LinuxQuestions.org
LinuxAnswers - the LQ Linux tutorial section.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Server
User Name
Password
Linux - Server This forum is for the discussion of Linux Software used in a server related context.

Notices

Reply
 
Search this Thread
Old 07-19-2012, 06:20 AM   #1
Jarkko Linnanvirta
LQ Newbie
 
Registered: Jul 2012
Posts: 3

Rep: Reputation: Disabled
vsftpd: Login incorrect


Hi,

I have been searching for an answer to this problem from Google for a few hours, but can't find a solution.

I have vsftpd installed on an Ubuntu Server 10.04. Everything worked just fine for months, until a few days ago I was not able to login to ftp anymore. I have tried to remove and install vsftpd again with no luck. I have tested to use shh with the same username and password. That works, so the password must be correct. I have also created another user just to test if I can get an ftp connection with it. No way.

Thank you for your responses.

Here is /etc/vsftp.conf:
Code:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/private/vsftpd.pem
 
Old 07-19-2012, 06:30 AM   #2
TenTenths
Senior Member
 
Registered: Aug 2011
Location: Dublin
Distribution: Centos 5 / 6
Posts: 1,398

Rep: Reputation: 433Reputation: 433Reputation: 433Reputation: 433Reputation: 433
And what are you seeing in your vsftpd log files and messages log files when the login is attempted?
 
Old 07-19-2012, 06:32 AM   #3
vishesh
Member
 
Registered: Feb 2008
Distribution: Fedora,RHEL,Ubuntu
Posts: 649

Rep: Reputation: 66
Are you able to log on via bash using same username/password ?

Thanks
 
Old 07-19-2012, 06:51 AM   #4
arun5002
Member
 
Registered: Aug 2011
Location: Chennai,India
Distribution: Redhat,Centos,Ubuntu,Dedian
Posts: 549
Blog Entries: 5

Rep: Reputation: Disabled
Hi

These is my vsftpd configuration file works fine in ubuntu 10.04 lucid.Make a backup of your original conf file and paste the conf of below try to start the vsftpd
server .Paste your /var/log/vsftpd.log for more help



# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
#write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in your local time zone. The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default. These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/private/vsftpd.pem
 
Old 07-28-2012, 11:24 AM   #5
Jarkko Linnanvirta
LQ Newbie
 
Registered: Jul 2012
Posts: 3

Original Poster
Rep: Reputation: Disabled
Thank you for your replies and sorry for that it took me a while to reply back. I'm not working with the ftp server daily, and have also other things to do.

Here is the related log records from /var/log/vsftpd.log, although there is not much to see:
Code:
Sat Jul 28 19:04:29 2012 [pid 2] CONNECT: Client "FTP SERVER IP ADDRESS"
Sat Jul 28 19:04:40 2012 [pid 1] [USERNAME] FAIL LOGIN: Client "FTP SERVER IP ADDRESS"
Is there any other log files I should check? Or any other way to make the log to be more verbose? The client IP address is the same as the server's because I tried to connect from the server's command line to the same machine.

I was not able to log in via bash.

arun5002, thank you for your config file, but the same error happened also with that configuration.
 
Old 07-28-2012, 11:33 AM   #6
btmiller
Senior Member
 
Registered: May 2004
Location: In the DC 'burbs
Distribution: Arch, Scientific Linux, Debian, Ubuntu
Posts: 4,059

Rep: Reputation: 295Reputation: 295Reputation: 295
Does the user account exist in the local password file, or is it fetched from another source, e.g. LDAP? You might also log in /var/log/auth.log and see if there are any clues.
 
Old 07-28-2012, 01:10 PM   #7
lithos
Senior Member
 
Registered: Jan 2010
Location: SI : 45.9531, 15.4894
Distribution: CentOS, OpenNA/Trustix, testing desktop openSuse 12.1 /Cinnamon/KDE4.8
Posts: 1,144

Rep: Reputation: 217Reputation: 217Reputation: 217
please post your

"etc/pam.d/vsftpd" configuration file,

maybe there's something that doesn't let you pass through "auth" mechanism.
 
Old 08-01-2012, 07:52 AM   #8
Jarkko Linnanvirta
LQ Newbie
 
Registered: Jul 2012
Posts: 3

Original Poster
Rep: Reputation: Disabled
Thank you, btmiller and lithos! I looked at the auth.log and saw that PAM was not working correctly. This was because some time ago I did some SMTP authentication testing using PAM and I forgot that also vsftpd uses PAM. I screwed up the PAM configuration and forgot the whole thing until I recalled it when reading the auth.log file. So it was my bad. Now I have fixed PAM config and everything works just fine.

The users are in the local password file, so no LDAP or anything like that is in use. Next time if something bad happens with FTP server, I will remember to look at PAM.

Thank you all for your help! This forum is really great!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
vsftpd 530 login incorrect pocon Slackware 7 03-08-2012 07:30 AM
vsftpd : 530 login incorrect sheelavantar Slackware 7 09-14-2010 04:07 AM
Login Incorrect - vsftpd/htpasswd lpe Linux - Software 1 06-19-2008 11:51 AM
Vsftpd login incorrect nitro_punk85 Linux - Server 2 08-05-2007 07:18 AM
vsftpd 1.1.2 on redhat 7.1 -- 530 incorrect login issue triggerfish Linux - Software 4 08-17-2003 07:58 PM


All times are GMT -5. The time now is 12:50 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration