CentOS 5.5 RAID 1
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.
I get a partion schema error.
Can I do this?
The server is a HP Proliant ML150 G3 server with two 80GB HDD.
I take it you're not using a hardware-RAID controller? If so, simply setup the array in the controller's firmware config < interrupt at boot >
If you're wanting to do softRaid you need to use the command "mdadm" in order to setup your array.
|All times are GMT -5. The time now is 03:37 PM.|