[SOLVED] Wireless has bad connection from RT-N66R Gigabit Router

michaelk · 04-01-2015, 10:27 PM

samba really has nothing to do with the wireless connection.
systemctl stop samba

Wireless worked prior to installing a new router? Were any other changes made to your laptop? I might try lowering the wireless speed to see if that makes a difference.

Decimatrix · 04-01-2015, 11:18 PM

Wireless worked fine before the switch, though it did this thing where only my laptop could access it after a while, every other device in the house couldn't use it. Basically the opposite of my current situation. Also, would I be able to safely remove samba from my system, as far as I know I've never used it until now

ardvark71 · 04-02-2015, 12:16 AM

Hi...

Some additional things to try that I found here...

1. "...change the wep encryption to just wpa2 (CCMP)(AES) not (TKIP) if you have that option..."

2. "...set your wireless channel in the router to 1 or 11 then save the router configuration and reboot it."

3. "...go into network manager at top right corner of the screen and click on edit connections>wireless tab and set IPV6 to ignore."

DON'T do any of the others! Does this help?

Also, could you open a terminal and post (copy and paste) the output of this command...

Code:

dmesg

Thanks!

Decimatrix · 04-02-2015, 12:26 AM

[ 2042.921032] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2042.921039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2094.625799] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2094.628304] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2094.628310] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2114.274410] CPU0: Core temperature above threshold, cpu clock throttled (total events = 55900)
[ 2114.276009] CPU0: Core temperature/speed normal
[ 2121.170652] CPU1: Core temperature above threshold, cpu clock throttled (total events = 14505)
[ 2121.172010] CPU1: Core temperature/speed normal
[ 2146.334308] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2146.336825] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2146.336833] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2172.446347] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2172.479065] cfg80211: Calling CRDA to update world regulatory domain
[ 2172.493028] cfg80211: World regulatory domain updated:
[ 2172.493034] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2172.493036] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493038] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493041] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2172.493043] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2172.493045] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2173.740590] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2173.767207] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2173.768849] wlan0: authenticated
[ 2173.772185] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2173.778224] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2173.781562] wlan0: associated
[ 2174.984024] mce: [Hardware Error]: Machine check events logged
[ 2196.551257] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2196.555649] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2196.555656] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2248.229929] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2248.232854] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2248.232860] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2299.954344] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2299.960284] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2299.960292] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2351.654174] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2351.658993] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2351.659000] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2401.859103] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2401.863471] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2401.863476] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2414.272733] CPU0: Core temperature above threshold, cpu clock throttled (total events = 93548)
[ 2414.275249] CPU0: Core temperature/speed normal
[ 2421.175223] CPU1: Core temperature above threshold, cpu clock throttled (total events = 24961)
[ 2421.176007] CPU1: Core temperature/speed normal
[ 2453.532937] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2453.537819] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2453.537825] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2505.250031] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2505.252531] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2505.252537] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2513.489172] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2513.528199] cfg80211: Calling CRDA to update world regulatory domain
[ 2513.531948] cfg80211: World regulatory domain updated:
[ 2513.531954] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2513.531957] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531959] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531961] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2513.531963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2513.531965] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2514.747914] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2514.760558] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2514.762144] wlan0: authenticated
[ 2514.764055] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2514.767534] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2514.769244] wlan0: associated
[ 2556.967659] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2556.970301] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2556.970308] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2580.412795] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2580.451380] cfg80211: Calling CRDA to update world regulatory domain
[ 2580.470480] cfg80211: World regulatory domain updated:
[ 2580.470486] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2580.470489] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470493] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2580.470495] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2580.470498] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2581.977467] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2581.997174] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2582.007445] wlan0: authenticated
[ 2582.009850] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2582.014986] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2582.019231] wlan0: associated
[ 2608.691085] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2608.700205] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2608.700210] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2618.846802] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2618.886368] cfg80211: Calling CRDA to update world regulatory domain
[ 2618.890169] cfg80211: World regulatory domain updated:
[ 2618.890175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2618.890178] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890180] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890182] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2618.890184] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2618.890186] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2620.122418] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2620.153382] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2620.155230] wlan0: authenticated
[ 2620.156034] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2620.160354] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2620.162072] wlan0: associated
[ 2656.937849] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2656.975112] cfg80211: Calling CRDA to update world regulatory domain
[ 2656.987547] cfg80211: World regulatory domain updated:
[ 2656.987554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2656.987557] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987561] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2656.987563] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2656.987565] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2658.292625] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2658.317153] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2658.319649] wlan0: authenticated
[ 2658.325576] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2658.329172] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2658.330848] wlan0: associated
[ 2660.497265] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2660.499964] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2660.499971] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2699.984030] mce: [Hardware Error]: Machine check events logged
[ 2712.101448] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2712.104226] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2712.104233] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2714.342661] CPU0: Core temperature above threshold, cpu clock throttled (total events = 131652)
[ 2714.344009] CPU0: Core temperature/speed normal
[ 2721.859249] CPU1: Core temperature above threshold, cpu clock throttled (total events = 38524)
[ 2721.860008] CPU1: Core temperature/speed normal
[ 2724.015113] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 2724.055450] cfg80211: Calling CRDA to update world regulatory domain
[ 2724.068888] cfg80211: World regulatory domain updated:
[ 2724.068896] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2724.068899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068901] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068903] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2724.068905] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2724.068907] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2725.307260] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 2725.328462] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 2725.330288] wlan0: authenticated
[ 2725.336034] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 2725.339565] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 2725.344963] wlan0: associated
[ 2763.821318] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2763.826067] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2763.826072] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2815.518636] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2815.522142] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2815.522147] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2849.984045] mce: [Hardware Error]: Machine check events logged
[ 2867.231578] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2867.234253] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2867.234259] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2918.988595] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2918.991085] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2918.991089] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2970.654772] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2970.657276] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2970.657282] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3014.345344] CPU0: Core temperature above threshold, cpu clock throttled (total events = 166830)
[ 3014.347120] CPU0: Core temperature/speed normal
[ 3021.856853] CPU1: Core temperature above threshold, cpu clock throttled (total events = 49852)
[ 3021.859054] CPU1: Core temperature/speed normal
[ 3022.366878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3022.369501] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3022.369508] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3074.078451] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3074.080982] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3074.080987] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3074.984576] mce: [Hardware Error]: Machine check events logged
[ 3125.786689] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3125.789316] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3125.789322] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3177.503878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3177.506381] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3177.506390] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3229.214317] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3229.218448] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3229.218453] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3280.926207] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3280.928702] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3280.928707] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3314.344614] CPU0: Core temperature above threshold, cpu clock throttled (total events = 193217)
[ 3314.346897] CPU0: Core temperature/speed normal
[ 3321.906123] CPU1: Core temperature above threshold, cpu clock throttled (total events = 55866)
[ 3321.907921] CPU1: Core temperature/speed normal
[ 3332.634704] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3332.637336] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3332.637342] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3384.350060] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3384.353052] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3384.353057] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3436.065910] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3436.070032] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3436.070038] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3487.777924] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3487.780554] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3487.780560] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3539.486196] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3539.488699] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3539.488705] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3591.197572] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3591.200289] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3591.200295] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3599.984024] mce: [Hardware Error]: Machine check events logged
[ 3614.356652] CPU0: Core temperature above threshold, cpu clock throttled (total events = 219763)
[ 3614.358930] CPU0: Core temperature/speed normal
[ 3623.677171] CPU1: Core temperature above threshold, cpu clock throttled (total events = 60967)
[ 3623.679264] CPU1: Core temperature/speed normal
[ 3642.912726] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3642.915322] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3642.915327] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3694.618878] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3694.621376] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3694.621383] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3746.330785] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3746.333283] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3746.333287] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3749.984041] mce: [Hardware Error]: Machine check events logged
[ 3772.625283] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 3772.658430] cfg80211: Calling CRDA to update world regulatory domain
[ 3772.665227] cfg80211: World regulatory domain updated:
[ 3772.665234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3772.665237] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665239] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665241] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3772.665243] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3772.665245] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3773.573279] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 3773.592274] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 3773.595417] wlan0: authenticated
[ 3773.596033] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 3773.599560] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 3773.601448] wlan0: associated
[ 3798.042933] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3798.045541] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3798.045547] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3849.754811] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3849.757437] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3849.757450] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3885.668754] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 3885.704200] cfg80211: Calling CRDA to update world regulatory domain
[ 3885.709070] cfg80211: World regulatory domain updated:
[ 3885.709077] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3885.709079] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709082] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709084] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3885.709086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.709088] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.922469] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 3885.934247] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 3885.937670] wlan0: authenticated
[ 3885.940036] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 3885.943522] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 3885.945261] wlan0: associated
[ 3901.470466] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3901.473093] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3901.473100] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3953.178951] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3953.181465] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 3953.181474] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3959.486723] usb 1-3: USB disconnect, device number 2
[ 3959.728054] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 3960.115954] usb 1-3: New USB device found, idVendor=0bda, idProduct=0159
[ 3960.115961] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3960.115965] usb 1-3: Product: USB2.0-CRW
[ 3960.115968] usb 1-3: Manufacturer: Generic
[ 3960.115970] usb 1-3: SerialNumber: 20071114173400000
[ 3960.121993] ums-realtek 1-3:1.0: USB Mass Storage device detected
[ 3960.134333] scsi7 : usb-storage 1-3:1.0
[ 3960.265971] usb 1-3: USB disconnect, device number 3
[ 3960.540075] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 3960.928310] usb 1-3: New USB device found, idVendor=0bda, idProduct=0159
[ 3960.928316] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3960.928319] usb 1-3: Product: USB2.0-CRW
[ 3960.928321] usb 1-3: Manufacturer: Generic
[ 3960.928324] usb 1-3: SerialNumber: 20071114173400000
[ 3960.934107] ums-realtek 1-3:1.0: USB Mass Storage device detected
[ 3960.946476] scsi8 : usb-storage 1-3:1.0
[ 3961.946960] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3961.951188] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3961.957194] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4013.594745] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4013.597372] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4013.597380] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4054.039907] wlan0: deauthenticating from 10:c3:7b:de:b4:18 by local choice (reason=3)
[ 4054.070372] cfg80211: Calling CRDA to update world regulatory domain
[ 4054.074236] cfg80211: World regulatory domain updated:
[ 4054.074243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4054.074245] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074248] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074250] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4054.074252] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4054.074254] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4055.010690] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4055.023414] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4055.025036] wlan0: authenticated
[ 4055.032038] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4055.035555] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=3)
[ 4055.037307] wlan0: associated
[ 4063.802953] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4063.805446] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4063.805453] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4074.264170] CPU0: Core temperature above threshold, cpu clock throttled (total events = 226342)
[ 4074.265819] CPU0: Core temperature/speed normal
[ 4097.120495] CPU1: Core temperature above threshold, cpu clock throttled (total events = 61929)
[ 4097.122945] CPU1: Core temperature/speed normal
[ 4115.487742] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4115.490232] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4115.490240] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4167.195182] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4167.197789] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4167.197795] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4171.300075] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4171.384394] cfg80211: Calling CRDA to update world regulatory domain
[ 4171.388799] cfg80211: World regulatory domain updated:
[ 4171.388804] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4171.388806] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388809] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388811] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4171.388813] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4171.388815] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4172.462738] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4172.472801] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4172.474494] wlan0: authenticated
[ 4172.476146] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4172.486878] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=5)
[ 4172.488421] wlan0: associated
[ 4178.700566] systemd-hostnamed[8410]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4218.907182] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4218.909920] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4218.909925] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4243.756068] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4243.853272] cfg80211: Calling CRDA to update world regulatory domain
[ 4243.857751] cfg80211: World regulatory domain updated:
[ 4243.857755] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4243.857758] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857760] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4243.857765] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4243.857767] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4245.063026] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4245.074851] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4245.112085] wlan0: authenticated
[ 4245.122246] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4245.135331] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=1)
[ 4245.139635] wlan0: associated
[ 4265.002544] r8169 0000:02:00.0 eth0: link down
[ 4265.253285] r8169 0000:02:00.0 eth0: link down
[ 4265.253356] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4266.216057] wlan0: Connection to AP 10:c3:7b:de:b4:18 lost
[ 4266.283463] cfg80211: Calling CRDA to update world regulatory domain
[ 4266.287139] cfg80211: World regulatory domain updated:
[ 4266.287144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4266.287147] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287149] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287151] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4266.287153] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.287155] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4266.954046] r8169 0000:02:00.0 eth0: link up
[ 4266.954058] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4267.392752] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4267.412170] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4267.516040] wlan0: send auth to 10:c3:7b:de:b4:18 (try 2/3)
[ 4267.620034] wlan0: send auth to 10:c3:7b:de:b4:18 (try 3/3)
[ 4267.724054] wlan0: authentication with 10:c3:7b:de:b4:18 timed out
[ 4270.618870] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4270.621365] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4270.621370] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4271.315312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4271.485252] r8169 0000:02:00.0 eth0: link down
[ 4271.485273] r8169 0000:02:00.0 eth0: link down
[ 4271.485401] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4271.575563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4273.094391] r8169 0000:02:00.0 eth0: link up
[ 4273.094403] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4276.324922] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4276.521302] r8169 0000:02:00.0 eth0: link down
[ 4276.521327] r8169 0000:02:00.0 eth0: link down
[ 4276.521366] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4276.665224] r8169 0000:02:00.0 eth0: link down
[ 4276.665351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4279.522263] r8169 0000:02:00.0 eth0: link up
[ 4279.522280] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4288.623888] r8169 0000:02:00.0 eth0: link down
[ 4290.196913] r8169 0000:02:00.0 eth0: link up
[ 4301.024499] wlan0: authenticate with 10:c3:7b:de:b4:18
[ 4301.036131] wlan0: send auth to 10:c3:7b:de:b4:18 (try 1/3)
[ 4301.037726] wlan0: authenticated
[ 4301.040220] wlan0: associate with 10:c3:7b:de:b4:18 (try 1/3)
[ 4301.044077] wlan0: RX AssocResp from 10:c3:7b:de:b4:18 (capab=0x411 status=0 aid=4)
[ 4301.045613] wlan0: associated
[ 4301.046402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4322.330955] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4322.333456] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4322.333463] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4374.042850] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 4374.045357] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 4374.045363] sd 8:0:0:0: [sdb] Assuming drive cache: write through

None of those fixes worked... should I just take the router back for a different one?

ardvark71 · 04-02-2015, 04:38 PM

Quote:

Originally Posted by Decimatrix

None of those fixes worked... should I just take the router back for a different one?

I'm not sure what else to advise here. If your old one worked without any problems, I would go back to it.

Regards...

Decimatrix · 04-02-2015, 07:12 PM

Oddly enough, when I woke up this morning it was working correctly... I have no idea why, but I've even restarted my laptop to check, and it does work.

ardvark71 · 04-03-2015, 12:34 AM

Quote:

Originally Posted by Decimatrix

Oddly enough, when I woke up this morning it was working correctly... I have no idea why, but I've even restarted my laptop to check, and it does work.

Wow, praise God, you don't hear that every day.

If it stays working, please mark this thread as "SOLVED."

Thanks!