LinuxQuestions.org - vsftpd 500 OOPS: cannot change directory

hi

i create ftp server on suse enterprise and i've join my domain, but i've a problem with vsftpd when i try to connect with filezila

i've this message 500 OOPS: cannot change directory:/home/cola/toto

i want to connect at server ftp with my logs windows AD not user local

i've tests so much soluce for this error but change nothing.

for exemple : command setenforce 0 or getenforce or setbool etc.. command-not-found setenforce

and i can authenticate me only with port 22 on FileZila

SUSE Linux Enterprise Server 11 SP2 (x86_64)
vsftpd: version 2.0.7
my config :

# General Settings
#
# Uncomment this to enable any form of FTP write command.
#
write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
#
#dirmessage_enable=YES
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#
#nopriv_user=ftpsecure
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#
#ls_recurse_enable=YES
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#
#deny_email_enable=YES
#
# (default follows)
#
#banned_email_file=/etc/vsftpd.banned_emails
#
# If enabled, all user and group information in
# directory listings will be displayed as "ftp".
#
hide_ids=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
local_umask=022
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#
chroot_list_enable=NO
#
# (default follows)
#
#chroot_list_file=/etc/vsftpd.chroot_list
#
# The maximum data transfer rate permitted, in bytes per second, for
# local authenticated users. The default is 0 (unlimited).
#
local_max_rate=7168
#
# Anonymous users will only be allowed to download files which are
# world readable.
#
#anon_world_readable_only=YES
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#
anon_upload_enable=NO
#
# Default umask for anonymus users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
#anon_umask=022
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#
anon_mkdir_write_enable=NO
#
# Uncomment this to enable anonymus FTP users to perform other write operations
# like deletion and renaming.
#
#anon_other_write_enable=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#
#chown_uploads=YES
#chown_username=whoever
#
# The maximum data transfer rate permitted, in bytes per second, for anonymous
# authenticated users. The default is 0 (unlimited).
#
#anon_max_rate=7168

# Log Settings
#
# Log to the syslog daemon instead of using an logfile.
#
#syslog_enable=YES
#
# Activate logging of uploads/downloads.
#
xferlog_enable=YES
#
# You may override where the log file goes if you like. The default is shown
# below.
#
#vsftpd_log_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note: This disables the normal logging unless you enable dual_log_enable below.
#
#xferlog_std_format=NO
#
# You may override where the log file goes if you like. The default is shown
# below.
#
xferlog_file=/var/log/xferlog
#
# Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log.
#
#dual_log_enable=YES
#
# Uncomment this to enable session status information in the system process listing.
#
#setproctitle_enable=YES

# Transfer Settings
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
#
connect_from_port_20=YES
#
# You may change the default value for timing out a data connection.
#
data_connection_timeout=120
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#
async_abor_enable=NO
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#
ascii_upload_enable=NO
ascii_download_enable=NO

# PAM setting. Do NOT change this unless you know what you do!
#
pam_service_name=vsftpd

# Set listen=YES if you want vsftpd to run standalone
#
listen=YES

# Set to ssl_enable=YES if you want to enable SSL
ssl_enable=NO

# Limit passive ports to this range to assis firewalling
pasv_min_port=30000
pasv_max_port=30100
anon_mkdir_write_enable=NO
anon_root=/home
anon_upload_enable=NO
chroot_local_user=YES
ftpd_banner=Welcome message
idle_session_timeout=900
local_enable=YES
log_ftp_protocol=YES
max_clients=15
max_per_ip=3
pasv_enable=YES
ssl_sslv2=NO
ssl_sslv3=NO
ssl_tlsv1=NO
write_enable=YES
local_root=/home/cola
anonymous_enable=NO

On windows

C:\Users\toto>ftp 10.xx.xx.xx
Connecté à 10.xx.xx.xx.
220 Welcome message
Utilisateur (10.xx.xx.xx:(none)) : cola\toto
331 Please specify the password.
Mot de passe :
500 OOPS: cannot change directory:/home/cola/toto
500 OOPS: child died
Connexion fermée par l'hôte distant.

tell me if my config its ok or not any criticism is good

help me pls ^^