LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Server
User Name
Password
Linux - Server This forum is for the discussion of Linux Software used in a server related context.

Notices



Reply
 
Search this Thread
Old 07-03-2008, 04:45 AM   #1
MACscr
LQ Newbie
 
Registered: Mar 2004
Posts: 5

Rep: Reputation: 0
Using Conga wiht Centos 5.2 to create cluster


I have 3 servers running centos 5.2 and running kernel 2.6.18-92.1.6.el5 x86_64. One of the servers i am only using for monitoring and managing the cluster (with conga/luci). I have a private lan setup on eth1 just for managing the cluster and for connecting to the iscsi SAN. The apf firewall is setup to trust all traffic on eth1.

Anyway, i get the following error after creating the cluster with the two nodes. This error shows in the /var/log/messages file on each server.

Jul 3 03:35:51 skydive openais[5628]: [MAIN ] Using default multicast address of 239.192.113.184
Jul 3 03:35:51 skydive openais[5628]: [MAIN ] Error reading config from CCS
Jul 3 03:35:51 skydive openais[5628]: [MAIN ] AIS Executive exiting (reason: could not read the main configuration file).
Jul 3 03:36:16 skydive ccsd[5595]: Unable to connect to cluster infrastructure after 30 seconds.


Ive tried googling for answers or people having the same type of issue, but I have came up empty. Is it trying to read cluster.conf? If so, is it the one on the luci server or on itself? Note: the skydive server is one of the cluster nodes, not the server that is running Luci.

Any ideas?

Last edited by MACscr; 07-03-2008 at 05:08 AM.
 
Old 07-04-2008, 11:52 PM   #2
MACscr
LQ Newbie
 
Registered: Mar 2004
Posts: 5

Original Poster
Rep: Reputation: 0
Looks like everyone else is either to busy or just as long as i am. I am hoping to get some ideas to resolve this without having to hire a consultant. =/
 
Old 10-07-2008, 04:27 AM   #3
ross_cav
LQ Newbie
 
Registered: Aug 2005
Location: Tokyo
Distribution: Fedora Core 5
Posts: 6

Rep: Reputation: 0
check your /etc/hosts file, make sure that 127.0.0.1 does not use the same name as your node.

If you try to start cman, this is probably the error you will get.

cman not started: Local host name resolves to 127.0.0.1; fix /etc/hosts before starting cluster. /usr/sbin/cman_tool: aisexec daemon didn't start

just change it to localhost

eg.

127.0.0.1 localhost.localdomain localhost
 
  


Reply

Tags
centos, cluster


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tomcat 5.5 high processor load in Centos 5.1 cluster tijn_sol Linux - Server 0 02-07-2008 10:24 AM
Conga??? gslima Red Hat 1 01-16-2008 10:35 AM
conga on RHEL-5 sachin1361 Linux - Enterprise 3 09-10-2007 03:23 AM
How do i create an a/c at all nodes in the cluster dogma Linux - Networking 4 05-19-2003 11:21 AM
how do I create a cluster iquadri1 Linux - Networking 4 04-03-2002 02:40 PM


All times are GMT -5. The time now is 12:15 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration