LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 04-05-2010, 12:09 PM   #1
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Rep: Reputation: 0
Ubuntu 10.04 Network Adapters not recognized


I recently installed Kubuntu 10.04 on my netbook, and have been unable to connect to the internet through wireless or wired. I mainly use this computer away from wired lines so the wired part isn't extremely important, but not being able to use wireless has turned my netbook into a $500 paper weight.

I'm pretty sure the reason the devices aren't recognized is because of mismatched drivers.

I downloaded b43-fwcutter-012 and the correct (I think) broadcom driver; however, I can't get the cutter to install. I get this message:


Code:
aaron@aaron-netbook:~/Desktop/b43-fwcutter-012$ make
cc -Os -fomit-frame-pointer -std=c99 -Wall -pedantic -D_BSD_SOURCE -DFWCUTTER_VERSION_=012   -c -o fwcutter.o fwcutter.c
make: cc: Command not found
make: *** [fwcutter.o] Error 127
 
Old 04-05-2010, 12:45 PM   #2
amani
Senior Member
 
Registered: Jul 2006
Location: Kolkata, India
Distribution: Debian 64-bit GNU/Linux, Kubuntu64, Fedora QA, Slackware,
Posts: 2,766

Rep: Reputation: Disabled
Kubuntu-10.04 is still under development. File bugs with bugs.launchpad.net
 
Old 04-05-2010, 12:50 PM   #3
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
I understand that; however, I also installed Ubuntu 9.10 and reinstalled 8.4 (the original OS), and have the same problem. So it's not a problem isolated to 10.04.
 
Old 04-05-2010, 02:44 PM   #4
ordinary
Member
 
Registered: Apr 2007
Location: the Rocket City
Distribution: Debian, Ubuntu, CentOS; in days past Fedora, Solaris, SunOS, 4.2BSD, 4.3BSD, SVR4, AIX, HP-UX
Posts: 101

Rep: Reputation: Disabled
The error message says cc isn't installed. I'd install cc, I guess. It's the c compiler, and make wants it.
 
Old 04-05-2010, 02:55 PM   #5
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
I really have no idea about this Linux stuff. I've only used this to take notes in class.

I've looked up this problem in another thread here, and someone suggested using this:

Code:
su -
yum -y install gcc gcc++
However, when it asks for my password, it says:

Code:
su: Authentication failure
So unless there's some other super secret password that I didn't enter into the system, I'm at a complete loss.
 
Old 04-05-2010, 03:53 PM   #6
Samotnik
Member
 
Registered: Jun 2006
Location: Belarus
Distribution: Debian GNU/Linux testing/unstable
Posts: 471

Rep: Reputation: 40
yum is a package manager from SuSE. In ubuntu you can install packages with apt-get command.
Try to use sudo apt-get install gcc g++.
 
Old 04-05-2010, 03:58 PM   #7
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
I really appreciate the help.

I got further with that command; however, it seems that I'm missing yet more files.

Code:
 Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gcc
 
Old 04-05-2010, 05:27 PM   #8
Samotnik
Member
 
Registered: Jun 2006
Location: Belarus
Distribution: Debian GNU/Linux testing/unstable
Posts: 471

Rep: Reputation: 40
I think you haven't got repos enabled. Open file /etc/apt/sources.list and uncomment or add repos:
Code:
deb http://us.archive.ubuntu.com/ubuntu/ lucid main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid main restricted
deb http://archive.canonical.com/ubuntu lucid partner
deb-src http://archive.canonical.com/ubuntu lucid partner
deb http://us.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
deb http://security.ubuntu.com/ubuntu lucid-security main restricted
deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted
Then make sudo apt-get update and then you can install software.
 
Old 04-05-2010, 07:52 PM   #9
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
I have zero access to the internet on that machine. That's what is making this process exceptionally painful.

All of those links are in the source.list file, though.

Last edited by punkarea51; 04-05-2010 at 08:34 PM.
 
Old 04-06-2010, 06:19 AM   #10
nonamenobody
Member
 
Registered: Oct 2002
Posts: 138

Rep: Reputation: 22
Quote:
Originally Posted by punkarea51 View Post
I recently installed Kubuntu 10.04 on my netbook, and have been unable to connect to the internet through wireless or wired. I mainly use this computer away from wired lines so the wired part isn't extremely important, but not being able to use wireless has turned my netbook into a $500 paper weight.

I'm pretty sure the reason the devices aren't recognized is because of mismatched drivers.

I downloaded b43-fwcutter-012 and the correct (I think) broadcom driver; however, I can't get the cutter to install. I get this message:


Code:
aaron@aaron-netbook:~/Desktop/b43-fwcutter-012$ make
cc -Os -fomit-frame-pointer -std=c99 -Wall -pedantic -D_BSD_SOURCE -DFWCUTTER_VERSION_=012   -c -o fwcutter.o fwcutter.c
make: cc: Command not found
make: *** [fwcutter.o] Error 127
"cc: Command not found" means that make cannot find 'cc', you probably don't have a C compiler installed. Try installing GCC or downloading a pre-compiled binary package.
 
Old 04-06-2010, 08:17 AM   #11
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
I downloaded and installed the GNU C Compiler 4.4.3; however, when I type in gcc -v, I get:

Code:
The program gcc can be found in the following packages:
 * gcc
 * pentium-builder
Try: sudo apt-get install <selected package>
Using that command yields

Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gcc
Doesn't sudo apt-get install search the online archives?



Also, make still does not work.

Last edited by punkarea51; 04-06-2010 at 08:26 AM.
 
Old 04-06-2010, 11:02 AM   #12
amani
Senior Member
 
Registered: Jul 2006
Location: Kolkata, India
Distribution: Debian 64-bit GNU/Linux, Kubuntu64, Fedora QA, Slackware,
Posts: 2,766

Rep: Reputation: Disabled
post output of

#lspci -vv


#sudo lshw --sanitize

Are you sure binaries are not available?
 
Old 04-06-2010, 02:15 PM   #13
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
lspci -vv:

Code:
aaron@aaron-netbook:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
        Subsystem: Dell Device 02b0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 1800 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f0540000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f0100000-f01fffff
        Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f0200000-f02fffff
        Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: 40400000-407fffff
        Prefetchable memory behind bridge: 00000000f0600000-00000000f06fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 1860 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at 1880 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20)
        Subsystem: Dell Device 02b0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01)
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1810 [size=16]
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 18a0 [size=32]
        Kernel modules: i2c-i801

02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at 40000000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci-pci

02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (prog-if 01)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0100400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel modules: sdhci-pci

02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0100800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: jmb38x_ms
        Kernel modules: jmb38x_ms

03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
        Subsystem: Broadcom Corporation Device 04b5
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: b43-pci-bridge
        Kernel modules: ssb

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
        Subsystem: Dell Device 02b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 27
        Region 0: I/O ports at 2000 [size=256]
        Region 2: Memory at f0610000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at f0600000 (64-bit, prefetchable) [size=64K]
        [virtual] Expansion ROM at f0620000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169


sudo lshw --sanitize:

Code:
Hardware Lister (lshw) - B.02.14
usage: lshw [-format] [-options ...]
       lshw -version

        -version        print program version (B.02.14)

format can be
        -html           output hardware tree as HTML
        -xml            output hardware tree as XML
        -short          output hardware paths
        -businfo        output bus information

options can be
        -class CLASS    only show a certain class of hardware
        -C CLASS        same as '-class CLASS'
        -c CLASS        same as '-class CLASS'
        -disable TEST   disable a test (like pci, isapnp, cpuid, etc. )
        -enable TEST    enable a test (like pci, isapnp, cpuid, etc. )
        -quiet          don't display status
        -sanitize       sanitize output (remove sensitive information like serial numbers, etc.)
        -numeric        output numeric IDs (for PCI, USB, etc.)
As far as binaries being available, I'm not really sure what that means, unfortunately.
 
Old 04-08-2010, 11:20 AM   #14
amani
Senior Member
 
Registered: Jul 2006
Location: Kolkata, India
Distribution: Debian 64-bit GNU/Linux, Kubuntu64, Fedora QA, Slackware,
Posts: 2,766

Rep: Reputation: Disabled
See http://ubuntuforums.org/showthread.php?t=684359
 
Old 04-08-2010, 05:34 PM   #15
punkarea51
LQ Newbie
 
Registered: Apr 2010
Posts: 9

Original Poster
Rep: Reputation: 0
Still says cc is not installed.

Is there any particular reason compilers aren't included?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
network adapters fakie_flip Linux - Hardware 1 09-01-2005 09:51 AM
Bridge 2 network adapters fabre Mandriva 1 09-28-2004 01:39 PM
for network adapters arben Red Hat 1 02-17-2004 02:33 AM
2 network adapters and problems Ez1 Mandriva 7 11-23-2003 01:43 PM
Multiple Network Adapters... markstevens Linux - Networking 1 06-16-2003 04:56 PM


All times are GMT -5. The time now is 10:33 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration