Hi All!!!!
I am new in Redhat linux and i want to access internet through My USB-Modem(ZTE-K3570) someone told me " wvdialconf " best way to configure USB-Modem but still i am facing error error so kindly help and give me the solution.
i configured USB-Modem like this:-
---------------------------------------------------
[root@server ~]# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 19d2:1007 ONDA Communication S.p.A.
Bus 001 Device 001: ID 0000:0000
[root@server ~]# modprobe usbserial vendor=0x19d2 product=0x1007
[root@server ~]# echo $?
0
[root@server ~]# wvdialconf create
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at
http://open.nit.ca/wvdial/
If you still have problems, send mail to
wvdial-list@lists.nit.ca.
----------------------------------------------------
although the USB-MODEM device already connected on com port.but it is still showing " Sorry, no modem was detected! "
so please help
i'll be thankful to yours
