Hi i have Intel Network card but after install new unifi and upgrade system . Network card stop working . I change cables not help make new driver from intel not help , any idea ? what hapend why RX now is 0
System: 3.2.0-4-amd64 #1 SMP
Debian 3.2.63-2+deb7u1 x86_64 GNU/Linux
card:
04:00.0 Ethernet controller:
Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Code:
netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
...
eth4 1518 0 0 0 0 0 563 0 0 0 BMRU
eth4.10 1518 0 0 0 0 0 141 0 0 0 BMRU
eth4.100 1518 0 0 0 0 0 142 0 0 0 BMRU
eth4.200 1518 0 0 0 0 0 142 0 0 0 BMRU
...
Code:
ethtool eth4
Settings for eth4:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
Code:
eth4 Link encap:Ethernet HWaddr
inet addr:172.29.98.1 Bcast:172.29.98.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:feaf:3ff1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1518 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:563 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:80715 (78.8 KiB)
Interrupt:17 Memory:fbde0000-fbe00000
eth4.10 Link encap:Ethernet HWaddr
inet addr:172.31.2.1 Bcast:172.31.2.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:feaf:3ff1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1518 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:141 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:19215 (18.7 KiB)
eth4.100 Link encap:Ethernet HWaddr
inet addr:172.30.100.1 Bcast:172.30.100.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:feaf:3ff1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1518 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:142 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:19288 (18.8 KiB)
eth4.200 Link encap:Ethernet HWaddr 00:1b:21:af:3f:f1
inet addr:172.30.200.1 Bcast:172.30.200.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:feaf:3ff1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1518 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:142 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:19262 (18.8 KiB)
modinfo for driver
http://paste.debian.net/133951/
port static on second way cable in swich
http://pastebin.com/cdpQebvJ