LinuxQuestions.org - [SOLVED] Two websites displaying the same content - Apache2

Alright so here I am again with another apache2 configuration question, Trust me i'll learn this sometime ;) . So I have 2 websites, one is an actual registered website the other is not but may soon be. When I go to the Registered one it shows up with the one that is not registered but however when I go to the non registered one it displays as it should. I had this same problem at one point but here it is again, the solution I had last time is no longer working ;( . I have the directories set to go to there seperate websites and my apache configuration is below....I use to not even be able to acces my unregistered one locally because there was a forbidden 403 error but It stated to work when I added BOTH websites into my hosts file....but now they both show same content ;(

Apache.conf
Code:
# This is the main Apache server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See http://httpd.apache.org/docs/2.2/ for detailed information about

# the directives and /usr/share/doc/apache2-common/README.Debian.gz about

# Debian specific hints.

#

#

# Summary of how the Apache 2 configuration works in Debian:

# The Apache 2 web server configuration in Debian is quite different to

# upstream's suggested way to configure the web server. This is because Debian's

# default Apache2 installation attempts to make adding and removing modules,

# virtual hosts, and extra configuration directives as flexible as possible, in

# order to make automating the changes and administering the server as easy as

# possible.



# It is split into several files forming the configuration hierarchy outlined

# below, all located in the /etc/apache2/ directory:

#

#        /etc/apache2/

#        |-- apache2.conf

#        |        `--  ports.conf

#        |-- mods-enabled

#        |        |-- *.load

#        |        `-- *.conf

#        |-- conf.d

#        |        `-- *

#        `-- sites-enabled

#                `-- *

#

#

# * apache2.conf is the main configuration file (this file). It puts the pieces

#  together by including all remaining configuration files when starting up the

#  web server.

#

#  In order to avoid conflicts with backup files, the Include directive is

#  adapted to ignore files that:

#  - do not begin with a letter or number

#  - contain a character that is neither letter nor number nor _-.

#  - contain .dpkg

#

# * ports.conf is always included from the main configuration file. It is

#  supposed to determine listening ports for incoming connections, and which

#  of these ports are used for name based virtual hosts.

#

# * Configuration files in the mods-enabled/ and sites-enabled/ directories

#  contain particular configuration snippets which manage modules or virtual

#  host configurations, respectively.

#

#  They are activated by symlinking available configuration files from their

#  respective *-available/ counterparts. These should be managed by using our

#  helpers a2enmod/a2dismod, a2ensite/a2dissite. See

#  their respective man pages for detailed information.

#

# * Configuration files in the conf.d directory are either provided by other

#  packages or may be added by the local administrator. Local additions

#  should start with local- or end with .local or .local.conf to avoid name

#  clashes. All files in conf.d are included 

#

# * The binary is called apache2. Due to the use of environment variables, in

#  the default configuration, apache2 needs to be started/stopped with

#  /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not

#  work with the default configuration.





# Global configuration

#



#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE!  If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the LockFile documentation (available

# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);

# you will save yourself a lot of trouble.

#

# Do NOT add a slash at the end of the directory path.

#

#ServerRoot "/etc/apache2"



#

# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.

#

LockFile ${APACHE_LOCK_DIR}/accept.lock



#

# PidFile: The file in which the server should record its process

# identification number when it starts.

# This needs to be set in /etc/apache2/envvars

#

PidFile ${APACHE_PID_FILE}



#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300



#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On



#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100



#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 5



##

## Server-Pool Size Regulation (MPM specific)

## 



# prefork MPM

# StartServers: number of server processes to start

# MinSpareServers: minimum number of server processes which are kept spare

# MaxSpareServers: maximum number of server processes which are kept spare

# MaxClients: maximum number of server processes allowed to start

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule mpm_prefork_module>

    StartServers          5

    MinSpareServers      5

    MaxSpareServers      10

    MaxClients          150

    MaxRequestsPerChild  0

</IfModule>



# worker MPM

# StartServers: initial number of server processes to start

# MinSpareThreads: minimum number of worker threads which are kept spare

# MaxSpareThreads: maximum number of worker threads which are kept spare

# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a

#              graceful restart. ThreadLimit can only be changed by stopping

#              and starting Apache.

# ThreadsPerChild: constant number of worker threads in each server process

# MaxClients: maximum number of simultaneous client connections

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule mpm_worker_module>

    StartServers          2

    MinSpareThreads      25

    MaxSpareThreads      75 

    ThreadLimit          64

    ThreadsPerChild      25

    MaxClients          150

    MaxRequestsPerChild  0

</IfModule>



# event MPM

# StartServers: initial number of server processes to start

# MinSpareThreads: minimum number of worker threads which are kept spare

# MaxSpareThreads: maximum number of worker threads which are kept spare

# ThreadsPerChild: constant number of worker threads in each server process

# MaxClients: maximum number of simultaneous client connections

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule mpm_event_module>

    StartServers          2

    MinSpareThreads      25

    MaxSpareThreads      75 

    ThreadLimit          64

    ThreadsPerChild      25

    MaxClients          150

    MaxRequestsPerChild  0

</IfModule>



# These need to be set in /etc/apache2/envvars

User ${APACHE_RUN_USER}

Group ${APACHE_RUN_GROUP}



#

# AccessFileName: The name of the file to look for in each directory

# for additional configuration directives.  See also the AllowOverride

# directive.

#



AccessFileName .htaccess



#

# The following lines prevent .htaccess and .htpasswd files from being 

# viewed by Web clients. 

#

<Files ~ "^\.ht">

    Order allow,deny

    Deny from all

    Satisfy all

</Files>



#

# DefaultType is the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

# It is also possible to omit any default MIME type and let the

# client's browser guess an appropriate action instead. Typically the

# browser will decide based on the file's extension then. In cases

# where no good assumption can be made, letting the default MIME type

# unset is suggested  instead of forcing the browser to accept

# incorrect  metadata.

#

DefaultType None





#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off



# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog ${APACHE_LOG_DIR}/error.log



#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn



# Include module configuration:

Include mods-enabled/*.load

Include mods-enabled/*.conf



# Include list of ports to listen on and which to use for name based vhosts

Include ports.conf



#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i

#

LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined

LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %O" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent



# Include of directories ignores editors' and dpkg's backup files,

# see the comments above for details.



# Include generic snippets of statements

Include conf.d/



# Include the virtual host configurations:

Include sites-enabled/

Include /etc/phpmyadmin/apache.conf