LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   usb to serial converter not working for 115200 baud rate but good for 9600 (https://www.linuxquestions.org/questions/linux-newbie-8/usb-to-serial-converter-not-working-for-115200-baud-rate-but-good-for-9600-a-840252/)

sumeet inani 10-25-2010 01:23 AM

usb to serial converter not working for 115200 baud rate but good for 9600
 
I am using openSUSE 11.3 , 32bit.
I do the appropriate setting in 'minicom' application.
I have two devices 'a' giving message at debug port at 9600 baud while 'b' at 115200 baud
Both 'a' & 'b' work fine when connected to serial port of computer.
'a' works well if I connect it to serial to USB adapter which is plugged into USB port of computer.
In case of 'b' , the above method yields failure.

Do I have to set anything for device /dev/ttyUSB0 ?

prayag_pjs 10-25-2010 02:18 AM

Hi,

At times /dev/ttyUSB0 switches to /dev/ttyUSB1. Check that

Also confirm that for both 9600 and 115200 baud rate you have different saved configuration


All times are GMT -5. The time now is 10:35 AM.