VL 6.0 STD installed.. but hangs on boot

ic_torres · 02-07-2011, 06:11 AM

i have succesfully installed VL6.0 on my desktop (together with other and recently used 5.8 and Sw12.0) install successful but upon booting (i have included 6.0 in my 5.8's lilo) it just stops on a point where in it says:

VFS: Mounting /dev/hdc12 read only.. etc..
"Freeing unused kernel memory..212k freed"

i am not sure if this is a mem failure (though all of my linux boxes runs properly)

i have re-installed it.. encountered the same. .

as i have checked my SW12.0's dmesg, same line appears but it boots..

Quote:

Code:
ReiserFS: hdc5: checking transaction log (hdc5)
ReiserFS: hdc5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 392k freed
Linux agpgart interface v0.102 (c) Dave Jones
intel_rng: FWH not detected
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
agpgart: Detected an Intel i845 Chipset.

and my ISO image is good as per the md5sum. . .

details :

1. installed successfully
2. LILO installed in boot record of /dev/hdc12 --where 6.0 is installed
3. added 6.0 in my current LILO (VL 5.8)
4. ALL BOXES (sw12.0, vl5.8, zw4.6.1) are loading except VL6.0

bigrigdriver · 02-08-2011, 08:40 PM

I suggest you boot one of the other distros. Then mount the VL partition and inspect the logs in /var/log. You might find useful information there.

ic_torres · 02-09-2011, 06:24 AM

ok another update:

result of fsck:

Quote:

root@slackerz:~# fsck -a -V /dev/hdc12
fsck 1.39 (29-May-2006)
[/sbin/fsck.reiserfs (1) -- /dev/hdc12] fsck.reiserfs -a /dev/hdc12
Reiserfs super block in block 16 on 0x160c of format 3.6 with standard journal
Blocks (total/free): 3662056/2771359 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdc12' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
root@slackerz:~#

varlog and syslog file empty. .

dmesg :

Quote:

Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2) #2 SMP Tue Jun 19 14:58:11 CDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3
copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb970
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000FA750, 0014 (r0 AMI )
ACPI: RSDT 3FFF0000, 002C (r1 AMIINT INTEL845 10 MSFT 97)
ACPI: FACP 3FFF0030, 0081 (r1 AMIINT INTEL845 11 MSFT 97)
ACPI: DSDT 3FFF0120, 35CF (r1 INTEL BROKDALE 1000 MSFT 100000D)
ACPI: FACS 3FFF8000, 0040
ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT INTEL845 9 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists. Total pages: 260081
Kernel command line: auto BOOT_IMAGE=Slackware_12 ro root=1605
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1804.236 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029612k/1048512k available (6215k kernel code, 18296k reserved, 2017k data, 392k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0915000 - 0xc0977000 ( 392 kB)
.data : 0xc0711c79 - 0xc090a38c (2017 kB)
.text : 0xc0100000 - 0xc0711c79 (6215 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3611.97 BogoMIPS (lpj=7223946)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 03
Total of 1 processors activated (3611.97 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0400-043f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ieee1394: Initialized config rom entry `ip1394'
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ddd00000-dfdfffff
PREFETCH window: cdc00000-ddbfffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 8045, nTxLock = 64366
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jun 19 2007 14:57:33) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 1536k, total 65536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:c1a0
vesafb: pmi: set display start = c00cc1e5, set palette = c00cc26a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Switched to high resolution mode on CPU 0
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda

MA, hdb

io
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc

MA, hdd

MA
Probing IDE interface ide0...
hda: Maxtor 2F040L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD800BB-00JHC0, ATA DISK drive
hdd: ATAPI DVD A DH20A4P, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdc: max request size: 128KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 >
hdc1: <openbsd: hdc14 hdc15 hdc16 hdc17 hdc18 hdc19bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
bad subpartition - ignored
>
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:03:06.2[C] -> GSI 18 (level, low) -> IRQ 16
ehci_hcd 0000:03:06.2: EHCI Host Controller
ehci_hcd 0000:03:06.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:03:06.2: irq 16, io mem 0xdfeefe00
ehci_hcd 0000:03:06.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 16 (level, low) -> IRQ 18
uhci_hcd 0000:03:06.0: UHCI Host Controller
uhci_hcd 0000:03:06.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:03:06.0: irq 18, io base 0x0000c000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:03:06.1[B] -> GSI 17 (level, low) -> IRQ 19
uhci_hcd 0000:03:06.1: UHCI Host Controller
uhci_hcd 0000:03:06.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:03:06.1: irq 19, io base 0x0000c400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 452 MB/s
raid6: int32x2 492 MB/s
raid6: int32x4 498 MB/s
raid6: int32x8 347 MB/s
raid6: mmxx1 1467 MB/s
raid6: mmxx2 1888 MB/s
raid6: sse1x1 858 MB/s
raid6: sse1x2 1632 MB/s
raid6: sse2x1 1693 MB/s
raid6: sse2x2 2037 MB/s
raid6: using algorithm sse2x2 (2037 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2394.000 MB/sec
raid5: using function: pIII_sse (2394.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hdc5: found reiserfs format "3.6" with standard journal
ReiserFS: hdc5: using ordered data mode
ReiserFS: hdc5: journal params: device hdc5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc5: checking transaction log (hdc5)
input: AT Translated Set 2 keyboard as /class/input/input1
ReiserFS: hdc5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 392k freed
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
intel8x0_measure_ac97_clock: measured 55939 usecs
intel8x0: clocking to 48000
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 22 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xc800, 00:07:95:33:c1:b4, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Adding 976712k swap on /dev/hdc7. Priority:-1 extents:1 across:976712k
input: PC Speaker as /class/input/input2
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
Capability LSM initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdc8: found reiserfs format "3.6" with standard journal
ReiserFS: hdc8: using ordered data mode
ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc8: checking transaction log (hdc8)
ReiserFS: hdc8: Using r5 hash to sort names
ReiserFS: hdc9: found reiserfs format "3.6" with standard journal
ReiserFS: hdc9: using ordered data mode
ReiserFS: hdc9: journal params: device hdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc9: checking transaction log (hdc9)
ReiserFS: hdc9: Using r5 hash to sort names
ReiserFS: hdc10: found reiserfs format "3.6" with standard journal
ReiserFS: hdc10: using ordered data mode
ReiserFS: hdc10: journal params: device hdc10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc10: checking transaction log (hdc10)
ReiserFS: hdc10: Using r5 hash to sort names
ReiserFS: hdc11: found reiserfs format "3.6" with standard journal
ReiserFS: hdc11: using ordered data mode
ReiserFS: hdc11: journal params: device hdc11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc11: checking transaction log (hdc11)
ReiserFS: hdc11: Using r5 hash to sort names
fuse init (API version 7.8)
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8191 buckets, 65528 max)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
PPP BSD Compression module registered
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
eth0: no IPv6 routers present
ReiserFS: hdc12: found reiserfs format "3.6" with standard journal
ReiserFS: hdc12: using ordered data mode
ReiserFS: hdc12: journal params: device hdc12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc12: checking transaction log (hdc12)
ReiserFS: hdc12: Using r5 hash to sort names
IN=ppp0 OUT= MAC= SRC=70.25.101.27 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=10181 DF PROTO=TCP SPT=1908 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=70.25.101.27 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=11484 DF PROTO=TCP SPT=1908 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=70.25.101.27 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=14201 DF PROTO=TCP SPT=1908 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=217.75.56.130 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=63868 DF PROTO=TCP SPT=2143 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=217.75.56.130 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=64176 DF PROTO=TCP SPT=2143 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=178.95.168.82 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=26659 DF PROTO=TCP SPT=2409 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=178.95.168.82 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=26808 DF PROTO=TCP SPT=2409 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=178.95.168.82 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=26875 DF PROTO=TCP SPT=2429 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=8080 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=8000 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=8888 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=808 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=8118 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=3128 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=109.230.251.9 DST=110.55.43.233 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=256 DF PROTO=TCP SPT=12200 DPT=8085 WINDOW=8192 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=217.75.56.130 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=12897 DF PROTO=TCP SPT=3212 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=217.75.56.130 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=113 ID=13187 DF PROTO=TCP SPT=3212 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=200.161.215.174 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=56209 DF PROTO=TCP SPT=3240 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=200.161.215.174 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=56491 DF PROTO=TCP SPT=3240 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
ReiserFS: hdc12: found reiserfs format "3.6" with standard journal
ReiserFS: hdc12: using ordered data mode
ReiserFS: hdc12: journal params: device hdc12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc12: checking transaction log (hdc12)
ReiserFS: hdc12: Using r5 hash to sort names
IN=ppp0 OUT= MAC= SRC=119.152.52.51 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=3997 DF PROTO=TCP SPT=2820 DPT=36492 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=119.152.52.51 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=4439 DF PROTO=TCP SPT=2820 DPT=36492 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=119.152.52.51 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=12044 DF PROTO=TCP SPT=2982 DPT=36492 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=119.152.52.51 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=12141 DF PROTO=TCP SPT=2982 DPT=36492 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=119.152.52.51 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=12214 DF PROTO=TCP SPT=2982 DPT=36492 WINDOW=16384 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=79.3.149.35 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=62236 DF PROTO=TCP SPT=2938 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
IN=ppp0 OUT= MAC= SRC=79.3.149.35 DST=110.55.43.233 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=62485 DF PROTO=TCP SPT=2938 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0