LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 08-06-2014, 09:16 PM   #1
KaliLover
LQ Newbie
 
Registered: Aug 2014
Posts: 11

Rep: Reputation: 7
Wireless Card not compatible???


Hi all...Im new to these forums and linux all together, so forgive me if I sound naive or posted in the wrong category...
I have a compaq presario that I installed kali on and for some reason it doesnt show any wireless interface. My wifi light on my keyboard is on which tells me its not a problem with the card itself, but when i try ifconfig wlan0 up it saysit doesnt exist. Also here is my output from lspci -v. Any help would be appreciated!

~# lspci -v
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
Subsystem: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
Flags: bus master, 66MHz, medium devsel, latency 32

00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6250] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at 80000000 (32-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=256]
Memory at 90300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon

00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
I/O ports at 4118 [size=8]
I/O ports at 4124 [size=4]
I/O ports at 4110 [size=8]
I/O ports at 4120 [size=4]
I/O ports at 4100 [size=16]
Memory at 90349000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at 90348000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at 90347000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
Subsystem: Hewlett-Packard Company Device 3577
Flags: 66MHz, medium devsel
Kernel driver in use: piix4_smbus

00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at 90340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at 90346000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90200000-902fffff
Prefetchable memory behind bridge: 0000000090000000-00000000900fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 0000000090100000-00000000901fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at 90345000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at 90344000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
Flags: fast devsel

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
Flags: fast devsel

00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
Flags: fast devsel

00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
Flags: fast devsel

00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
Flags: fast devsel

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at 90201000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: rtsx_pci

02:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 90200000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [b0] Express Endpoint, MSI 01
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: sdhci-pci

06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: Hewlett-Packard Company Device 3577
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at 2000 [size=256]
Memory at 90104000 (64-bit, prefetchable) [size=4K]
Memory at 90100000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
 
Old 08-06-2014, 10:03 PM   #2
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
What color is the light? Have you tried rfkill?http://wireless.kernel.org/en/users/...ntation/rfkill
 
Old 08-06-2014, 11:34 PM   #3
KaliLover
LQ Newbie
 
Registered: Aug 2014
Posts: 11

Original Poster
Rep: Reputation: 7
Thanks for replying....yes tried rfkill light is white
 
Old 08-07-2014, 03:45 AM   #4
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
read the rfkill docs.
Post outplut of
Quote:
rfkill list
Quote:
dmesg
dmesg should be requesting a module
I don't see your wireless card it only shows ethernet
For future posts anytime you run a command "& post here wrap
Code tags around it. Or just highlight & use the quote icon above.
 
Old 08-07-2014, 09:49 PM   #5
KaliLover
LQ Newbie
 
Registered: Aug 2014
Posts: 11

Original Poster
Rep: Reputation: 7
ok sry bout that...These last 24 hrs i been trying countless different methods posted in this site or that site, and i still havent progressed...I've tried installing the bcm-kernel-source method, followed the steps in this post>> and even downloaded the windows driver and installed the inf file, though I shouldve done more research on that method...
The result of rfkill list shows nothing at all.

I should mention that I'm using my android phone as a connection to the internet, under the iface usb0. I also probably made a mess of my configuraton files by following random methods and not backing up the originals...I've learned my lesson. I've learned a lot since switching from a web-surfing windows user to BT5, but the sheer amount of knowledge one must retain in order to accurately troubleshoot the every-day problems linux noobs encounter is humbling to say the least. Thanks for your input.

---------- Post added 08-07-14 at 03:49 PM ----------

Code:
# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-kali1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.14.5-1kali1 (2014-06-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-kali1-amd64 root=UUID=b21db5dd-8478-4c1c-9471-c5ae0f478beb ro initrd=/install/initrd.gz
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000066b3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000066b3f000-0x0000000066bbefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000066bbf000-0x0000000066ebefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000066ebf000-0x0000000066ef5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000066ef6000-0x0000000066efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000066f00000-0x000000007effffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard Presario CQ57 Notebook PC       /3577, BIOS F.02 03/14/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x66f00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 060000000 mask FF8000000 write-back
[    0.000000]   3 base 066EBD000 mask FFFFFF000 uncachable
[    0.000000]   4 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[    0.000000] BRK [0x01aa4000, 0x01aa4fff] PGTABLE
[    0.000000] BRK [0x01aa5000, 0x01aa5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x66800000-0x669fffff]
[    0.000000]  [mem 0x66800000-0x669fffff] page 2M
[    0.000000] BRK [0x01aa6000, 0x01aa6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x64000000-0x667fffff]
[    0.000000]  [mem 0x64000000-0x667fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x63ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x63ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x66a00000-0x66b3efff]
[    0.000000]  [mem 0x66a00000-0x66b3efff] page 4k
[    0.000000] BRK [0x01aa7000, 0x01aa7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x66ef6000-0x66efffff]
[    0.000000]  [mem 0x66ef6000-0x66efffff] page 4k
[    0.000000] BRK [0x01aa8000, 0x01aa8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c1c000-0x36e05fff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0000000066ef5120 000074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0000000066ef4000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0000000066ee1000 00E2B4 (v01 HP     INSYDE   F0000000 MSFT 01000013)
[    0.000000] ACPI: FACS 0000000066c96000 000040
[    0.000000] ACPI: HPET 0000000066ef3000 000038 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0000000066ef2000 000084 (v02 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0000000066ef1000 00003C (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 0000000066ef0000 0000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 0000000066ee0000 000028 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0000000066edf000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MSDM 0000000066ede000 000055 (v03 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0000000066edd000 00030C (v01 HP     INSYDE   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0000000066edb000 0012FA (v02 HP     INSYDE   00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000066efffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x66efffff]
[    0.000000]   NODE_DATA [mem 0x66efb000-0x66efffff]
[    0.000000]  [ffffea0000000000-ffffea00017fffff] PMD -> [ffff880064800000-ffff880065ffffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x66b3efff]
[    0.000000]   node   0: [mem 0x66ef6000-0x66efffff]
[    0.000000] On node 0 totalpages: 420583
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5709 pages used for memmap
[    0.000000]   DMA32 zone: 416585 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x66b3f000-0x66bbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x66bbf000-0x66ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x66ebf000-0x66ef5fff]
[    0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880066800000 s86016 r8192 d20480 u524288
[    0.000000] pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 414797
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-kali1-amd64 root=UUID=b21db5dd-8478-4c1c-9471-c5ae0f478beb ro initrd=/install/initrd.gz
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1627696K/1682332K available (5102K kernel code, 703K rwdata, 1684K rodata, 1004K init, 960K bss, 54636K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 997.918 MHz processor
[    0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.83 BogoMIPS (lpj=3991672)
[    0.000197] pid_max: default: 32768 minimum: 301
[    0.000281] ACPI: Core revision 20131218
[    0.018133] ACPI: All ACPI Tables successfully acquired
[    0.020723] Security Framework initialized
[    0.020801] AppArmor: AppArmor disabled by boot time parameter
[    0.020864] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.021343] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.023839] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.025100] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.025241] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.025924] Initializing cgroup subsys memory
[    0.026067] Initializing cgroup subsys devices
[    0.026130] Initializing cgroup subsys freezer
[    0.026191] Initializing cgroup subsys net_cls
[    0.026252] Initializing cgroup subsys blkio
[    0.026312] Initializing cgroup subsys perf_event
[    0.026444] tseg: 0066f00000
[    0.026451] CPU: Physical Processor ID: 0
[    0.026568] CPU: Processor Core ID: 0
[    0.026628] mce: CPU supports 6 MCE banks
[    0.026706] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.026706] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.026706] tlb_flushall_shift: 6
[    0.027115] Freeing SMP alternatives memory: 20K (ffffffff819ac000 - ffffffff819b1000)
[    0.031484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071242] smpboot: CPU0: AMD C-50 Processor (fam: 14, model: 01, stepping: 00)
[    0.177728] Performance Events: AMD PMU driver.
[    0.177839] ... version:                0
[    0.177898] ... bit width:              48
[    0.177957] ... generic registers:      4
[    0.178016] ... value mask:             0000ffffffffffff
[    0.178076] ... max period:             00007fffffffffff
[    0.178137] ... fixed-purpose events:   0
[    0.178195] ... event mask:             000000000000000f
[    0.179070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.179537] x86: Booting SMP configuration:
[    0.179658] .... node  #0, CPUs:      #1
[    0.192992] x86: Booted up 1 node, 2 CPUs
[    0.193103] smpboot: Total of 2 processors activated (3991.67 BogoMIPS)
[    0.194573] devtmpfs: initialized
[    0.208850] PM: Registering ACPI NVS region [mem 0x66bbf000-0x66ebefff] (3145728 bytes)
[    0.209923] pinctrl core: initialized pinctrl subsystem
[    0.210305] NET: Registered protocol family 16
[    0.210770] cpuidle: using governor ladder
[    0.210921] cpuidle: using governor menu
[    0.211180] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.211314] ACPI: bus type PCI registered
[    0.211375] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.211804] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.211945] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.218472] PCI: Using configuration type 1 for base access
[    0.218998] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.219062] mtrr: probably your BIOS does not setup all CPUs.
[    0.219123] mtrr: corrected configuration.
[    0.222320] bio: create slab <bio-0> at 0
[    0.222973] ACPI: Added _OSI(Module Device)
[    0.223041] ACPI: Added _OSI(Processor Device)
[    0.223103] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.223165] ACPI: Added _OSI(Processor Aggregator Device)
[    0.231268] ACPI: Executed 1 blocks of module-level executable AML code
[    0.241112] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.299183] ACPI: Interpreter enabled
[    0.299304] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.299473] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.299683] ACPI: (supports S0 S3 S4 S5)
[    0.299802] ACPI: Using IOAPIC for interrupt routing
[    0.300390] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.302249] ACPI: No dock devices found.
[    0.410098] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.410195] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.411308] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.411907] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[    0.412038] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.412896] PCI host bridge to bus 0000:00
[    0.412972] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.413038] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.413104] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.413169] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.413236] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.413302] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.413369] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.413435] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.413501] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.413567] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.413633] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.413699] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.413765] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.413831] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.413898] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.413964] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf7ffffff]
[    0.414030] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xffffffff]
[    0.414112] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.414393] pci 0000:00:01.0: [1002:9804] type 00 class 0x030000
[    0.414416] pci 0000:00:01.0: reg 0x10: [mem 0x80000000-0x8fffffff pref]
[    0.414430] pci 0000:00:01.0: reg 0x14: [io  0x4000-0x40ff]
[    0.414445] pci 0000:00:01.0: reg 0x18: [mem 0x90300000-0x9033ffff]
[    0.414527] pci 0000:00:01.0: supports D1 D2
[    0.414877] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.414911] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.414929] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.414947] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.414964] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.414982] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.415000] pci 0000:00:11.0: reg 0x24: [mem 0x90349000-0x903493ff]
[    0.415346] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.415373] pci 0000:00:12.0: reg 0x10: [mem 0x90348000-0x90348fff]
[    0.415584] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.415871] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.416484] pci 0000:00:12.2: reg 0x10: [mem 0x90347000-0x903470ff]
[    0.419664] pci 0000:00:12.2: supports D1 D2
[    0.419671] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.419803] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.420116] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.420526] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.420564] pci 0000:00:14.2: reg 0x10: [mem 0x90340000-0x90343fff 64bit]
[    0.420670] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.420973] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.421342] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.421515] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.421844] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.421871] pci 0000:00:14.5: reg 0x10: [mem 0x90346000-0x90346fff]
[    0.422074] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.422356] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.422487] pci 0000:00:15.0: supports D1 D2
[    0.422625] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.422913] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.423044] pci 0000:00:15.1: supports D1 D2
[    0.423179] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.423453] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.423479] pci 0000:00:16.0: reg 0x10: [mem 0x90345000-0x90345fff]
[    0.423683] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.423943] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.424552] pci 0000:00:16.2: reg 0x10: [mem 0x90344000-0x903440ff]
[    0.427732] pci 0000:00:16.2: supports D1 D2
[    0.427738] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.427868] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.428133] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.428381] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.428625] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.428870] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.429139] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.429379] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.429618] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.429859] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.430341] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.430421] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.430428] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.430435] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.430442] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.430448] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.430454] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.430461] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive dec
 
Old 08-07-2014, 09:51 PM   #6
KaliLover
LQ Newbie
 
Registered: Aug 2014
Posts: 11

Original Poster
Rep: Reputation: 7
Code:
[    0.430520] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
[    0.430820] pci 0000:02:00.0: [10ec:5209] type 00 class 0xff0000
[    0.430853] pci 0000:02:00.0: reg 0x10: [mem 0x90201000-0x90201fff]
[    0.431048] pci 0000:02:00.0: supports D1 D2
[    0.431054] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.431249] pci 0000:02:00.1: [10ec:5209] type 00 class 0x080500
[    0.431281] pci 0000:02:00.1: reg 0x10: [mem 0x90200000-0x902000ff]
[    0.431476] pci 0000:02:00.1: supports D1 D2
[    0.431482] pci 0000:02:00.1: PME# supported from D1 D2 D3hot
[    0.441216] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.441304] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.441317] pci 0000:00:15.0:   bridge window [mem 0x90200000-0x902fffff]
[    0.441331] pci 0000:00:15.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
[    0.441633] pci 0000:06:00.0: [10ec:8136] type 00 class 0x020000
[    0.441670] pci 0000:06:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.441718] pci 0000:06:00.0: reg 0x18: [mem 0x90104000-0x90104fff 64bit pref]
[    0.441749] pci 0000:06:00.0: reg 0x20: [mem 0x90100000-0x90103fff 64bit pref]
[    0.441902] pci 0000:06:00.0: supports D1 D2
[    0.441908] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.453203] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.453291] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.453311] pci 0000:00:15.1:   bridge window [mem 0x90100000-0x901fffff 64bit pref]
[    0.453360] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.483471] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.489777] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.490130] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.490677] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.490836] vgaarb: loaded
[    0.490893] vgaarb: bridge control possible 0000:00:01.0
[    0.491119] PCI: Using ACPI for IRQ routing
[    0.494173] PCI: pci_cache_line_size set to 64 bytes
[    0.494306] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.494314] e820: reserve RAM buffer [mem 0x66b3f000-0x67ffffff]
[    0.494319] e820: reserve RAM buffer [mem 0x66f00000-0x67ffffff]
[    0.494775] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.495002] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.497210] Switched to clocksource hpet
[    0.503719] pnp: PnP ACPI init
[    0.503933] ACPI: bus type PNP registered
[    0.504464] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.504593] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.504665] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.505295] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.505426] pnp 00:02: [dma 4]
[    0.505505] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.506165] system 00:06: [io  0x0400-0x04cf] could not be reserved
[    0.506235] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.506301] system 00:06: [io  0x04d6] has been reserved
[    0.506367] system 00:06: [io  0x0680-0x06ff] has been reserved
[    0.506432] system 00:06: [io  0x077a] has been reserved
[    0.506496] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.506562] system 00:06: [io  0x0c14] has been reserved
[    0.506626] system 00:06: [io  0x0c50-0x0c52] has been reserved
[    0.506887] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.507154] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.507258] system 00:07: [mem 0xffffffb0-0xfffffffe] has been reserved
[    0.507326] system 00:07: [mem 0xffffff00-0xfffffffe] could not be reserved
[    0.507394] system 00:07: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.507463] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.530911] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.531035] pnp 00:09: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[    0.532226] pnp: PnP ACPI: found 10 devices
[    0.532352] ACPI: bus type PNP unregistered
[    0.560696] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.560796] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.560863] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.560933] pci 0000:00:15.0:   bridge window [mem 0x90200000-0x902fffff]
[    0.561002] pci 0000:00:15.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
[    0.561087] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.561151] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.561237] pci 0000:00:15.1:   bridge window [mem 0x90100000-0x901fffff 64bit pref]
[    0.561324] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.561331] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.561338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.561363] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.561412] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff]
[    0.561418] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
[    0.561425] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.561432] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.561438] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.561444] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.561450] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.561456] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.561462] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.561468] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.561474] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.561480] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[    0.561486] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.561492] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.561498] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.561505] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[    0.561511] pci_bus 0000:01: resource 18 [mem 0x7f000000-0xf7ffffff]
[    0.561517] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
[    0.561523] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.561530] pci_bus 0000:02: resource 1 [mem 0x90200000-0x902fffff]
[    0.561536] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[    0.561543] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.561549] pci_bus 0000:06: resource 2 [mem 0x90100000-0x901fffff 64bit pref]
[    0.561700] NET: Registered protocol family 2
[    0.562360] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.562642] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.562891] TCP: Hash tables configured (established 16384 bind 16384)
[    0.563074] TCP: reno registered
[    0.563155] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.563259] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.563893] NET: Registered protocol family 1
[    0.564004] pci 0000:00:01.0: Boot video device
[    1.717740] PCI: CLS 64 bytes, default 64
[    1.717905] Unpacking initramfs...
[    2.728265] Freeing initrd memory: 18344K (ffff880035c1c000 - ffff880036e06000)
[    2.728682] Simple Boot Flag at 0x44 set to 0x1
[    2.729246] microcode: CPU0: patch_level=0x05000028
[    2.729518] microcode: CPU1: patch_level=0x05000028
[    2.730074] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.730325] LVT offset 0 assigned for vector 0x400
[    2.730541] perf: AMD IBS detected (0x000000ff)
[    2.732063] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    2.732536] audit: initializing netlink subsys (disabled)
[    2.732667] audit: type=2000 audit(1407459604.624:1): initialized
[    2.769811] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.770893] VFS: Disk quotas dquot_6.5.2
[    2.771219] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.771658] msgmni has been set to 3214
[    2.774657] alg: No test for stdrng (krng)
[    2.775068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.775473] io scheduler noop registered
[    2.775537] io scheduler deadline registered
[    2.775724] io scheduler cfq registered (default)
[    2.776501] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[    2.777011] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[    2.777362] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    2.777431] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.777496] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    2.777565] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    2.777615] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    2.777682] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    2.777750] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    2.777800] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.777970] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.778285] GHES: HEST is not enabled!
[    2.778860] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.782430] Linux agpgart interface v0.103
[    2.782932] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.794327] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.794408] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.795502] mousedev: PS/2 mouse device common for all mice
[    2.795936] rtc_cmos 00:04: RTC can wake from S4
[    2.796545] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.796721] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.796872] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.796939] AMD IOMMUv2 functionality not available on this system
[    2.797456] TCP: cubic registered
[    2.797804] NET: Registered protocol family 10
[    2.798864] mip6: Mobile IPv6
[    2.798967] NET: Registered protocol family 17
[    2.799057] mpls_gso: MPLS GSO support
[    2.800600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.802598] registered taskstats version 1
[    2.804512] rtc_cmos 00:04: setting system clock to 2014-08-08 01:00:05 UTC (1407459605)
[    2.805032] PM: Hibernation image not present or could not be loaded.
[    2.808121] Freeing unused kernel memory: 1004K (ffffffff818b1000 - ffffffff819ac000)
[    2.808221] Write protecting the kernel read-only data: 8192k
[    2.817830] Freeing unused kernel memory: 1032K (ffff8800014fe000 - ffff880001600000)
[    2.821184] Freeing unused kernel memory: 364K (ffff8800017a5000 - ffff880001800000)
[    3.137426] udevd[62]: starting version 175
[    3.220178] SCSI subsystem initialized
[    3.225180] ACPI: bus type USB registered
[    3.225432] usbcore: registered new interface driver usbfs
[    3.225588] usbcore: registered new interface driver hub
[    3.235554] usbcore: registered new device driver usb
[    3.236950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.237548] ehci-pci: EHCI PCI platform driver
[    3.238036] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.238170] QUIRK: Enable AMD PLL fix
[    3.238226] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.238315] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.238407] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.238501] ehci-pci 0000:00:12.2: debug port 1
[    3.238648] ehci-pci 0000:00:12.2: irq 17, io mem 0x90347000
[    3.253995] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.255912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.256084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.257592] usb usb1: Product: EHCI Host Controller
[    3.257656] usb usb1: Manufacturer: Linux 3.14-kali1-amd64 ehci_hcd
[    3.257721] usb usb1: SerialNumber: 0000:00:12.2
[    3.264545] hub 1-0:1.0: USB hub found
[    3.264782] hub 1-0:1.0: 5 ports detected
[    3.266042] ehci-pci 0000:00:16.2: EHCI Host Controller
[    3.266123] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2
[    3.266209] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.266302] ehci-pci 0000:00:16.2: debug port 1
[    3.266429] ehci-pci 0000:00:16.2: irq 17, io mem 0x90344000
[    3.281018] libata version 3.00 loaded.
[    3.286749] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    3.286944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.287072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.287149] usb usb2: Product: EHCI Host Controller
[    3.287212] usb usb2: Manufacturer: Linux 3.14-kali1-amd64 ehci_hcd
[    3.287277] usb usb2: SerialNumber: 0000:00:16.2
[    3.287768] hub 2-0:1.0: USB hub found
[    3.287942] hub 2-0:1.0: 4 ports detected
[    3.289367] ohci-pci: OHCI PCI platform driver
[    3.289924] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.290006] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    3.290169] ohci-pci 0000:00:12.0: irq 18, io mem 0x90348000
[    3.302236] rtsx_pci 0000:02:00.0: irq 42 for MSI/MSI-X
[    3.302274] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    3.317063] thermal LNXTHERM:00: registered as thermal_zone0
[    3.317232] ACPI: Thermal Zone [TSZ0] (61 C)
[    3.338904] sdhci: Secure Digital Host Controller Interface driver
[    3.339070] sdhci: Copyright(c) Pierre Ossman
[    3.339952] sdhci-pci 0000:02:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    3.340481] sdhci-pci 0000:02:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.340575] sdhci-pci 0000:02:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.342771] mmc0: SDHCI controller on PCI [0000:02:00.1] using DMA
[    3.349115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.349284] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.349362] usb usb3: Product: OHCI PCI host controller
[    3.349425] usb usb3: Manufacturer: Linux 3.14-kali1-amd64 ohci_hcd
[    3.349491] usb usb3: SerialNumber: 0000:00:12.0
[    3.350510] hub 3-0:1.0: USB hub found
[    3.350685] hub 3-0:1.0: 5 ports detected
[    3.351324] ahci 0000:00:11.0: version 3.0
[    3.352006] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.352091] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc 
[    3.372825] scsi0 : ahci
[    3.394583] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.394778] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.395310] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
[    3.395890] r8169 0000:06:00.0 eth0: RTL8105e at 0xffffc900043e6000, 2c:27:d7:09:99:0c, XID 00a00000 IRQ 43
[    3.398809] scsi1 : ahci
[    3.399257] ata1: SATA max UDMA/133 abar m1024@0x90349000 port 0x90349100 irq 19
[    3.399338] ata2: SATA max UDMA/133 abar m1024@0x90349000 port 0x90349180 irq 19
[    3.399936] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.400034] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 4
[    3.400180] ohci-pci 0000:00:14.5: irq 18, io mem 0x90346000
[    3.458292] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.458417] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.458495] usb usb4: Product: OHCI PCI host controller
[    3.458559] usb usb4: Manufacturer: Linux 3.14-kali1-amd64 ohci_hcd
[    3.458627] usb usb4: SerialNumber: 0000:00:14.5
[    3.461424] hub 4-0:1.0: USB hub found
[    3.462122] hub 4-0:1.0: 2 ports detected
[    3.464391] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    3.464484] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 5
[    3.464624] ohci-pci 0000:00:16.0: irq 18, io mem 0x90345000
[    3.525196] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.525365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.525442] usb usb5: Product: OHCI PCI host controller
[    3.525505] usb usb5: Manufacturer: Linux 3.14-kali1-amd64 ohci_hcd
[    3.525569] usb usb5: SerialNumber: 0000:00:16.0
[    3.526351] hub 5-0:1.0: USB hub found
[    3.526505] hub 5-0:1.0: 4 ports detected
[    3.577157] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.722312] usb 1-1: New USB device found, idVendor=0bb4, idProduct=0ffe
[    3.722395] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.722462] usb 1-1: Product: Android Phone
[    3.722523] usb 1-1: Manufacturer: HTC
[    3.722583] usb 1-1: SerialNumber: HT13EHM00496
[    3.728882] tsc: Refined TSC clocksource calibration: 997.874 MHz
[    3.888971] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.890954] ata1.00: ATA-8: WDC WD2500BEVT-60A23T0, 02.01A02, max UDMA/100
[    3.891093] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.893441] ata1.00: configured for UDMA/100
[    3.894431] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-6 02.0 PQ: 0 ANSI: 5
[    3.904927] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.907359] ata2.00: ATAPI: hp       CDDVDW TS-L633R, 0300, max UDMA/100
[    3.914167] ata2.00: configured for UDMA/100
[    3.921992] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633R  0300 PQ: 0 ANSI: 5
[    3.944718] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.944963] sd 0:0:0:0: [sda] Write Protect is off
[    3.945030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.945100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.948031] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.948123] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.948679] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.952891] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    3.954731] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.954985] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.018146]  sda: sda1 sda2 < sda5 >
[    4.020864] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.141007] usb 2-2: New USB device found, idVendor=04f2, idProduct=b293
[    4.141092] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.141160] usb 2-2: Product: HP Webcam-101
[    4.141222] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
[    4.141289] usb 2-2: SerialNumber: SN0001
[    4.467434] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[    4.477785] microcode: CPU0: new patch_level=0x05000029
[    4.487954] microcode: CPU1: new patch_level=0x05000029
[    4.508636] device-mapper: uevent: version 1.0.3
[    4.508999] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    4.544961] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    4.572928] PM: Starting manual resume from disk
[    4.573074] PM: Hibernation image partition 8:5 present
[    4.573078] PM: Looking for hibernation image.
[    4.574003] PM: Image not found (code -22)
[    4.574015] PM: Hibernation image not present or could not be loaded.
[    4.658293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.722186] usb 3-2: New USB device found, idVendor=045e, idProduct=00f6
[    4.722334] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.722401] usb 3-2: Product: Comfort Optical Mouse 1000
[    4.722464] usb 3-2: Manufacturer: Microsoft
[    4.728967] Switched to clocksource tsc
[    4.860742] usb 3-3: new low-speed USB device number 3 using ohci-pci
[    5.000682] usb 3-3: device descriptor read/64, error -62
[    5.244655] usb 3-3: device descriptor read/64, error -62
[    5.484597] usb 3-3: new low-speed USB device number 4 using ohci-pci
[    5.624635] usb 3-3: device descriptor read/64, error -62
[    5.706236] random: nonblocking pool is initialized
[    5.868543] usb 3-3: device descriptor read/64, error -62
[    6.108492] usb 3-3: new low-speed USB device number 5 using ohci-pci
[    6.516256] usb 3-3: device not accepting address 5, error -62
[    6.656439] usb 3-3: new low-speed USB device number 6 using ohci-pci
[    7.064281] usb 3-3: device not accepting address 6, error -62
[    7.064521] hub 3-0:1.0: unable to enumerate USB device on port 3
[    7.714956] udevd[383]: starting version 175
[    8.451910] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    8.452384] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.458951] ACPI: acpi_idle registered with cpuidle
[    8.459260] ACPI: Lid Switch [LID]
[    8.459565] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    8.459740] ACPI: Power Button [PWRB]
[    8.459991] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.461255] ACPI: Power Button [PWRF]
[    8.469768] ACPI: AC Adapter [AC] (on-line)
[    8.485029] acpi device:01: registered as cooling_device2
[    8.485386] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    8.585552] wmi: Mapper loaded
[    8.682505] ACPI: Battery Slot [BAT0] (battery present)
[    8.908862] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.119941] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    9.120326] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    9.150583] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    9.151455] sp5100_tco: PCI Revision ID: 0x42
[    9.151734] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    9.151877] sp5100_tco: Last reboot was not triggered by watchdog.
[    9.152110] sp5100_tco: initialized (0xffffc900043ecb00). heartbeat=60 sec (nowayout=0)
[    9.169089] kvm: disabled by bios
[    9.203565] [drm] Initialized drm 1.1.0 20060810
[    9.287161] input: HP WMI hotkeys as /devices/virtual/input/input7
[    9.464043] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[    9.470749] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    9.471980] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.993079] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 706145
[   10.056015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   10.147704] [drm] radeon kernel modesetting enabled.
[   10.183560] [drm] initializing kernel modesetting (PALM 0x1002:0x9804 0x103C:0x3577).
[   10.183878] [drm] register mmio base: 0x90300000
[   10.184004] [drm] register mmio size: 262144
[   10.185209] ATOM BIOS: HP
[   10.185469] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   10.185708] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   10.185852] [drm] Detected VRAM RAM=384M, BAR=256M
[   10.185919] [drm] RAM width 32bits DDR
[   10.186465] [TTM] Zone  kernel: Available graphics memory: 824230 kiB
[   10.186574] [TTM] Initializing pool allocator
[   10.186656] [TTM] Initializing DMA pool allocator
[   10.186811] [drm] radeon: 384M of VRAM memory ready
[   10.186923] [drm] radeon: 1024M of GTT memory ready.
[   10.187042] [drm] Loading PALM Microcode
[   10.200299] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   10.225055] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   10.238667] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   10.238933] [drm] Internal thermal controller without fan control
[   10.239175] [drm] Found smc ucode version: 0x00010200
[   10.239565] [drm] radeon: dpm initialized
[   10.267045] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   10.267777] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   10.296000] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   10.296528] radeon 0000:00:01.0: WB enabled
[   10.296655] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880062947c00
[   10.296739] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff880062947c0c
[   10.297821] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900046b2118
[   10.297946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.298009] [drm] Driver supports precise vblank timestamp query.
[   10.298122] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[   10.298153] radeon 0000:00:01.0: radeon: using MSI.
[   10.298329] [drm] radeon: irq initialized.
[   10.315203] [drm] ring test on 0 succeeded in 1 usecs
[   10.315416] [drm] ring test on 3 succeeded in 1 usecs
[   10.371332] [drm] ring test on 5 succeeded in 1 usecs
[   10.391488] [drm] UVD initialized successfully.
[   10.392018] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.392207] [drm] ib test on ring 3 succeeded in 0 usecs
[   10.413253] [drm] ib test on ring 5 succeeded
[   10.434416] [drm] Radeon Display Connectors
[   10.434479] [drm] Connector 0:
[   10.434537] [drm]   HDMI-A-1
[   10.434594] [drm]   HPD2
[   10.434652] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   10.434726] [drm]   Encoders:
[   10.434783] [drm]     DFP1: INTERNAL_UNIPHY
[   10.434842] [drm] Connector 1:
[   10.434898] [drm]   VGA-1
[   10.434956] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   10.435028] [drm]   Encoders:
[   10.435084] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.530757] [drm] fb mappable at 0x80477000
[   10.530888] [drm] vram apper at 0x80000000
[   10.530950] [drm] size 5242880
[   10.531009] [drm] fb depth is 24
[   10.531068] [drm]    pitch is 5120
[   10.531666] fbcon: radeondrmfb (fb0) is primary device
[   10.584524] Console: switching to colour frame buffer device 160x64
[   10.599442] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   10.599565] radeon 0000:00:01.0: registered panic notifier
[   10.601913] [drm:radeon_acpi_init] *ERROR* Cannot find a backlight controller
[   10.602224] [drm] Initialized radeon 2.37.0 20080528 for 0000:00:01.0 on minor 0
[   11.061581] hidraw: raw HID events driver (C) Jiri Kosina
[   11.104115] usbcore: registered new interface driver usbhid
[   11.104248] usbhid: USB HID core driver
[   11.162326] media: Linux media interface: v0.10
[   11.173190] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00F6.0001/input/input11
[   11.173873] hid-generic 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:12.0-2/input0
[   11.218091] Linux video capture interface: v2.00
[   11.384896] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b293)
[   11.401280] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input12
[   11.401974] usbcore: registered new interface driver uvcvideo
[   11.402109] USB Video Class driver (1.1.1)
[   11.431105] cfg80211: Calling CRDA to update world regulatory domain
[   11.712816] usbcore: registered new interface driver cdc_ether
[   11.797682] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-0000:00:12.2-1, RNDIS device, 3e:9c:c7:6a:48:46
[   11.797998] usbcore: registered new interface driver rndis_host
[   11.867162] usbcore: registered new interface driver rndis_wlan
[   12.267578] cfg80211: World regulatory domain updated:
[   12.267708] cfg80211:  DFS Master region: unset
[   12.267796] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.267958] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.268098] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.268236] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   12.268374] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   12.268511] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   12.268648] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   13.933651] Adding 3362812k swap on /dev/sda5.  Priority:-1 extents:1 across:3362812k 
[   13.995849] EXT4-fs (sda1): re-mounted. Opts: (null)
[   14.356973] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.177234] fuse init (API version 7.22)
[   15.256867] loop: module loaded
[   15.404066] lib80211: common routines for IEEE802.11 drivers
[   15.410665] lib80211_crypt: registered algorithm 'NULL'
[   27.225341] Bluetooth: Core ver 2.18
[   27.226707] NET: Registered protocol family 31
[   27.226822] Bluetooth: HCI device and connection manager initialized
[   27.226966] Bluetooth: HCI socket layer initialized
[   27.227067] Bluetooth: L2CAP socket layer initialized
[   27.227212] Bluetooth: SCO socket layer initialized
[   28.118996] Netfilter messages via NETLINK v0.30.
[   31.460235] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8105e-1.fw
[   31.662822] r8169 0000:06:00.0 eth0: link down
[   31.663033] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.826182] postgres (2924): /proc/2924/oom_adj is deprecated, please use /proc/2924/oom_score_adj instead
 
Old 08-08-2014, 05:06 AM   #7
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
It's showing driver loaded
Since kali doesn't automatically start network, try
Quote:
ifup wlan0
also
Quote:
iwlist scanning
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Wireless card compatible with Fedora 16. ds9sisko Linux - Laptop and Netbook 1 03-20-2012 08:39 PM
which PCMCIA wireless card most compatible? gychang Linux - Hardware 1 01-27-2009 03:52 PM
Compatible wireless PC card for laptop? shamusfu Linux - Wireless Networking 2 10-20-2008 10:41 PM
Is my wireless PCI card compatible? New2Linuxalso Linux - Hardware 3 03-11-2008 06:02 PM
Best wireless card? Any compatible N cards? zephyrcat Linux - Hardware 4 03-08-2008 04:12 PM


All times are GMT -5. The time now is 04:02 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration