LinuxQuestions.org
Did you know LQ has a Linux Hardware Compatibility List?
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 05-20-2004, 05:14 AM   #1
koy
Member
 
Registered: Apr 2003
Distribution: SuSe 10
Posts: 55

Rep: Reputation: 15
USB hdd mount n2


Well as the other thread went under i'll open a new one

So here's my newer problem, this time when I plugin my archos mp3 player (which is actually a portable hdd) I get this in /var/log/messages:

Code:
May 20 11:06:08 linux kernel: usb 2-3: new full speed USB device using address 3
May 20 11:06:08 linux kernel: usb 2-3: Product: USB Storage Adapter
May 20 11:06:08 linux kernel: usb 2-3: Manufacturer: In-System Design
May 20 11:06:08 linux kernel: usb 2-3: SerialNumber: 48E020BBE3E2FF8D
May 20 11:06:08 linux /etc/hotplug/usb.agent[5019]: need a device for this command
May 20 11:06:14 linux kernel: Initializing USB Mass Storage driver...
May 20 11:06:14 linux kernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 20 11:06:14 linux kernel:   Vendor: HITACHI_  Model: DK23DA-20         Rev: 00J2
May 20 11:06:14 linux kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
May 20 11:06:14 linux kernel: SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
May 20 11:06:14 linux kernel: sda: assuming drive cache: write through
May 20 11:06:14 linux /etc/hotplug/block.agent[5103]: try 1 while waiting for /block/sda's bus_id 0:0:0:0
May 20 11:06:14 linux kernel:  sda:SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:14 linux kernel: end_request: I/O error, dev sda, sector 0
May 20 11:06:14 linux kernel: Buffer I/O error on device sda, logical block 0
May 20 11:06:14 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:14 linux kernel: end_request: I/O error, dev sda, sector 0
May 20 11:06:14 linux kernel: Buffer I/O error on device sda, logical block 0
May 20 11:06:14 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:14 linux kernel: end_request: I/O error, dev sda, sector 39070072
May 20 11:06:14 linux kernel: Buffer I/O error on device sda, logical block 4883759
May 20 11:06:14 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:14 linux kernel: end_request: I/O error, dev sda, sector 39070072
May 20 11:06:14 linux kernel: Buffer I/O error on device sda, logical block 4883759
May 20 11:06:14 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:14 linux kernel: end_request: I/O error, dev sda, sector 0
May 20 11:06:14 linux kernel: Buffer I/O error on device sda, logical block 0
May 20 11:06:14 linux kernel: ldm_validate_partition_table(): Disk read failed.
May 20 11:06:15 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:15 linux kernel: end_request: I/O error, dev sda, sector 0
May 20 11:06:15 linux /etc/hotplug/block.agent[5103]: try 2 while waiting for /block/sda's bus_id 0:0:0:0
May 20 11:06:15 linux kernel: SCSI error : <0 0 0 0> return code = 0x70000
May 20 11:06:15 linux kernel: end_request: I/O error, dev sda, sector 0
May 20 11:06:15 linux kernel: Buffer I/O error on device sda, logical block 0
May 20 11:06:15 linux kernel:  unable to read partition table
May 20 11:06:15 linux kernel:  unable to read partition table
May 20 11:06:15 linux kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
May 20 11:06:15 linux kernel: USB Mass Storage device found at 3
May 20 11:06:15 linux kernel: drivers/usb/core/usb.c: registered new driver usb-storage
May 20 11:06:15 linux kernel: USB Mass Storage support registered.
May 20 11:06:15 linux kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
May 20 11:06:16 linux /etc/hotplug/block.agent[5103]: new block device /block/sda
and then I get that scsi I/O error a few more times...

if I try and mount it it says, "can't read superblock"; but it works perfectly in windows...
 
Old 10-03-2004, 07:06 AM   #2
cneal
LQ Newbie
 
Registered: Aug 2003
Posts: 14

Rep: Reputation: 0
Me too!

Hi, I get exactly the same problem with my digital camera. It's a Panasonic Lumix LC-40, with SD card storage connected to my laptop via USB cable.

Same (or very similar) error messages too, and it work in Windows. I couldn't swear to it but I'm pretty sure this used to work on earlier versions of SuSE Linux Professional: perhaps its something to do with the 2.6 kernel or usblib?

Anyway, I'll keep Googling for answers and will post whatever I find out: let me know if you get a resolution?

Chris
 
Old 10-03-2004, 12:48 PM   #3
koy
Member
 
Registered: Apr 2003
Distribution: SuSe 10
Posts: 55

Original Poster
Rep: Reputation: 15
Re: Me too!

Quote:
Originally posted by cneal
Hi, I get exactly the same problem with my digital camera. It's a Panasonic Lumix LC-40, with SD card storage connected to my laptop via USB cable.

Same (or very similar) error messages too, and it work in Windows. I couldn't swear to it but I'm pretty sure this used to work on earlier versions of SuSE Linux Professional: perhaps its something to do with the 2.6 kernel or usblib?

Anyway, I'll keep Googling for answers and will post whatever I find out: let me know if you get a resolution?

Chris
ye well i got rid of that mp3 player, and bought myself a new iPOD, (which doesn't work either lol)

But if you search around the forum there's a thread bout the new generation ipod not working under linux, so I guess all devices have the same problem.

So I guess the only way round it would be to wait for some sort of new usb driver or smth.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
booting from usb hdd -> mount: error 6 mounting reiserfs shlape Linux - Hardware 0 09-22-2005 07:40 PM
Install directly to HDD from iso on HDD/USB, with out burning cd vivinuthappa DamnSmallLinux 7 11-16-2004 11:03 AM
How to format & mount 2nd hdd after FedCor1 has been installed on 1st hdd? clay394 Fedora 1 05-18-2004 02:50 PM
mount a usb hdd in R/W mode asterix Linux - General 3 10-14-2003 11:57 AM
mount usb module then mount usb hard drive guanyu Linux - Hardware 1 10-08-2003 12:50 PM


All times are GMT -5. The time now is 05:13 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration