LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 11-04-2006, 05:08 PM   #1
the peppi
LQ Newbie
 
Registered: May 2006
Posts: 5

Rep: Reputation: 0
Unhappy suse 10.0 / 10.1 freeze help please


i have suse 10.0 installed and the screen freezes after a while
i can still get in with ssh and the machine seems to be working
so then i installed suse 10.1 and the same problem occured after a while the screen freezes solid
and with ssh i can get in from my other machine

i think it has something to do with drivers
but i am a noob when it comes to linux and i was hoping that maybe some one here could help me
maybe some commando's to figure out why and where the fault is
or some commandos to reset some things without rebooting it

like i said i still can reach the machine when the screen freezes

any help is very much apriciated



kind regards
peppi
 
Old 11-04-2006, 05:21 PM   #2
btmiller
Senior Member
 
Registered: May 2004
Location: In the DC 'burbs
Distribution: Arch, Scientific Linux, Debian, Ubuntu
Posts: 4,275

Rep: Reputation: 370Reputation: 370Reputation: 370Reputation: 370
When the screen freezes can you kill X with Ctrl+Alt+Backspace or is it totally frozen? When you SSH in look at top to see what is consuming the CPU and look at the output of the dmesg command to see if there are any driver errors in the kernel.
 
Old 11-04-2006, 05:34 PM   #3
the peppi
LQ Newbie
 
Registered: May 2006
Posts: 5

Original Poster
Rep: Reputation: 0
hi
thnx for the reply i think the keybord doesn't work either
so i can go check with this commando and see what is wrong but where do i have to look for ?

i copy this from the telnet session
so maybe one of you can see something for me


Quote:
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384040k/393152k available (1490k kernel code, 8468k reserved, 608k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2661.44 BogoMIPS (lpj=5322899)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1500+ stepping 02
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2315k freed
not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
PCI quirk: region 5000-500f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dc000000-ddffffff
PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162680095.716:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd0000000, mapped to 0xd8880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c710
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 169
0000:00:0c.0: ttyS2 at I/O 0xdc00 (irq = 169) is a 16550A
0000:00:0c.0: ttyS3 at I/O 0xdc08 (irq = 169) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
input: PC Speaker as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: VIA IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: ST310014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 20005650 sectors (10242 MB) w/2048KiB Cache, CHS=19846/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
Probing IDE interface ide1...
hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Attempting manual resume
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
Adding 779112k swap on /dev/hda1. Priority:-1 extents:1 across:779112k
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
Linux Tulip driver version 1.1.14-NAPI (May 31, 2006)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 177
tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at 0001e000, 00:0C:F6:0B:88:9E, IRQ 177.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000c400
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
hwmon: module not supported by Novell, setting U taint flag.
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 10, io base 0x0000c800
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd
usb usb2: SerialNumber: 0000:00:07.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
via686a: module not supported by Novell, setting U taint flag.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:07.5, from 5 to 11
PCI: Setting latency timer of device 0000:00:07.5 to 64
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1162680115.877:2): AppArmor (version 2.0-19.43r6320) initialized

ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
NET: Registered protocol family 17
audit(1162680133.230:3): audit_backlog_limit=256 old=64 by auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
powernow-k8: Processor cpuid 662 not supported
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
peppis:~ #
 
Old 11-04-2006, 05:39 PM   #4
Freestone
Member
 
Registered: Jan 2003
Location: Brighton, Michigan
Distribution: FC5
Posts: 114

Rep: Reputation: 15
Did you install ATI or nvidia drivers? If so did you install the src rpms? If so, make sure you complete
the install of the rpms...Make sure you read the man or info page on rpm's and learn about installing src rpms.

Cheers.
 
Old 11-04-2006, 05:45 PM   #5
the peppi
LQ Newbie
 
Registered: May 2006
Posts: 5

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by Freestone
Did you install ATI or nvidia drivers? If so did you install the src rpms? If so, make sure you complete
the install of the rpms...Make sure you read the man or info page on rpm's and learn about installing src rpms.

Cheers.
hi m8
thnx for replying

actually i did not install anything
i just let suse do it all automaticly
and i updated suse aswell
so i thought this would do the trick
but what you are saying that i should find drivers and install them manually?

i think the rpm can be done with yast
maybe you have some links for me to find those drivers

thnx
peppi
 
Old 11-05-2006, 07:36 AM   #6
the peppi
LQ Newbie
 
Registered: May 2006
Posts: 5

Original Poster
Rep: Reputation: 0
nobody with the knowlidge to help me

or maybe some more commando's to find out where/what the problem is

thnx
peppi
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
SUSE 9.3 freeze every 5 mins ?? pleasehelpme Linux - Newbie 11 07-04-2005 04:12 PM
keyboard freeze in Suse 9.1 John Dory Linux - Distributions 26 01-22-2005 10:02 AM
SuSE 8.2 YaST freeze kjp_72 Linux - Distributions 16 04-27-2003 09:16 PM
SuSe 8.1 Windowmanager Freeze LesTalbot Linux - Distributions 0 01-31-2003 04:03 PM
suse 7.3 console freeze jimmythegoat Linux - General 8 03-04-2002 04:57 PM


All times are GMT -5. The time now is 01:06 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration