LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices



Reply
 
Search this Thread
Old 11-24-2005, 03:27 PM   #1
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Rep: Reputation: 0
unable to mount external dvd


I have just installed Mandriva a few weeks ago. I usually burn dvd's with my external dvd drive connected via usb2. Until now I have no problems connecting the drive since automount took care of that. But now I can't even see it in drakconf under hardware. I am using a laptop with a Samsung cdrom drive which works fine. I've searched the forum and most people are asked to post the output from dmseg. If that is needed please tell me what's relevant since it is 44K size.
 
Old 11-24-2005, 04:13 PM   #2
microsoft/linux
Senior Member
 
Registered: May 2004
Location: Sebec, ME, USA
Distribution: Debian Etch, Windows XP Home, FreeBSD
Posts: 1,445
Blog Entries: 9

Rep: Reputation: 45
The DVD drive was auto-detected up until now? Did anything change? the output from dmesg would be useful. What happens when you plug in your DVD drive?(i.e. in the USB port). Open up a command line and watch the output, post that here as well.
 
Old 11-24-2005, 04:38 PM   #3
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
Here is the output from dmesg. Remember, it is not the Samsung drive that is the dvd drive.

Code:
Linux version 2.6.12-12mdk-i686-up-4GB (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 17:59:21 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffae000 (usable)
 BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130990
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126894 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000fdf00
ACPI: RSDT (v001 DELL    CPi R   0x27d30701 ASL  0x00000061) @ 0x1fff0000
ACPI: FADT (v001 DELL    CPi R   0x27d30701 ASL  0x00000061) @ 0x1fff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Built 1 zonelists
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01401000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux root=301 resume=/dev/hda5 splash=silent
bootsplash: silent mode.
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1299.155 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514584k/523960k available (2341k kernel code, 8828k reserved, 716k data, 264k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2572.28 BogoMIPS (lpj=1286144)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 165k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x800-0x805 could not be reserved
pnp: 00:01: ioport range 0x808-0x80f could not be reserved
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:02: ioport range 0x806-0x807 has been reserved
pnp: 00:02: ioport range 0x810-0x85f could not be reserved
pnp: 00:02: ioport range 0x860-0x87f has been reserved
pnp: 00:02: ioport range 0x880-0x8bf has been reserved
pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
pnp: 00:07: ioport range 0x900-0x97f has been reserved
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1132860948.524:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 3750k, total 32704k
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: protected mode interface info at c000:5769
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3).
Console: switching to colour frame buffer device 93x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2030AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CDRW/DVD SN-324F, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard on isa0060/serio0
swsusp: Suspend partition has wrong signature?
ACPI wakeup devices: 
 LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE 
ACPI: (supports S0 S1 S3 S4 S4bios S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 264k freed
input: PS/2 Mouse on isa0060/serio1
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ts: Compaq touchscreen protocol output
EXT3 FS on hda1, internal journal
Adding 1124508k swap on /dev/hda5.  Priority:-1 extents:1
i8k: unable to get SMM Dell signature
i8k: unable to get SMM BIOS version
Non-volatile memory driver v1.2
hw_random: cannot enable RNG, aborting
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 64M @ 0xf0000000
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[faffd800-faffdfff]  Max Packet=[2048]
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3).
bootsplash: status on console 0 changed to on
ip_conntrack version 2.1 (4093 buckets, 32744 max) - 260 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: AC Adapter [AC] (on-line)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[394fc0002360e810]
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (63 C)
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000006
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f
cs: IO port probe 0xa00-0xaff: clean.
floppy0: no floppy controllers found
floppy0: no floppy controllers found
NET: Registered protocol family 17
b44.c:v0.95 (Aug 3, 2004)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0d:56:32:55:69
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.1.2
ipw2100: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
spurious 8259A interrupt: IRQ7.
ieee80211_crypt: registered algorithm 'WEP'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4093 buckets, 32744 max) - 260 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50429 usecs
intel8x0: clocking to 48000
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=83.135.141.74 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=121 ID=65415 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c3740(lo)
IPv6 over IPv4 tunneling driver
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=75 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=55 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=75 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=55 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=75 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=55 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=75 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=55 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 9691136
[fglrx] max   LFB = 9691136
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
eth2: no IPv6 routers present
 
Old 11-24-2005, 04:39 PM   #4
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
Code:
removed

Last edited by bamsesbilledbog; 11-24-2005 at 04:57 PM.
 
Old 11-24-2005, 04:41 PM   #5
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
Code:
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=83.25.48.60 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0xA0 TTL=114 ID=62531 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=82.249.48.164 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=114 ID=7993 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=81.249.6.111 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=111 ID=46074 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=82.249.48.164 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=114 ID=8007 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=83.25.48.60 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0xA0 TTL=114 ID=62832 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=65.94.94.110 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=51 ID=15579 PROTO=UDP SPT=65535 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=81.249.6.111 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=111 ID=46479 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=81.249.6.111 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=111 ID=46662 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=82.249.48.164 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=114 ID=9275 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=84.52.149.41 DST=192.168.1.100 LEN=65 TOS=0x00 PREC=0x00 TTL=113 ID=3298 PROTO=UDP SPT=49153 DPT=6881 LEN=45 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=200.63.247.37 DST=192.168.1.100 LEN=65 TOS=0x00 PREC=0x00 TTL=110 ID=30352 PROTO=UDP SPT=6884 DPT=6881 LEN=45 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=86.3.254.10 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=110 ID=58351 PROTO=UDP SPT=14560 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=86.3.254.10 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=110 ID=59044 PROTO=UDP SPT=14560 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=70.110.164.39 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=50 ID=51552 PROTO=UDP SPT=6969 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=70.110.164.39 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=50 ID=52268 PROTO=UDP SPT=6969 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=70.110.164.39 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=50 ID=54429 PROTO=UDP SPT=6969 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=84.52.149.41 DST=192.168.1.100 LEN=65 TOS=0x00 PREC=0x00 TTL=113 ID=13645 PROTO=UDP SPT=49153 DPT=6881 LEN=45 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=200.63.247.37 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=110 ID=35941 PROTO=UDP SPT=6884 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=82.39.159.126 DST=192.168.1.100 LEN=65 TOS=0x00 PREC=0x00 TTL=112 ID=41129 PROTO=UDP SPT=50010 DPT=6881 LEN=45 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=83.138.210.196 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=113 ID=63060 PROTO=UDP SPT=6881 DPT=6881 LEN=66 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0d:56:32:55:69:00:a0:c5:60:2a:5e:08:00 SRC=83.138.210.196 DST=192.168.1.100 LEN=86 TOS=0x00 PREC=0x00 TTL=113 ID=63369 PROTO=UDP SPT=6881 DPT=6881 LEN=66
Sorry for the long post. But as I said, I don't know what to look for in dmesg.
 
Old 11-24-2005, 04:43 PM   #6
microsoft/linux
Senior Member
 
Registered: May 2004
Location: Sebec, ME, USA
Distribution: Debian Etch, Windows XP Home, FreeBSD
Posts: 1,445
Blog Entries: 9

Rep: Reputation: 45
Code:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
this is the relevant stuff(that I noticed), you can remove everything from your second post becuase that's all firewalling stuff. what happens when you plug it in?
 
Old 11-24-2005, 05:00 PM   #7
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
Well. I could normally see it in k3b or in the hardware section in drakconf. If I need to post some kind of output, please tell me what (and how).
 
Old 11-24-2005, 05:21 PM   #8
microsoft/linux
Senior Member
 
Registered: May 2004
Location: Sebec, ME, USA
Distribution: Debian Etch, Windows XP Home, FreeBSD
Posts: 1,445
Blog Entries: 9

Rep: Reputation: 45
open up a console, and then plug in the drive. Post the output from there. Can you still see it in k3b? Has anything changed on your system?
 
Old 11-24-2005, 05:32 PM   #9
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
There is no output in a console when I plug it in. I can't see it in k3b either. Earlier I always could see it k3b right after I plugged it in. But not now.
 
Old 11-24-2005, 06:42 PM   #10
microsoft/linux
Senior Member
 
Registered: May 2004
Location: Sebec, ME, USA
Distribution: Debian Etch, Windows XP Home, FreeBSD
Posts: 1,445
Blog Entries: 9

Rep: Reputation: 45
has anything changed on your system(update of software, something?) since the last time you tried it?
 
Old 11-28-2005, 03:34 PM   #11
bamsesbilledbog
LQ Newbie
 
Registered: Apr 2005
Posts: 20

Original Poster
Rep: Reputation: 0
Thanks for the help. But I figured out the problem. It was a hardwarefailure. The 5 1/4" case no longer works.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mount External CD-R/DVD on Laptop USB or PCMCIA?? ArchiMark Debian 2 05-21-2005 01:26 PM
unable to mount CD or DVD JimBass Linux - Newbie 10 04-16-2005 11:43 PM
help - unable to mount DVD on FC3 linswf Fedora 3 02-20-2005 03:56 PM
Unable to mount External USB 120gb HD Dman83 Linux - Hardware 6 03-07-2004 07:48 PM
Unable to Mount External USB 120GB HD Dman83 Linux - Newbie 12 02-15-2004 04:10 PM


All times are GMT -5. The time now is 06:58 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration