LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 04-01-2015, 11:27 PM   #16
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,933

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520

samba really has nothing to do with the wireless connection.
systemctl stop samba

Wireless worked prior to installing a new router? Were any other changes made to your laptop? I might try lowering the wireless speed to see if that makes a difference.
 
Old 04-02-2015, 12:18 AM   #17
Decimatrix
LQ Newbie
 
Registered: Mar 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
Wireless worked fine before the switch, though it did this thing where only my laptop could access it after a while, every other device in the house couldn't use it. Basically the opposite of my current situation. Also, would I be able to safely remove samba from my system, as far as I know I've never used it until now

Last edited by Decimatrix; 04-02-2015 at 12:19 AM.
 
Old 04-02-2015, 01:16 AM   #18
ardvark71
LQ Veteran
 
Registered: Feb 2015
Location: Oregon, USA
Distribution: Lubuntu 14.04, Windows Vista
Posts: 5,164
Blog Entries: 3

Rep: Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691
Hi...

Some additional things to try that I found here...

1. "...change the wep encryption to just wpa2 (CCMP)(AES) not (TKIP) if you have that option..."

2. "...set your wireless channel in the router to 1 or 11 then save the router configuration and reboot it."

3. "...go into network manager at top right corner of the screen and click on edit connections>wireless tab and set IPV6 to ignore."

DON'T do any of the others! Does this help?

Also, could you open a terminal and post (copy and paste) the output of this command...

Code:
dmesg
Thanks!
 
Old 04-02-2015, 01:26 AM   #19
Decimatrix
LQ Newbie
 
Registered: Mar 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
[ 2042.921032] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2042.921039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2094.625799] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2094.628304] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2094.628310] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2114.274410] CPU0: Core temperature above threshold, cpu clock throttled (total events = 55900)
[ 2114.276009] CPU0: Core temperature/speed normal
[ 2121.170652] CPU1: Core temperature above threshold, cpu clock throttled (total events = 14505)
[ 2121.172010] CPU1: Core temperature/speed normal
[ 2146.334308] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2146.336825] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2146.336833] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2172.446347] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2172.479065] cfg80211: Calling CRDA to update world regulatory domain
[ 2172.493028] cfg80211: World regulatory domain updated:
[ 2172.493034] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2172.493036] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493038] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493041] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2172.493043] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493045] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2173.740590] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2173.767207] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2173.768849] wlan0: authenticated
[ 2173.772185] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2173.778224] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2173.781562] wlan0: associated
[ 2174.984024] mce: [Hardware Error]: Machine check events logged
[ 2196.551257] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2196.555649] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2196.555656] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2248.229929] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2248.232854] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2248.232860] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2299.954344] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2299.960284] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2299.960292] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2351.654174] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2351.658993] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2351.659000] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2401.859103] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2401.863471] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2401.863476] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2414.272733] CPU0: Core temperature above threshold, cpu clock throttled (total events = 93548)
[ 2414.275249] CPU0: Core temperature/speed normal
[ 2421.175223] CPU1: Core temperature above threshold, cpu clock throttled (total events = 24961)
[ 2421.176007] CPU1: Core temperature/speed normal
[ 2453.532937] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2453.537819] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2453.537825] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2505.250031] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2505.252531] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2505.252537] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2513.489172] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2513.528199] cfg80211: Calling CRDA to update world regulatory domain
[ 2513.531948] cfg80211: World regulatory domain updated:
[ 2513.531954] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2513.531957] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531959] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531961] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2513.531963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531965] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2514.747914] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2514.760558] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2514.762144] wlan0: authenticated
[ 2514.764055] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2514.767534] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2514.769244] wlan0: associated
[ 2556.967659] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2556.970301] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2556.970308] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2580.412795] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2580.451380] cfg80211: Calling CRDA to update world regulatory domain
[ 2580.470480] cfg80211: World regulatory domain updated:
[ 2580.470486] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2580.470489] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470493] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2580.470495] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470498] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2581.977467] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2581.997174] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2582.007445] wlan0: authenticated
[ 2582.009850] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2582.014986] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2582.019231] wlan0: associated
[ 2608.691085] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2608.700205] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2608.700210] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2618.846802] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2618.886368] cfg80211: Calling CRDA to update world regulatory domain
[ 2618.890169] cfg80211: World regulatory domain updated:
[ 2618.890175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2618.890178] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890180] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890182] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2618.890184] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890186] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2620.122418] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2620.153382] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2620.155230] wlan0: authenticated
[ 2620.156034] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2620.160354] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2620.162072] wlan0: associated
[ 2656.937849] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2656.975112] cfg80211: Calling CRDA to update world regulatory domain
[ 2656.987547] cfg80211: World regulatory domain updated:
[ 2656.987554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2656.987557] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987561] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2656.987563] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987565] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2658.292625] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2658.317153] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2658.319649] wlan0: authenticated
[ 2658.325576] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2658.329172] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2658.330848] wlan0: associated
[ 2660.497265] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2660.499964] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2660.499971] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2699.984030] mce: [Hardware Error]: Machine check events logged
[ 2712.101448] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2712.104226] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2712.104233] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2714.342661] CPU0: Core temperature above threshold, cpu clock throttled (total events = 131652)
[ 2714.344009] CPU0: Core temperature/speed normal
[ 2721.859249] CPU1: Core temperature above threshold, cpu clock throttled (total events = 38524)
[ 2721.860008] CPU1: Core temperature/speed normal
[ 2724.015113] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2724.055450] cfg80211: Calling CRDA to update world regulatory domain
[ 2724.068888] cfg80211: World regulatory domain updated:
[ 2724.068896] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2724.068899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068901] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068903] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2724.068905] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068907] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2725.307260] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2725.328462] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2725.330288] wlan0: authenticated
[ 2725.336034] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2725.339565] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2725.344963] wlan0: associated
[ 2763.821318] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2763.826067] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2763.826072] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2815.518636] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2815.522142] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2815.522147] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2849.984045] mce: [Hardware Error]: Machine check events logged
[ 2867.231578] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2867.234253] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2867.234259] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2918.988595] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2918.991085] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2918.991089] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2970.654772] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2970.657276] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2970.657282] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3014.345344] CPU0: Core temperature above threshold, cpu clock throttled (total events = 166830)
[ 3014.347120] CPU0: Core temperature/speed normal
[ 3021.856853] CPU1: Core temperature above threshold, cpu clock throttled (total events = 49852)
[ 3021.859054] CPU1: Core temperature/speed normal
[ 3022.366878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3022.369501] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3022.369508] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3074.078451] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3074.080982] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3074.080987] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3074.984576] mce: [Hardware Error]: Machine check events logged
[ 3125.786689] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3125.789316] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3125.789322] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3177.503878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3177.506381] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3177.506390] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3229.214317] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3229.218448] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3229.218453] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3280.926207] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3280.928702] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3280.928707] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3314.344614] CPU0: Core temperature above threshold, cpu clock throttled (total events = 193217)
[ 3314.346897] CPU0: Core temperature/speed normal
[ 3321.906123] CPU1: Core temperature above threshold, cpu clock throttled (total events = 55866)
[ 3321.907921] CPU1: Core temperature/speed normal
[ 3332.634704] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3332.637336] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3332.637342] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3384.350060] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3384.353052] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3384.353057] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3436.065910] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3436.070032] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3436.070038] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3487.777924] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3487.780554] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3487.780560] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3539.486196] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3539.488699] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3539.488705] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3591.197572] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3591.200289] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3591.200295] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3599.984024] mce: [Hardware Error]: Machine check events logged
[ 3614.356652] CPU0: Core temperature above threshold, cpu clock throttled (total events = 219763)
[ 3614.358930] CPU0: Core temperature/speed normal
[ 3623.677171] CPU1: Core temperature above threshold, cpu clock throttled (total events = 60967)
[ 3623.679264] CPU1: Core temperature/speed normal
[ 3642.912726] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3642.915322] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3642.915327] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3694.618878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3694.621376] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3694.621383] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3746.330785] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3746.333283] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3746.333287] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3749.984041] mce: [Hardware Error]: Machine check events logged
[ 3772.625283] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 3772.658430] cfg80211: Calling CRDA to update world regulatory domain
[ 3772.665227] cfg80211: World regulatory domain updated:
[ 3772.665234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3772.665237] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665239] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665241] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3772.665243] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665245] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3773.573279] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 3773.592274] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 3773.595417] wlan0: authenticated
[ 3773.596033] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 3773.599560] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 3773.601448] wlan0: associated
[ 3798.042933] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3798.045541] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3798.045547] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3849.754811] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3849.757437] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3849.757450] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3885.668754] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 3885.704200] cfg80211: Calling CRDA to update world regulatory domain
[ 3885.709070] cfg80211: World regulatory domain updated:
[ 3885.709077] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3885.709079] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709082] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709084] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3885.709086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709088] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.922469] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 3885.934247] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 3885.937670] wlan0: authenticated
[ 3885.940036] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 3885.943522] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 3885.945261] wlan0: associated
[ 3901.470466] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3901.473093] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3901.473100] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3953.178951] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3953.181465] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3953.181474] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3959.486723] usb 1-3: USB disconnect, device number 2
[ 3959.728054] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 3960.115954] usb 1-3: New USB device found, idVendor=0bda, idProduct=0159
[ 3960.115961] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3960.115965] usb 1-3: Product: USB2.0-CRW
[ 3960.115968] usb 1-3: Manufacturer: Generic
[ 3960.115970] usb 1-3: SerialNumber: 20071114173400000
[ 3960.121993] ums-realtek 1-3:1.0: USB Mass Storage device detected
[ 3960.134333] scsi7 : usb-storage 1-3:1.0
[ 3960.265971] usb 1-3: USB disconnect, device number 3
[ 3960.540075] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 3960.928310] usb 1-3: New USB device found, idVendor=0bda, idProduct=0159
[ 3960.928316] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3960.928319] usb 1-3: Product: USB2.0-CRW
[ 3960.928321] usb 1-3: Manufacturer: Generic
[ 3960.928324] usb 1-3: SerialNumber: 20071114173400000
[ 3960.934107] ums-realtek 1-3:1.0: USB Mass Storage device detected
[ 3960.946476] scsi8 : usb-storage 1-3:1.0
[ 3961.946960] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3961.951188] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3961.957194] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4013.594745] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4013.597372] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4013.597380] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4054.039907] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 4054.070372] cfg80211: Calling CRDA to update world regulatory domain
[ 4054.074236] cfg80211: World regulatory domain updated:
[ 4054.074243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4054.074245] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074248] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074250] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4054.074252] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074254] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4055.010690] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4055.023414] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4055.025036] wlan0: authenticated
[ 4055.032038] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4055.035555] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 4055.037307] wlan0: associated
[ 4063.802953] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4063.805446] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4063.805453] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4074.264170] CPU0: Core temperature above threshold, cpu clock throttled (total events = 226342)
[ 4074.265819] CPU0: Core temperature/speed normal
[ 4097.120495] CPU1: Core temperature above threshold, cpu clock throttled (total events = 61929)
[ 4097.122945] CPU1: Core temperature/speed normal
[ 4115.487742] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4115.490232] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4115.490240] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4167.195182] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4167.197789] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4167.197795] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4171.300075] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4171.384394] cfg80211: Calling CRDA to update world regulatory domain
[ 4171.388799] cfg80211: World regulatory domain updated:
[ 4171.388804] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4171.388806] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388809] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388811] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4171.388813] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388815] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4172.462738] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4172.472801] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4172.474494] wlan0: authenticated
[ 4172.476146] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4172.486878] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=5)
[ 4172.488421] wlan0: associated
[ 4178.700566] systemd-hostnamed[8410]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4218.907182] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4218.909920] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4218.909925] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4243.756068] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4243.853272] cfg80211: Calling CRDA to update world regulatory domain
[ 4243.857751] cfg80211: World regulatory domain updated:
[ 4243.857755] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4243.857758] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857760] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4243.857765] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857767] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4245.063026] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4245.074851] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4245.112085] wlan0: authenticated
[ 4245.122246] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4245.135331] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=1)
[ 4245.139635] wlan0: associated
[ 4265.002544] r8169 0000:02:00.0 eth0: link down
[ 4265.253285] r8169 0000:02:00.0 eth0: link down
[ 4265.253356] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4266.216057] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4266.283463] cfg80211: Calling CRDA to update world regulatory domain
[ 4266.287139] cfg80211: World regulatory domain updated:
[ 4266.287144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4266.287147] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287149] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287151] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4266.287153] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287155] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.954046] r8169 0000:02:00.0 eth0: link up
[ 4266.954058] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4267.392752] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4267.412170] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4267.516040] wlan0: send auth to 10:c3:7b:de:b4:18 (try 2/3)
[ 4267.620034] wlan0: send auth to 10:c3:7b:de:b4:18 (try 3/3)
[ 4267.724054] wlan0: authentication with 10:c3:7b:de:b4:18 timed out
[ 4270.618870] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4270.621365] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4270.621370] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4271.315312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4271.485252] r8169 0000:02:00.0 eth0: link down
[ 4271.485273] r8169 0000:02:00.0 eth0: link down
[ 4271.485401] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4271.575563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4273.094391] r8169 0000:02:00.0 eth0: link up
[ 4273.094403] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4276.324922] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4276.521302] r8169 0000:02:00.0 eth0: link down
[ 4276.521327] r8169 0000:02:00.0 eth0: link down
[ 4276.521366] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4276.665224] r8169 0000:02:00.0 eth0: link down
[ 4276.665351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4279.522263] r8169 0000:02:00.0 eth0: link up
[ 4279.522280] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4288.623888] r8169 0000:02:00.0 eth0: link down
[ 4290.196913] r8169 0000:02:00.0 eth0: link up
[ 4301.024499] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4301.036131] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4301.037726] wlan0: authenticated
[ 4301.040220] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4301.044077] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=4)
[ 4301.045613] wlan0: associated
[ 4301.046402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4322.330955] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4322.333456] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4322.333463] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4374.042850] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4374.045357] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4374.045363] sd 8:0:0:0: [sdb] Assuming drive cache: write through

None of those fixes worked... should I just take the router back for a different one?
 
Old 04-02-2015, 05:38 PM   #20
ardvark71
LQ Veteran
 
Registered: Feb 2015
Location: Oregon, USA
Distribution: Lubuntu 14.04, Windows Vista
Posts: 5,164
Blog Entries: 3

Rep: Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691
Quote:
Originally Posted by Decimatrix View Post
None of those fixes worked... should I just take the router back for a different one?
I'm not sure what else to advise here. If your old one worked without any problems, I would go back to it.

Regards...
 
Old 04-02-2015, 08:12 PM   #21
Decimatrix
LQ Newbie
 
Registered: Mar 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
Oddly enough, when I woke up this morning it was working correctly... I have no idea why, but I've even restarted my laptop to check, and it does work.
 
Old 04-03-2015, 01:34 AM   #22
ardvark71
LQ Veteran
 
Registered: Feb 2015
Location: Oregon, USA
Distribution: Lubuntu 14.04, Windows Vista
Posts: 5,164
Blog Entries: 3

Rep: Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691Reputation: 691
Quote:
Originally Posted by Decimatrix View Post
Oddly enough, when I woke up this morning it was working correctly... I have no idea why, but I've even restarted my laptop to check, and it does work.
Wow, praise God, you don't hear that every day.

If it stays working, please mark this thread as "SOLVED."

Thanks!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Wireless and wired connection to same router, wireless not working GeoNeil Linux - Wireless Networking 1 03-30-2011 05:45 AM
Wireless G or N Router Networking, Ethernet, Wireless Adaptor and Connection Issues. RenCat General 1 02-06-2010 11:27 AM
[SOLVED] trouble! - bad wireless connection kaz2100 Linux - Wireless Networking 8 03-23-2006 02:22 PM
Wireless card..Wireless router.. Slackware 10.2 ..Problems with Internet Connection. Storm Bringer Linux - Wireless Networking 4 03-23-2006 07:25 AM
wireless router to wireless router connection questions mister_math Linux - Wireless Networking 0 08-06-2003 02:50 PM


All times are GMT -5. The time now is 07:00 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration