LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Server
User Name
Password
Linux - Server This forum is for the discussion of Linux Software used in a server related context.

Notices

Reply
 
Search this Thread
Old 03-01-2011, 08:25 AM   #1
linuxrndblog
Member
 
Registered: Oct 2010
Location: India
Posts: 89

Rep: Reputation: 2
Question kernel panic not syncing : Fatal exception


Hi ,

We are getting "kernel panic not syncing : Fatal exception" error.

Please find the /var/log/messages out put.


[root@STYLUSINCN1 ~]# cat /var/log/messages | grep err
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: Using IOAPIC for interrupt routing
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: assign_interrupt_mode Found MSI capability
Mar 2 23:35:06 STYLUSINCN1 kernel: assign_interrupt_mode Found MSI capability
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 18
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 23 (level, low) -> IRQ 19
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16

Hardware Details:
CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
Motherboard: PBSBA

Software Details:
Operating System : Fedora-8 (32-Bit)
Kernel: Linux STYLUSINCN1 2.6.23.1-42.fc8 #1 SMP Tue Oct 30 13:55:12 EDT 2007 i686 i686 i386 GNU/Linux

[root@STYLUSINCN1 ~]# lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
09:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
0a:04.0 Mass storage controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (rev 13)

[root@STYLUSINCN1 ~]# fdisk -l

Disk /dev/sda: 251.0 GB, 251059544064 bytes
255 heads, 63 sectors/track, 30522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0001dcb9

Device Boot Start End Blocks Id System
/dev/sda1 * 1 29479 236790036 fd Linux raid autodetect
/dev/sda2 29480 30001 4192965 fd Linux raid autodetect
/dev/sda3 30002 30522 4184932+ fd Linux raid autodetect

Disk /dev/sdb: 251.0 GB, 251059544064 bytes
255 heads, 63 sectors/track, 30522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000b89e4

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 29479 236790036 fd Linux raid autodetect
/dev/sdb2 29480 30001 4192965 fd Linux raid autodetect
/dev/sdb3 30002 30522 4184932+ fd Linux raid autodetect

Disk /dev/md0: 242.4 GB, 242472910848 bytes
2 heads, 4 sectors/track, 59197488 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table

Disk /dev/md1: 4293 MB, 4293525504 bytes
2 heads, 4 sectors/track, 1048224 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x30307800

Disk /dev/md1 doesn't contain a valid partition table

Disk /dev/md2: 4285 MB, 4285267968 bytes
2 heads, 4 sectors/track, 1046208 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x30307800

Disk /dev/md2 doesn't contain a valid partition table
 
Old 03-01-2011, 09:33 AM   #2
hua
Member
 
Registered: Oct 2006
Location: Slovak Republic
Distribution: Slackware 13.37, 14.0
Posts: 396

Rep: Reputation: 49
I suppose you tried to find the kernel panic error in /var/log/messages with this:
Quote:
[root@STYLUSINCN1 ~]# cat /var/log/messages | grep err
And you didn't find it. This is what you mean with: "Please find..."?

Where do you see this kernel panic message? It can be also useful if you tell us about the process how did you get this message.
Is this new installation and you cannot boot after setup? Or it was running some time and it started show this error?
 
Old 03-02-2011, 02:35 AM   #3
linuxrndblog
Member
 
Registered: Oct 2010
Location: India
Posts: 89

Original Poster
Rep: Reputation: 2
Hi Hua,

I have checked the kernel boot error messages from /var/log/messages/ by using cat /var/log/messages | grep err command.

Error kernel panic – not syncing : Fatal exception is displayed on Server's Login Screen then after some time this server got hanged automatically. So we require reboot and after restarting this server, it is working fine. After some hours same things happened again and again.
 
Old 03-02-2011, 03:05 AM   #4
hua
Member
 
Registered: Oct 2006
Location: Slovak Republic
Distribution: Slackware 13.37, 14.0
Posts: 396

Rep: Reputation: 49
Usually there are some useful information on the screen when the kernel panic error appears. At the moment when this error happens the system has already gone and probably won't log anything into logs. When I have problems with kernel panic I found useful information on the screen several lines before the actual error. It was a hard drive partition failure.
Try to get some more information from the screen when the kernel panic appears.

There are any useful information in logs you posted. Try dig in more into the logs. Especially syslog. I would try also dmesg. Look for any failure, warning, error. (I would guess media failure - hdd)
Grep is useful but only if you know what are you looking for. If you don't it gives results like this:
Quote:
Mar 2 23:35:06 STYLUSINCN1 kernel: ACPI: Using IOAPIC for interrupt routing


Quote:
Disk /dev/md0: 242.4 GB, 242472910848 bytes
2 heads, 4 sectors/track, 59197488 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table
(NOTE: This is not a failure - I get this log too on my raid arrays)

Last edited by hua; 03-02-2011 at 03:07 AM.
 
Old 03-04-2011, 03:18 AM   #5
linuxrndblog
Member
 
Registered: Oct 2010
Location: India
Posts: 89

Original Poster
Rep: Reputation: 2
Hi Hua,

Please find the dmesg log. I have kernel panic error file but it is not txt format. It is in .JEG format. So how I can attach this file in this thread, Please let me know. There is no issue in hard disk or RAID-1.

dmesg log:

Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf670000 (usable)
BIOS-e820: 00000000bf670000 - 00000000bf687000 (ACPI data)
BIOS-e820: 00000000bf687000 - 00000000bf700000 (ACPI NVS)
BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7130
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F7100, 0014 (r0 PTLTD )
ACPI: RSDT BF67F955, 003C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP BF686E7E, 0084 (r1 SUPRMC 6040000 PTL 3)
ACPI: DSDT BF680D7D, 6101 (r1 INTEL BR_WATER 6040000 MSFT 2000001)
ACPI: FACS BF687FC0, 0040
ACPI: TCPA BF686F02, 0032 (r1 SMC 6040000 PTL 0)
ACPI: MCFG BF686F34, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: APIC BF686F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT BF686FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT BF67F991, 13EC (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 1040384
Kernel command line: ro root=/dev/md0 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2128.779 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3093368k/4194304k available (2183k kernel code, 41284k reserved, 1117k data, 280k init, 2218432k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc073f000 - 0xc0785000 ( 280 kB)
.data : 0xc0621f7d - 0xc0739544 (1117 kB)
.text : 0xc0400000 - 0xc0621f7d (2183 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 4259.18 BogoMIPS (lpj=2129591)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07a9000 soft=c0789000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4256.66 BogoMIPS (lpj=2128333)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
Total of 2 processors activated (8515.84 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 10:37:05 Date: 03/05/11
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS BUG #81[00000000] found
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 4000-4fff
MEM window: d0100000-d01fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: disabled.
PREFETCH window: d0200000-d02fffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3152k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1299321425.532:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 230FF4508E76ABC1
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0cie00]
Allocate Port Service[0000:00:1c.0cie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5cie00]
Allocate Port Service[0000:00:1c.5cie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 965G Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 3:994:627
Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 849k
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0404000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd0404400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003020
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
usb 2-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003080
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7804.000 MB/sec
xor: using function: pIII_sse (7804.000 MB/sec)
async_tx: api initialized (async)
raid6: int32x1 792 MB/s
raid6: int32x2 839 MB/s
raid6: int32x4 800 MB/s
raid6: int32x8 710 MB/s
raid6: mmxx1 2765 MB/s
raid6: mmxx2 3019 MB/s
raid6: sse1x1 1863 MB/s
raid6: sse1x2 2507 MB/s
raid6: sse2x1 3464 MB/s
raid6: sse2x2 4472 MB/s
raid6: using algorithm sse2x2 (4472 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130d0 irq 14
ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130d8 irq 15
ata1.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata1.00: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
usb 6-1: new full speed USB device using uhci_hcd and address 2
ata2.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata2.00: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 490350672 512-byte hardware sectors (251060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 490350672 512-byte hardware sectors (251060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 490350672 512-byte hardware sectors (251060 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 490350672 512-byte hardware sectors (251060 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
usb 6-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x00013430 ctl 0x00013426 bmdma 0x000130f0 irq 18
ata4: SATA max UDMA/133 cmd 0x00013428 ctl 0x00013422 bmdma 0x000130f8 irq 18
pata_it821x: controller in pass through mode.
ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:0a:04.0 to 64
scsi4 : pata_it821x
scsi5 : pata_it821x
ata5: PATA max UDMA/133 cmd 0x00015020 ctl 0x00015016 bmdma 0x00015000 irq 19
ata6: PATA max UDMA/133 cmd 0x00015018 ctl 0x00015012 bmdma 0x00015008 irq 19
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 0
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: md0: raid array is not clean -- starting background reconstruction
raid1: raid set md0 active with 2 out of 2 mirrors
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 236789952 blocks.
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: md0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 41320551
ext3_orphan_cleanup: deleting unreferenced inode 9502758
ext3_orphan_cleanup: deleting unreferenced inode 9502757
ext3_orphan_cleanup: deleting unreferenced inode 9502756
ext3_orphan_cleanup: deleting unreferenced inode 9502755
ext3_orphan_cleanup: deleting unreferenced inode 9502753
EXT3-fs: md0: 6 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1299321450.500:2): selinux=0 auid=4294967295
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 6:0:0:0: Attached scsi generic sg2 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:09:00.0 to 64
FDC 0 is a post-1991 82077
e1000: 0000:09:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:8a:82:00
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
pegasus 6-1:1.0: setup Pegasus II specific registers
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
pegasus 6-1:1.0: eth1, ADMtek ADM8511 "Pegasus II" USB Ethernet, 00:18:e7:08:60:55
usbcore: registered new interface driver pegasus
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
md: md2 stopped.
md: bind<sdb3>
md: bind<sda3>
raid1: raid set md2 active with 2 out of 2 mirrors
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on md0, internal journal
Adding 4192888k swap on /dev/md1. Priority:-1 extents:1 across:4192888k
Adding 4184824k swap on /dev/md2. Priority:-2 extents:1 across:4184824k


Hard disk and RAID-1 S status:

[root@STYLUSINCN1 ~]# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4]
md2 : active raid1 sda3[0] sdb3[1]
4184832 blocks [2/2] [UU]

md1 : active raid1 sda2[0] sdb2[1]
4192896 blocks [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]
236789952 blocks [2/2] [UU]

unused devices: <none>

[root@STYLUSINCN1 ~]# fdisk -l

Disk /dev/sda: 251.0 GB, 251059544064 bytes
255 heads, 63 sectors/track, 30522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0001dcb9

Device Boot Start End Blocks Id System
/dev/sda1 * 1 29479 236790036 fd Linux raid autodetect
/dev/sda2 29480 30001 4192965 fd Linux raid autodetect
/dev/sda3 30002 30522 4184932+ fd Linux raid autodetect

Disk /dev/sdb: 251.0 GB, 251059544064 bytes
255 heads, 63 sectors/track, 30522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000b89e4

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 29479 236790036 fd Linux raid autodetect
/dev/sdb2 29480 30001 4192965 fd Linux raid autodetect
/dev/sdb3 30002 30522 4184932+ fd Linux raid autodetect

Disk /dev/md0: 242.4 GB, 242472910848 bytes
2 heads, 4 sectors/track, 59197488 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table

Disk /dev/md1: 4293 MB, 4293525504 bytes
2 heads, 4 sectors/track, 1048224 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x30307800

Disk /dev/md1 doesn't contain a valid partition table

Disk /dev/md2: 4285 MB, 4285267968 bytes
2 heads, 4 sectors/track, 1046208 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x30307800

Disk /dev/md2 doesn't contain a valid partition table

Thanks in advance for your support.
 
Old 03-04-2011, 04:18 AM   #6
linuxrndblog
Member
 
Registered: Oct 2010
Location: India
Posts: 89

Original Poster
Rep: Reputation: 2
Hi Hua,

I have attached kernel error this mail. Kindly check the error and suggest the solutions.

Thanks in advance for your support.
Attached Images
File Type: jpg kernel_panic.JPG (84.7 KB, 27 views)
 
Old 03-04-2011, 11:49 AM   #7
hua
Member
 
Registered: Oct 2006
Location: Slovak Republic
Distribution: Slackware 13.37, 14.0
Posts: 396

Rep: Reputation: 49
It looks like a BIOS bug.
Quote:
PCI: BIOS BUG #81[00000000] found
This logs are useful:
Quote:
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Error (psargs-0355): [\_SB_.PCI0.Z00B] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node f7ccf738), AE_NOT_FOUND
ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node f7ccf7e0), AE_NOT_FOUND
ACPI: PCI Root Bridge [PCI0] (0000:00)
Here is some link with the same kind of issue.
https://bugzilla.redhat.com/show_bug.cgi?id=491588

It will probably need BIOS update. I had never done this on alive server so I can just tell you what would I do:

This questions are important.

1. Is this a production server? - If yes, you should backup everything and be prepared for the case it won't boot after BIOS update.
2. You should find the exact model number of your motherboard and check if there is a new BIOS for your motherboard. You can also get information about the issues which was corrected by the new BIOS.
3. Find a method to update your BIOS.

Since I doesn't have that much experience with this, I can only recommend you to continue asking about the dmesg output with the BIOS bug.
Maybe it would be useful to consider starting new thread with BIOS bug and BIOS update name.

BUT PLEASE WAIT TILL ONE OF THE MODERATORS (ADMIN) CONFIRMS THAT IT IS A GOOD IDEA. I don't want to get you in the "double post" issue.
(It is also possible that I am wrong - please continue searching for information)

Last edited by hua; 03-04-2011 at 12:00 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
kernel Panic -Not syncing Fatal exception meenakshi Singh Linux - Kernel 1 11-23-2010 12:15 AM
kernel panic - not syncing : fatal exception bluesharks Linux - Software 2 08-18-2010 02:38 PM
Help!!! <0> kernel panic not syncing : Fatal exception vab05391 Linux - Kernel 3 03-10-2009 06:53 AM
kernel panic-not syncing:fatal exception geovjoy Linux - Newbie 1 04-09-2008 05:13 AM
kernel panic - not syncing : fatal exception upon boot up mystavros Linux - Enterprise 2 10-24-2007 06:04 AM


All times are GMT -5. The time now is 05:53 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration