LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 02-16-2006, 08:16 AM   #1
Carez
LQ Newbie
 
Registered: Jan 2006
Location: Somewhere...
Distribution: Debian
Posts: 8

Rep: Reputation: 0
usb2 not recognised


I've a problem with usb 2.0, it isn't shown in fdisk -l or usbview and I can't mount it as well... when I use usb 1.0 there is no problem. Can someone help me?

Thanks in advance
 
Old 02-16-2006, 12:05 PM   #2
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
Not enough information provided nor do I exactly understand the problem.

What linux distrubtion / version are you running?
What do you mean by USB 2 not recognized.
What do you mean by when you use USB 2.0 vs USB 1.0, modules, devices?
What are you trying to mount?
What are the hardware specs of the computer?

Post the output of lspci?
post the output of lsmod
 
Old 02-16-2006, 01:07 PM   #3
Carez
LQ Newbie
 
Registered: Jan 2006
Location: Somewhere...
Distribution: Debian
Posts: 8

Original Poster
Rep: Reputation: 0
distribution is Debian 3.0, kernel 2.6
and I mean that I can't mount a usb 2.0 device; but if I try to mount a usb1 device, there is no problem

lspci
Code:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200SE] (rev 01)
lsmod
Code:
Module                  Size  Used by
nls_cp437               6016  1
ntfs                   88788  1
radeon                113956  2
ipv6                  229892  8
af_packet              20872  2
floppy                 54992  0
analog                 10784  0
parport_pc             33348  0
parport                37320  1 parport_pc
pcspkr                  3816  0
rtc                    12088  0
ehci_hcd               27908  0
snd_intel8x0           33068  0
snd_ac97_codec         59268  1 snd_intel8x0
snd_pcm                85384  1 snd_intel8x0
snd_timer              23300  1 snd_pcm
snd_page_alloc         11144  2 snd_intel8x0,snd_pcm
gameport                4736  2 analog,snd_intel8x0
snd_mpu401_uart         7296  1 snd_intel8x0
snd_rawmidi            23204  1 snd_mpu401_uart
snd_seq_device          7944  1 snd_rawmidi
snd                    50660  7 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
shpchp                 87148  0
pciehp                 83948  0
pci_hotplug            30640  2 shpchp,pciehp
tsdev                   7168  0
mousedev                9996  1
joydev                  9536  0
evdev                   9088  0
sis_agp                 8068  1
agpgart                31784  2 sis_agp
usbhid                 28864  0
usb_storage            59328  0
usblp                  12032  0
ohci_hcd               19460  0
usbcore               104164  7 ehci_hcd,usbhid,usb_storage,usblp,ohci_hcd
i810_audio             33300  0
ac97_codec             16908  1 i810_audio
soundcore               9824  2 snd,i810_audio
sis900                 18436  0
capability              4872  0
commoncap               7168  1 capability
sd_mod                 20480  0
scsi_mod              115148  2 usb_storage,sd_mod
psmouse                17800  0
ide_cd                 38176  0
cdrom                  35740  1 ide_cd
ext3                  109544  0
jbd                    54552  1 ext3
ide_generic             1664  0
sis5513                15240  1
ide_disk               16768  4
ide_core              125028  5 usb_storage,ide_cd,ide_generic,sis5513,ide_disk
unix                   26036  264
font                    8576  0
vesafb                  6688  0
cfbcopyarea             3840  1 vesafb
cfbimgblt               3200  1 vesafb
cfbfillrect             3712  1 vesafb

i hope you understand me better now
 
Old 02-16-2006, 02:08 PM   #4
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
Are you plugging the USB 2 device into a USB 2.0 controller?
Also check the output of the dmesg command for errors when mounting the USB 2.0 device
 
Old 02-16-2006, 03:40 PM   #5
Carez
LQ Newbie
 
Registered: Jan 2006
Location: Somewhere...
Distribution: Debian
Posts: 8

Original Poster
Rep: Reputation: 0
I'm plugging the usb device into the right controler, I managed to mount the device 4 days ago, but somehow this doesn't work anymore... when I check dmesg:

Code:
=0)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7b20
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x67fb, dseg 0xf0000
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    D9
 11 001 01  1    1    0   1   0    1    1    A9
 12 001 01  1    1    0   1   0    1    1    B1
 13 001 01  1    1    0   1   0    1    1    D1
 14 001 01  1    1    0   1   0    1    1    B9
 15 001 01  1    1    0   1   0    1    1    C1
 16 000 00  1    0    0   0   0    0    0    00
 17 001 01  1    1    0   1   0    1    1    C9
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ217 -> 0:16
IRQ169 -> 0:17
IRQ177 -> 0:18
IRQ209 -> 0:19
IRQ185 -> 0:20
IRQ193 -> 0:21
IRQ201 -> 0:23
.................................... done.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4216 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP1604N, ATA DISK drive
hdb: ST3200822A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 >
hdc: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ext3: No journal on filesystem on hdb5
Adding 1044216k swap on /dev/hdb2.  Priority:-1 extents:1
hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
SCSI subsystem initialized
Capability LSM initialized
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 209
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 209, 00:0b:6a:4d:11:b0.
Intel 810 + AC97 Audio, version 1.01, 13:08:13 Aug 16 2005
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
i810: SiS 7012 found at IO 0xd800 and 0xdc00, MEM 0x0000 and 0x0000, IRQ 177
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97  codec, id: CMI130 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 185, pci mem f882c000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 193, pci mem f8845000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-2: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0014
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 1-3: new full speed USB device using address 3
usb 2-2: new low speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: IC        Model: USB Storage-CFC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb 2-3: new full speed USB device using address 3
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: IC        Model: USB Storage-SMC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
  Vendor: IC        Model: USB Storage-MMC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
  Vendor: IC        Model: USB Storage-MSC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:03.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: USB 2.0   Model: Memory Adapter    Rev:
  Type:   Direct-Access                      ANSI SCSI revision: 02
Linux agpgart interface v0.100 (c) Dave Jones
SCSI device sde: 251904 512-byte hdwr sectors (129 MB)
sde: assuming Write Enabled
sde: assuming drive cache: write through
mice: PS/2 mouse device common for all mice
 /dev/scsi/host1/bus0/target0/lun0: p4
Attached scsi removable disk sde at scsi1, channel 0, id 0, lun 0
agpgart: Detected SiS 746 chipset
agpgart: Maximum main memory to use for agp memory: 816M
USB Mass Storage device found at 3
agpgart: AGP aperture is 128M @ 0xd0000000
ts: Compaq touchscreen protocol output
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 201
ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.2: irq 201, pci mem f89fb000
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 2-2: USB disconnect, address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 2-3: USB disconnect, address 3
usb 1-2: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: removed
usb 1-3: USB disconnect, address 3
ohci_hcd 0000:00:03.0: wakeup
ohci_hcd 0000:00:03.1: wakeup
usb 3-6: new high speed USB device using address 5
usb 3-6: device not accepting address 5, error -32
usb 3-6: new high speed USB device using address 6
usb 3-6: device not accepting address 6, error -32
usb 1-2: new full speed USB device using address 4
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x0014
usb 1-3: new full speed USB device using address 5
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: IC        Model: USB Storage-CFC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
  Vendor: IC        Model: USB Storage-SMC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
  Vendor: IC        Model: USB Storage-MMC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
  Vendor: IC        Model: USB Storage-MSC   Rev: 301b
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
USB Mass Storage device found at 5
usb 2-2: new low speed USB device using address 4
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:03.1-2
Real Time Clock Driver v1.12
input: PC Speaker
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
eth0: Media Link On 100mbps half-duplex
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280[Radeon 9200 SE]
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode
eth0: no IPv6 routers present
usb 2-3: new full speed USB device using address 5
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor:           Model:                   Rev:
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sde: 503521 512-byte hdwr sectors (258 MB)
sde: assuming Write Enabled
sde: assuming drive cache: write through
 /dev/scsi/host3/bus0/target0/lun0: unknown partition table
Attached scsi removable disk sde at scsi3, channel 0, id 0, lun 0
USB Mass Storage device found at 5
cdrom: open failed.
NTFS driver 2.1.15 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
usb 2-3: USB disconnect, address 5
usb 3-6: new high speed USB device using address 8
usb 3-6: device not accepting address 8, error -32
usb 3-6: new high speed USB device using address 9
usb 3-6: device not accepting address 9, error -32
usb 2-2: USB disconnect, address 4
usb 3-4: new high speed USB device using address 10
usb 3-4: device not accepting address 10, error -32
usb 3-4: new high speed USB device using address 11
usb 3-4: device not accepting address 11, error -32
ohci_hcd 0000:00:03.1: wakeup
usb 2-2: new low speed USB device using address 6
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:03.1-2
usb 3-2: new high speed USB device using address 13
usb 3-2: device not accepting address 13, error -32
usb 3-2: new high speed USB device using address 14
usb 3-2: device not accepting address 14, error -32
usb 3-6: new high speed USB device using address 15
usb 3-6: device not accepting address 15, error -32
usb 3-6: new high speed USB device using address 16
usb 3-6: device not accepting address 16, error -32
hmh, there are some errors, but i don't know what they mean...my usb controller is sde, when i try to mount the usb device, i get the message,that the special device /dev/sde doesn't exist
 
Old 02-16-2006, 06:04 PM   #6
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
What is the make/model of the storage device you are trying to mount.
 
Old 02-17-2006, 08:27 AM   #7
Carez
LQ Newbie
 
Registered: Jan 2006
Location: Somewhere...
Distribution: Debian
Posts: 8

Original Poster
Rep: Reputation: 0
Typhoon Usb 2.0 Memory Adapter
128Mb
 
Old 02-17-2006, 08:37 AM   #8
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
So you are saying that when you plug the memory adapter into a USB 1.0 port it works ok?
 
Old 02-17-2006, 10:26 AM   #9
Carez
LQ Newbie
 
Registered: Jan 2006
Location: Somewhere...
Distribution: Debian
Posts: 8

Original Poster
Rep: Reputation: 0
no...when i plug in a usb 1 device it works. but I know the controller supports usb 2.0
 
Old 02-17-2006, 10:57 AM   #10
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
Lets start over and lets be more specific. It appears that you have more then one USB device. A mouse, memory stick and printer. You also have more then one USB controller, 2 USB 1.0s and a 2.0 controller. /dev/sde is refering to the memory stick and not the controller.

Lets just deal with the memory stick. Even though the memory stick is a USB 2 device it should also be downward compatable with a 1.0 controller. I want you to try the memory stick in the different ports to see if it might be a USB 2 module problem. Since it used to work have you changed anything lately? If you have not changed configuration settings or adding software etc the memory stick might be corrupted or went bad. Trying the stick in another PC or with windows if you duel boot would be good to verify it is a linux problem.

Last edited by michaelk; 02-17-2006 at 11:22 AM.
 
Old 02-17-2006, 11:08 AM   #11
michaelk
Moderator
 
Registered: Aug 2002
Posts: 14,929

Rep: Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520Reputation: 1520
I also see references in dmesg to sda, sdb, sdc and sdd. Do you have other USB hard drives or is this a memory reader?

Last edited by michaelk; 02-17-2006 at 11:20 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
modem not recognised Greebstreebling Linux - Hardware 2 12-15-2005 10:17 AM
Only IP numbers recognised neilcpp Linux - Networking 2 08-26-2005 02:56 PM
CDROM not being recognised JonnyL Linux - Hardware 2 05-15-2004 04:18 PM
usb2 pci card not recognised seanfitz Linux - Hardware 1 04-07-2004 10:20 AM
Modem not recognised andyn1983 Linux - Newbie 3 10-31-2003 02:24 PM


All times are GMT -5. The time now is 03:01 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration