I know that you must be sick of bluetooth questions by now, but I've read a ton of stuff and nothing helps. My problem is the passkey. I simply can't connect to a bluetooth device! I will post the full procedure I follow so you can correct me if I am wrong, and also for others with the same problem to reference to.
Here we go.
Code:
newholborn@darkstar:~$ hciconfig
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
Nice.
Code:
newholborn@darkstar:~$ sudo hciconfig hci0 up
newholborn@darkstar:~$ hciconfig
hci0: Type: USB
BD Address: 00:02:72:C1:19:E3 ACL MTU: 377:10 SCO MTU: 64:8
UP RUNNING
RX bytes:85 acl:0 sco:0 events:9 errors:0
TX bytes:33 acl:0 sco:0 commands:9 errors:0
All is well up to now. Let's try to find my cellphone.
Code:
newholborn@darkstar:~$ hcitool scan
Scanning ...
00:0E:6D:95:45:67 Proud like a god
newholborn@darkstar:~$ sudo l2ping 00:0E:6D:95:45:67
Ping: 00:0E:6D:95:45:67 from 00:02:72:C1:19:E3 (data size 44) ...
0 bytes from 00:0E:6D:95:45:67 id 0 time 95.92ms
0 bytes from 00:0E:6D:95:45:67 id 1 time 17.92ms
0 bytes from 00:0E:6D:95:45:67 id 2 time 12.96ms
0 bytes from 00:0E:6D:95:45:67 id 3 time 16.95ms
0 bytes from 00:0E:6D:95:45:67 id 4 time 16.96ms
5 sent, 5 received, 0% loss
Here's my old trusty Nokia 6600!
As you can see I can ping it.
Code:
newholborn@darkstar:~$ sdptool browse 00:0E:6D:95:45:67
Browsing 00:0E:6D:95:45:67 ...
Service Name: Fax
Service RecHandle: 0x10000
Service Class ID List:
"Fax" (0x1111)
"Generic Telephony" (0x1204)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Fax" (0x1111)
Version: 0x0100
Service Name: Dial-up Networking
Service RecHandle: 0x10001
Service Class ID List:
"Dialup Networking" (0x1103)
"Generic Networking" (0x1201)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100
Service Name: Bluetooth Serial Port
Service Description: Bluetooth Serial Port
Service Provider: Symbian Ltd.
Service RecHandle: 0x10002
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 2
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Service Name: OBEX Object Push
Service RecHandle: 0x10003
Service Class ID List:
"OBEX Object Push" (0x1105)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 9
"OBEX" (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"OBEX Object Push" (0x1105)
Version: 0x0100
Service Name: OBEX File Transfer
Service RecHandle: 0x10004
Service Class ID List:
"OBEX File Transfer" (0x1106)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 10
"OBEX" (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"OBEX File Transfer" (0x1106)
Version: 0x0100
Service Name: Handsfree Audio Gateway
Service RecHandle: 0x10005
Service Class ID List:
"Handfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 3
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0101
newholborn@darkstar:~$ sudo mkdir -p /dev/bluetooth/rfcomm
newholborn@darkstar:~$ sudo mknod -m 666 /dev/bluetooth/rfcomm/0 c 216 0
newholborn@darkstar:~$
Here's the channels for each service. I also took the liberty of creating the directory and device node I need
Now lets try to bluesnarf.
Code:
newholborn@darkstar:~$ sudo bluesnarfer -b 00:0E:6D:95:45:67 -C 2 -r 1-100
device name: Proud like a god
bluesnarfer: tcgetattr failed, Input/output error
bluesnarfer: bt_rfcomm_config failed
bluesnarfer: unable to create rfcomm connection
bluesnarfer: release rfcomm ok
newholborn@darkstar:~$
After it finds the device name, my phone asks me for the passkey. I enter "1234" but still, bluesnarfer gives me the error messages.
Here's my hcid.conf and /etc/bluetooth/passkeys/default files:
Code:
newholborn@darkstar:~$ sudo cat /etc/bluetooth/hcid.conf
#
# HCI daemon configuration file.
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security user;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# Default PIN code for incoming connections
passkey "1234";
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ (%d)";
# Local device class
class 0x3e0100;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}
newholborn@darkstar:~$sudo cat /etc/bluetooth/passkeys/default
1234newholborn@darkstar:~$
Why doesn't it work? Maybe something's wrong with the hcid.conf file?
Looking forward to your replies
And, yes, I LOVE SLACKWARE!
Yet another bluetooth problem
