here is my xorg.conf


# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell D1226H"
DisplaySize 340 250
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 4 MX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection










here is a part i havent seen before, but it is in other peoples xorg.conf (read : a few)

Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Disabled
SBA: Enabled

Host Bridge: PCI device 8086:2570
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f004a1b:0x00000b02

Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0xff000e1b:0x1f004302

should i add this in, or not (AGP 8x GF4MX400)(Newest driver)

will this help my 3D performance in Cedega?

that is not from xorg.conf, it is the sort of thing you'll get by running "cat /proc/driver/nvidia/agp/card. it's just information about the hardware, not settings per se.

Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f000e1b:0x1f000302

if this is what i got from running it , are my settings correct, or am i missing something.

they are not settings, they are hardware capabilities.

k, sorry i just woke up .... if I am getting this, and my drivers are configured correctly, and I am having trouble with the 3D acceleration test in Cedega (Fails every time), is Cedega screwy, or is my xorg (at top) incorrect for an Nvidia card?