Where could I get help?
 

Can anyone suggest another forum I could go to?

I asked for help here but was not lucky (link below).

http://www.linuxquestions.org/questi...52#post4230452

Well I don't see any better place than here. (plenty of guru far better than me around here)

What is the output of your lspci?

Something is looking weird:

Thanks for your help.

lspci -v:
-----------------
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [80] Power Management version 2
Kernel modules: shpchp

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: D-Link System Inc DFE-538TX
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at a400 [size=256]
Memory at de800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

00:0b.0 Ethernet controller: Device 00ec:8139 (rev 10)
Subsystem: Device 0186:1300
Flags: bus master, medium devsel, latency 32, IRQ 255
I/O ports at 1000 [disabled] [size=256]
Memory at de000000 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: [50] Power Management version 2

Huuuummmm, your second network car look really strange to me... and the IRQ 255.... huuuummmm

Can you please tell me what it is (brand / model) and if you seem it already working on an other computer / OS?

I would check as well it compatibility with Linux.

Angel.

Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread is being closed because it is a duplicate.


http://www.linuxquestions.org/questi...8/#post4230452