I tried to change the special function keys on my MS Natural Multimedia Keyboard V.1.0A
I used the app keytouch-editor. I did the installation over the Software Center.
I tried to put a function to one of the Multimedia keys.
However this shows now success. After that all special function keys doesn't work.
I restarted the PC. After the restart Ubuntu shows the message The system is running in low-graphics mode the keyboard and the mouse doesn't reacted on the window.
So I switched to the console and unistalled keytouch-editor.
Now I can use the mouse on the screen The system is running in low-graphics mode*
But the available options have no impact?
I use Ubuntu 14.04 and I am new to Ubuntu (Linux).
Start-Date: 2016-01-12 12:07:54
Commandline: aptdaemon role='role-commit-packages' sender=':1.101'
Install: menu:amd64 (2.1.46ubuntu1, automatic), keytouch-editor:amd64 (3.2.0~beta-3)
End-Date: 2016-01-12 12:07:55
Start-Date: 2016-01-12 13:07:12
Commandline: apt-get purge keytouch-editor
Purge: keytouch-editor:amd64 (3.2.0~beta-3)
End-Date: 2016-01-12 13:07:13
Maybe the issue was not provoked by keytouch-editor.
I read so far a bunch of aritcles. I think Ubuntu did also an update before I restarted.
[ 3.191]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 3.191] X Protocol Version 11, Revision 0
[ 3.191] Build Operating System: Linux 3.2.0-77-generic x86_64 Ubuntu
[ 3.191] Current Operating System: Linux nix 3.19.0-43-generic #49~14.04.1-Ubuntu SMP Thu Dec 31 15:44:49 UTC 2015 x86_64
[ 3.191] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-43-generic.efi.signed root=UUID=XXXXXXXXXXXXXXXXXXXXXXX ro quiet splash vt.handoff=7
[ 3.191] Build Date: 13 May 2015 04:35:05AM
[ 3.191] xorg-server 2:1.17.1-0ubuntu3~trusty1 (For technical support please see
http://www.ubuntu.com/support)
[ 3.191] Current version of pixman: 0.30.2
[ 3.191] Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
[ 3.191] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.191] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 12 21:46:11 2016
[ 3.191] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.191] (==) No Layout section. Using the first Screen section.
[ 3.191] (==) No screen section available. Using defaults.
[ 3.191] (**) |-->Screen "Default Screen Section" (0)
[ 3.191] (**) | |-->Monitor "<default monitor>"
[ 3.191] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.191] (==) Automatically adding devices
[ 3.191] (==) Automatically enabling devices
[ 3.191] (==) Automatically adding GPU devices
[ 3.191] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.191] Entry deleted from font path.
[ 3.191] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 3.191] Entry deleted from font path.
[ 3.191] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 3.191] Entry deleted from font path.
[ 3.191] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 3.191] Entry deleted from font path.
[ 3.191] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 3.191] Entry deleted from font path.
[ 3.191] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 3.191] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 3.191] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.191] (II) Loader magic: 0x55848cf73c60
[ 3.191] (II) Module ABI versions:
[ 3.191] X.Org ANSI C Emulation: 0.4
[ 3.191] X.Org Video Driver: 19.0
[ 3.191] X.Org XInput driver : 21.0
[ 3.191] X.Org Server Extension : 9.0
[ 3.191] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.192] (--) PCI:*(0:0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 3.192] (II) LoadModule: "glx"
[ 3.192] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.200] (II) Module glx: vendor="X.Org Foundation"
[ 3.200] compiled for 1.17.1, module version = 1.0.0
[ 3.200] ABI class: X.Org Server Extension, version 9.0
[ 3.200] (==) AIGLX enabled
[ 3.200] (==) Matched intel as autoconfigured driver 0
[ 3.200] (==) Matched intel as autoconfigured driver 1
[ 3.200] (==) Matched modesetting as autoconfigured driver 2
[ 3.200] (==) Matched fbdev as autoconfigured driver 3
[ 3.200] (==) Matched vesa as autoconfigured driver 4
[ 3.200] (==) Assigned the driver to the xf86ConfigLayout
[ 3.200] (II) LoadModule: "intel"
[ 3.200] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.201] (II) Module intel: vendor="X.Org Foundation"
[ 3.201] compiled for 1.17.1, module version = 2.99.917
[ 3.201] Module class: X.Org Video Driver
[ 3.201] ABI class: X.Org Video Driver, version 19.0
[ 3.201] (II) LoadModule: "modesetting"
[ 3.201] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.201] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.201] compiled for 1.17.1, module version = 1.17.1
[ 3.201] Module class: X.Org Video Driver
[ 3.201] ABI class: X.Org Video Driver, version 19.0
[ 3.201] (II) LoadModule: "fbdev"
[ 3.201] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.201] (II) Module fbdev: vendor="X.Org Foundation"
[ 3.201] compiled for 1.17.1, module version = 0.4.4
[ 3.201] Module class: X.Org Video Driver
[ 3.201] ABI class: X.Org Video Driver, version 19.0
[ 3.201] (II) LoadModule: "vesa"
[ 3.201] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.201] (II) Module vesa: vendor="X.Org Foundation"
[ 3.201] compiled for 1.17.1, module version = 2.3.3
[ 3.201] Module class: X.Org Video Driver
[ 3.201] ABI class: X.Org Video Driver, version 19.0
[ 3.201] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.201] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 3.201] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 3.201] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 3.201] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3.201] (II) FBDEV: driver for framebuffer: fbdev
[ 3.201] (II) VESA: driver for VESA chipsets: vesa
[ 3.201] (++) using VT number 7
[ 3.201] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20141121
[ 3.201] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-vivid 2:2.99.917-1~exp1ubuntu2.2~trusty1 (Timo Aaltonen <tjaalton@debian.org>)
[ 3.201] (II) intel(0): SNA compiled for use with valgrind
[ 3.202] (WW) Falling back to old probe method for modesetting
[ 3.202] (WW) Falling back to old probe method for fbdev
[ 3.202] (II) Loading sub module "fbdevhw"
[ 3.202] (II) LoadModule: "fbdevhw"
[ 3.202] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.202] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3.202] compiled for 1.17.1, module version = 0.0.2
[ 3.202] ABI class: X.Org Video Driver, version 19.0
[ 3.202] (WW) Falling back to old probe method for vesa
[ 3.202] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 3.202] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 3.202] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.202] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.202] (==) intel(0): RGB weight 888
[ 3.202] (==) intel(0): Default visual is TrueColor
[ 3.202] (II) intel(0): Output VGA1 has no monitor section
[ 3.202] (II) intel(0): Enabled output VGA1
[ 3.202] (II) intel(0): Output DP1 has no monitor section
[ 3.202] (II) intel(0): Enabled output DP1
[ 3.202] (II) intel(0): Output HDMI1 has no monitor section
[ 3.202] (II) intel(0): Enabled output HDMI1
[ 3.202] (II) intel(0): Output HDMI2 has no monitor section
[ 3.202] (II) intel(0): Enabled output HDMI2
[ 3.202] (II) intel(0): Output HDMI3 has no monitor section
[ 3.202] (II) intel(0): Enabled output HDMI3
[ 3.202] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3.216] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.216] (II) intel(0): Enabled output VIRTUAL1
[ 3.216] (--) intel(0): Output HDMI2 using initial mode 1680x1050 on pipe 1
[ 3.216] (--) intel(0): Output HDMI3 using initial mode 1920x1080 on pipe 0
[ 3.216] (==) intel(0): TearFree disabled
[ 3.216] (==) intel(0): DPI set to (96, 96)
[ 3.216] (II) Loading sub module "dri2"
[ 3.216] (II) LoadModule: "dri2"
[ 3.216] (II) Module "dri2" already built-in
[ 3.216] (II) Loading sub module "present"
[ 3.216] (II) LoadModule: "present"
[ 3.216] (II) Module "present" already built-in
[ 3.216] (II) UnloadModule: "modesetting"
[ 3.216] (II) Unloading modesetting
[ 3.216] (II) UnloadModule: "fbdev"
[ 3.216] (II) Unloading fbdev
[ 3.216] (II) UnloadSubModule: "fbdevhw"
[ 3.216] (II) Unloading fbdevhw
[ 3.216] (II) UnloadModule: "vesa"
[ 3.216] (II) Unloading vesa
[ 3.216] (==) Depth 24 pixmap format is 32 bpp
[ 3.216] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 3.216] (==) intel(0): Backing store enabled
[ 3.216] (==) intel(0): Silken mouse enabled
[ 3.216] (II) intel(0): HW Cursor enabled
[ 3.216] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.216] (==) intel(0): DPMS enabled
[ 3.216] (==) intel(0): display hotplug detection enabled
[ 3.216] (II) intel(0): [DRI2] Setup complete
[ 3.216] (II) intel(0): [DRI2] DRI driver: i965
[ 3.216] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.216] (II) intel(0): direct rendering: DRI2 enabled
[ 3.216] (II) intel(0): hardware support for Present enabled
[ 3.216] (--) RandR disabled
[ 3.235] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.235] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.235] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.235] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.235] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.235] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.235] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.235] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.235] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.235] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 3.235] (II) AIGLX: Loaded and initialized i965
[ 3.235] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.237] (II) intel(0): switch to mode 1920x1080@50.0 on HDMI3 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.252] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 3.263] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.267] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 3.268] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.268] (II) LoadModule: "evdev"
[ 3.268] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.269] (II) Module evdev: vendor="X.Org Foundation"
[ 3.269] compiled for 1.17.1, module version = 2.9.0
[ 3.269] Module class: X.Org XInput Driver
[ 3.269] ABI class: X.Org XInput driver, version 21.0
[ 3.269] (II) Using input driver 'evdev' for 'Power Button'
[ 3.269] (**) Power Button: always reports core events
[ 3.269] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3.269] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.269] (--) evdev: Power Button: Found keys
[ 3.269] (II) evdev: Power Button: Configuring as keyboard
[ 3.269] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 3.269] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.269] (**) Option "xkb_rules" "evdev"
[ 3.269] (**) Option "xkb_model" "pc105"
[ 3.269] (**) Option "xkb_layout" "de"
[ 3.271] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 3.271] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.271] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.271] (II) Using input driver 'evdev' for 'Power Button'
[ 3.271] (**) Power Button: always reports core events
[ 3.271] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3.271] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.271] (--) evdev: Power Button: Found keys
[ 3.271] (II) evdev: Power Button: Configuring as keyboard
[ 3.271] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 3.271] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3.271] (**) Option "xkb_rules" "evdev"
[ 3.271] (**) Option "xkb_model" "pc105"
[ 3.271] (**) Option "xkb_layout" "de"
[ 3.272] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 3.272] (II) No input driver specified, ignoring this device.
[ 3.272] (II) This device may have been added with another device file.
[ 3.272] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[ 3.272] (II) No input driver specified, ignoring this device.
[ 3.272] (II) This device may have been added with another device file.
[ 3.272] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver v2.0 (/dev/input/event5)
[ 3.272] (**) Microsoft Microsoft Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 3.272] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver v2.0'
[ 3.272] (**) Microsoft Microsoft Nano Transceiver v2.0: always reports core events
[ 3.272] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: Device: "/dev/input/event5"
[ 3.272] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Vendor 0x45e Product 0x800
[ 3.272] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found keys
[ 3.272] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Configuring as keyboard
[ 3.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:045E:0800.0002/input/input5/event5"
[ 3.272] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver v2.0" (type: KEYBOARD, id 8)
[ 3.272] (**) Option "xkb_rules" "evdev"
[ 3.272] (**) Option "xkb_model" "pc105"
[ 3.272] (**) Option "xkb_layout" "de"
[ 3.272] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver v2.0 (/dev/input/event6)
[ 3.272] (**) Microsoft Microsoft Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 3.272] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver v2.0'
[ 3.272] (**) Microsoft Microsoft Nano Transceiver v2.0: always reports core events
[ 3.272] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: Device: "/dev/input/event6"
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Vendor 0x45e Product 0x800
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found 9 mouse buttons
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found scroll wheel(s)
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found relative axes
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found x and y relative axes
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Configuring as mouse
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Adding scrollwheel support
[ 3.328] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 3.328] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:045E:0800.0003/input/input6/event6"
[ 3.328] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver v2.0" (type: MOUSE, id 9)
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: initialized for relative axes.
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration profile 0
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 3.328] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver v2.0 (/dev/input/mouse1)
[ 3.328] (II) No input driver specified, ignoring this device.
[ 3.328] (II) This device may have been added with another device file.
[ 3.328] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver v2.0 (/dev/input/event7)
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 3.328] (II) Using input driver 'evdev' for 'Microsoft Microsoft Nano Transceiver v2.0'
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: always reports core events
[ 3.328] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: Device: "/dev/input/event7"
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Vendor 0x45e Product 0x800
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found 1 mouse buttons
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found scroll wheel(s)
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found relative axes
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found absolute axes
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found absolute multitouch axes
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found x and y absolute axes
[ 3.328] (--) evdev: Microsoft Microsoft Nano Transceiver v2.0: Found keys
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Forcing relative x/y axes to exist.
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Configuring as mouse
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Configuring as keyboard
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Adding scrollwheel support
[ 3.328] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 3.328] (**) evdev: Microsoft Microsoft Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:045E:0800.0004/input/input7/event7"
[ 3.328] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[ 3.328] (**) Option "xkb_rules" "evdev"
[ 3.328] (**) Option "xkb_model" "pc105"
[ 3.328] (**) Option "xkb_layout" "de"
[ 3.328] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: initialized for relative axes.
[ 3.328] (WW) evdev: Microsoft Microsoft Nano Transceiver v2.0: ignoring absolute axes.
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration profile 0
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 3.328] (**) Microsoft Microsoft Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 3.329] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver v2.0 (/dev/input/js0)
[ 3.329] (II) No input driver specified, ignoring this device.
[ 3.329] (II) This device may have been added with another device file.
[ 3.329] (II) config/udev: Adding input device Microsoft Corporation Microsoft Laser Mouse 6000 (/dev/input/event4)
[ 3.329] (**) Microsoft Corporation Microsoft Laser Mouse 6000: Applying InputClass "evdev pointer catchall"
[ 3.329] (II) Using input driver 'evdev' for 'Microsoft Corporation Microsoft Laser Mouse 6000'
[ 3.329] (**) Microsoft Corporation Microsoft Laser Mouse 6000: always reports core events
[ 3.329] (**) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Device: "/dev/input/event4"
[ 3.388] (--) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Vendor 0x45e Product 0xf0
[ 3.388] (--) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Found 9 mouse buttons
[ 3.388] (--) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Found scroll wheel(s)
[ 3.388] (--) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Found relative axes
[ 3.388] (--) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Found x and y relative axes
[ 3.388] (II) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Configuring as mouse
[ 3.388] (II) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Adding scrollwheel support
[ 3.388] (**) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: YAxisMapping: buttons 4 and 5
[ 3.388] (**) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:045E:00F0.0001/input/input4/event4"
[ 3.388] (II) XINPUT: Adding extended input device "Microsoft Corporation Microsoft Laser Mouse 6000" (type: MOUSE, id 11)
[ 3.388] (II) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: initialized for relative axes.
[ 3.388] (**) Microsoft Corporation Microsoft Laser Mouse 6000: (accel) keeping acceleration scheme 1
[ 3.388] (**) Microsoft Corporation Microsoft Laser Mouse 6000: (accel) acceleration profile 0
[ 3.388] (**) Microsoft Corporation Microsoft Laser Mouse 6000: (accel) acceleration factor: 2.000
[ 3.388] (**) Microsoft Corporation Microsoft Laser Mouse 6000: (accel) acceleration threshold: 4
[ 3.388] (II) config/udev: Adding input device Microsoft Corporation Microsoft Laser Mouse 6000 (/dev/input/mouse0)
[ 3.388] (II) No input driver specified, ignoring this device.
[ 3.388] (II) This device may have been added with another device file.
[ 3.388] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 3.388] (II) No input driver specified, ignoring this device.
[ 3.388] (II) This device may have been added with another device file.
[ 3.388] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 3.388] (II) No input driver specified, ignoring this device.
[ 3.388] (II) This device may have been added with another device file.
[ 3.388] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 3.388] (II) No input driver specified, ignoring this device.
[ 3.388] (II) This device may have been added with another device file.
[ 3.388] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[ 3.388] (II) No input driver specified, ignoring this device.
[ 3.388] (II) This device may have been added with another device file.
[ 3.389] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[ 3.389] (II) No input driver specified, ignoring this device.
[ 3.389] (II) This device may have been added with another device file.
[ 3.389] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[ 3.389] (II) No input driver specified, ignoring this device.
[ 3.389] (II) This device may have been added with another device file.
[ 3.389] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 3.389] (II) No input driver specified, ignoring this device.
[ 3.389] (II) This device may have been added with another device file.
[ 3.389] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 3.389] (II) No input driver specified, ignoring this device.
[ 3.389] (II) This device may have been added with another device file.
[ 3.389] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event18)
[ 3.389] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3.389] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 3.389] (**) Eee PC WMI hotkeys: always reports core events
[ 3.389] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event18"
[ 3.389] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 3.389] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 3.389] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 3.389] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input18/event18"
[ 3.389] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 3.389] (**) Option "xkb_rules" "evdev"
[ 3.389] (**) Option "xkb_model" "pc105"
[ 3.389] (**) Option "xkb_layout" "de"
[ 3.389] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 3.389] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.389] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.389] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.389] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 3.389] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.389] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.389] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.389] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 3.389] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 3.389] (**) Option "xkb_rules" "evdev"
[ 3.389] (**) Option "xkb_model" "pc105"
[ 3.389] (**) Option "xkb_layout" "de"
[ 3.552] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Eee PC WMI hotkeys: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Microsoft Corporation Microsoft Laser Mouse 6000: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Microsoft Microsoft Nano Transceiver v2.0: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Power Button: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.552] (II) evdev: Power Button: Close
[ 3.552] (II) UnloadModule: "evdev"
[ 3.556] (II) Server terminated successfully (0). Closing log file.
The system is running in low-graphics mode AFTER keytouch-editor
