LinuxQuestions.org
Latest LQ Deal: Linux Power User Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 10-16-2006, 10:09 PM   #1
bytefang
LQ Newbie
 
Registered: Sep 2006
Posts: 3

Rep: Reputation: 0
Unhappy Suse 10.1 Audio Problem


Hi,

I'm new to linux and I managed to install SuSe 10.1.

As of now I have a problem with my audio device it plays only for several minutes or sometimes just in seconds before it crashes when I'm using Amarok, Xine and other multi-media players..

Please help... Thank you in advance...

Best regards,

bytefang
 
Old 10-17-2006, 12:28 AM   #2
jantman
Member
 
Registered: Nov 2005
Location: New Jersey, USA
Distribution: SuSE
Posts: 492

Rep: Reputation: 31
Please post the details of your system, audio hardware, audio driver/subsystem being used, and other pertinent information.
 
Old 10-18-2006, 09:13 PM   #3
bytefang
LQ Newbie
 
Registered: Sep 2006
Posts: 3

Original Poster
Rep: Reputation: 0
Sorry, I forgot to post it before.

My PC has the following specs.

PROCESSOR:
Sempron 2200+

CHIPSET:
North Bridge: VIA KM266Pro, South Bridge: VIA 8235

AUDIO:
Onboard 5.1 Channel, AC97 Audio Codec

RAM:
512 MB

Sorry Jant I don't know how to get info on this, driver/subsystem. Can you please teach me how.
 
Old 10-19-2006, 12:07 AM   #4
jantman
Member
 
Registered: Nov 2005
Location: New Jersey, USA
Distribution: SuSE
Posts: 492

Rep: Reputation: 31
to keep it simple, start by posting the entire output of dmesg
 
Old 10-19-2006, 01:27 AM   #5
JonBrant
Member
 
Registered: Jul 2004
Distribution: Suse 10.2
Posts: 43

Rep: Reputation: 15
Hiya. Have you set up the card already? Did you just let the installer do it? I noticed that when I let the installer do it, it didn't work. So, if that's the case, in Gnome, click "Desktop" on the bottom bar, click Yast, on the left click "Hardware", then click sound. Click edit, choose "normal set up", hit next, hit test and make sure you hear it... next, finish.

Hopefully it's as simple as that or I'm not much use good luck!
 
Old 10-19-2006, 09:04 PM   #6
bytefang
LQ Newbie
 
Registered: Sep 2006
Posts: 3

Original Poster
Rep: Reputation: 0
JonBrant, thank you for your reply but my my audio still crashes after a couple of minutes.

Jant, this is the the dmesg output

suse:/home/cmsamijon # dmesg
Linux version 2.6.16.13-4-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed May 3 04:53:23 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
BIOS-e820: 000000001bff0000 - 000000001bff8000 (ACPI data)
BIOS-e820: 000000001bff8000 - 000000001c000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
447MB LOWMEM available.
No mptable found.
On node 0 totalpages: 114672
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 110576 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 AMI ) @ 0x000fa500
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1bff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1bff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1bff00c0
ACPI: DSDT (v001 VIA K7VT4 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x31a resume=/dev/hda2 splash=silentbootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1499.715 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 449064k/458688k available (1491k kernel code, 9012k reserved, 607k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3002.95 BogoMIPS (lpj=6005917)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Sempron(tm) 2200+ stepping 01
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2347k freed
not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: d5d00000-ddcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1161323136.796:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd8000000, mapped to 0xdc880000, using 10240k, total 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=24
vesafb: protected mode interface info at c000:7801
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76045 bytes,<6>...found (1280x1024, 33692 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
input: PC Speaker as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 EHCI PS2M PS2K AC9 MC9 ILAN SLPB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 156k freed
Write protecting the kernel read-only data: 281k
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: ST320413A, ATA DISK drive
hdb: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3
Probing IDE interface ide1...
hdc: ST340014A, ATA DISK drive
hdd: ST340810A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1
hdd: max request size: 128KiB
hdd: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdd: cache flushes not supported
hdd: hdd1
Attempting manual resume
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
reiserfs: disabling flush barriers on hda3
ReiserFS: hda3: Using r5 hash to sort names
Adding 730916k swap on /dev/hda2. Priority:-1 extents:1 across:730916k
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
gameport: NS558 PnP Gameport is pnp00:04/gameport0, io 0x200, speed 1011kHz
Linux agpgart interface v0.101 (c) Dave Jones
NET: Registered protocol family 23
agpgart: Detected VIA KM400/KM400A chipset
agpgart: AGP aperture is 128M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
via_ircc: module not supported by Novell, setting U taint flag.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 169, io base 0x0000e400
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 169, io base 0x0000e800
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 9
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 169, io base 0x0000ec00
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 169, io mem 0xdfffff00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.13-4-default ehci_hcd
usb usb4: SerialNumber: 0000:00:10.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
eth0: VIA Rhine II at 0x1dc00, 00:0b:6a:a0:dd:92, IRQ 177.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
ReiserFS: hdd1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdd1: checking transaction log (hdd1)
reiserfs: disabling flush barriers on hdd1
ReiserFS: hdd1: Using r5 hash to sort names
ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
ReiserFS: hdc1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc1: checking transaction log (hdc1)
ReiserFS: hdc1: Using r5 hash to sort names
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1161323173.298:2): AppArmor (version 2.0-19.43r6320) initialized

ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
eth0: link down
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
audit(1161294378.200:3): audit_backlog_limit=256 old=64 by auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
powernow-k8: Processor cpuid 681 not supported
vmmon: module not supported by Novell, setting U taint flag.
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[3062]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3062]: Module vmmon: initialized
vmnet: module not supported by Novell, setting U taint flag.
/dev/vmnet: open called by PID 3119 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
[drm] Initialized drm 1.0.1 20051102
via: module not supported by Novell, setting U taint flag.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Via IRQ fixup for 0000:01:00.0, from 11 to 1
[drm] Initialized via 2.7.4 20051116 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
suse:/home/cmsamijon #
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
audio problem with suse linux 10.0 samir01m11 SUSE / openSUSE 3 09-02-2006 10:27 AM
audio problem with suse linux 10.0 samir01m11 Linux - Hardware 0 07-10-2006 04:13 AM
Inspiron 2650 Suse 9.1 audio problem spaceagedevice Linux - Laptop and Netbook 0 01-31-2005 08:42 PM
audio problem with Thinkpad T30 / SUSE 9 ruprecht Linux - Hardware 0 11-25-2003 06:34 PM
Problem with audio - on SuSE Linux 8.2 GloVe Linux - Hardware 2 09-26-2003 09:12 AM


All times are GMT -5. The time now is 05:06 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration