11R6/lib/X11/fonts/local/"
    FontPath  "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath  "/usr/X11R6/lib/X11/fonts/cyrillic/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option    "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option        "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"        "xorg"
    Option "XkbModel"        "pc104"
    Option "XkbLayout"        "yu"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver    "magellan"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver    "spaceorb"
#    Option    "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver    "microtouch"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "1412"
#    Option    "MaxX"          "15184"
#    Option    "MinY"          "15372"
#    Option    "MaxY"          "1230"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode" "Scaled"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver    "elo2300"
#    Option    "Device"        "/dev/ttyS0"
#    Option    "MinX"          "231"
#    Option    "MaxX"          "3868"
#    Option    "MinY"          "3858"
#    Option    "MaxY"          "272"
#    Option    "ScreenNumber"  "0"
#    Option    "ReportingMode" "Scaled"
#    Option    "ButtonThreshold"      "17"
#    Option    "ButtonNumber"  "1"
#    Option    "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "monitor0"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync  30-85

#    HorizSync        30-64        # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-160

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier        "Standard VGA"
    VendorName        "Unknown"
    BoardName        "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset        "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver    "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam        256

#    Clocks        25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "video3"
    Driver      "vga"
        # unsupported card
    #VideoRam    512
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "video3"
    Monitor    "monitor0"
    DefaultDepth 24

    Subsection "Display"
        Depth      8
        Modes      "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth      16
        Modes      "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth      24
        Modes      "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

Can you find the difference and what's wrong with ATI's file? PLEASE help me!

J.W. 03-19-2006 02:37 PM

I see two major differences. First, the horizontal and vertical frequencies for your monitor are different. In the first example, they are 31.5-50 and 40-90 but in the second example they are 30-85 and 50-160. I don't know what the correct specs should be for your monitor, but obviously, for any given monitor, only one set of frequency rates would apply. Also, the video driver specified in the second example is the generic "vga" while the first example uses "vesa". If you are attempting to use ATI, the driver should be something like "fglrx"

I'm not sure that you have actually installed the ATI drivers (your link is returning a 404). I would recommend using the first xorg.conf, and reinstalling the ATI drivers. Good luck with it


All times are GMT -5. The time now is 11:05 AM.