LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 05-24-2006, 12:20 AM   #1
Haloony
Member
 
Registered: Aug 2005
Posts: 61

Rep: Reputation: 15
Sound Problem


Hey guys I seem to be having a problem with sound on my computer, and Im pretty sure that it's both input and output. For a while my sound will be working fin, but then all of the sudden it will stop working, and I wont be able to hear anything but system noises like that notorious bleep. It may be related to Skype in some way because I'm pretty sure it started when I first downloaded and installed Skype.
Any Insight would be great,
Hal
 
Old 05-24-2006, 12:47 AM   #2
prozac
Member
 
Registered: Oct 2005
Location: Australia
Distribution: slackware 12.1
Posts: 753

Rep: Reputation: 32
it helps much if you give your system specifications like what hardware, what operating system etc..
 
Old 05-24-2006, 08:20 AM   #3
Haloony
Member
 
Registered: Aug 2005
Posts: 61

Original Poster
Rep: Reputation: 15
I have a compaq d330 slim tower, and I am running Ubuntu breezy badger. I have an intel pentium 4 procesor at 2.66 ghz. My soundcard is an intel ICH5. Sorry I was so ambiguous and if u need any more info just tell me. Thanks
 
Old 05-24-2006, 08:28 AM   #4
verdeboy2k
Member
 
Registered: Jan 2004
Location: /dev/random
Distribution: Gentoo amd64, CrunchBang amd64
Posts: 350

Rep: Reputation: 32
have you noticed that anything in particular causes the problem? Or better yet, post a copy of your dmesg output after the sound stops working.
 
Old 05-25-2006, 08:32 PM   #5
Haloony
Member
 
Registered: Aug 2005
Posts: 61

Original Poster
Rep: Reputation: 15
296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.186000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.186000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.193000] Memory: 503172k/516032k available (1416k kernel code, 12288k reserved, 762k data, 224k init, 0k highmem)
[4294668.193000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.194000] Calibrating delay loop... 5275.64 BogoMIPS (lpj=2637824)
[4294668.219000] Security Framework v1.0.0 initialized
[4294668.219000] SELinux: Disabled at boot.
[4294668.219000] Mount-cache hash table entries: 512
[4294668.219000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294668.219000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294668.219000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294668.219000] CPU: L2 cache: 512K
[4294668.219000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294668.219000] CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
[4294668.219000] Enabling fast FPU save and restore... done.
[4294668.219000] Enabling unmasked SIMD FPU exception support... done.
[4294668.219000] Checking 'hlt' instruction... OK.
[4294668.223000] Checking for popad bug... OK.
[4294668.223000] checking if image is initramfs... it is
[4294668.635000] Freeing initrd memory: 5165k freed
[4294668.635000] ACPI: Looking for DSDT in initrd... not found!
[4294668.680000] not found!
[4294668.685000] ENABLING IO-APIC IRQs
[4294668.685000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294668.796000] NET: Registered protocol family 16
[4294668.796000] EISA bus registered
[4294668.796000] ACPI: bus type pci registered
[4294668.796000] PCI: PCI BIOS revision 2.20 entry at 0xec1a9, last bus=5
[4294668.796000] PCI: Using configuration type 1
[4294668.796000] mtrr: v2.0 (20020519)
[4294668.796000] ACPI: Subsystem revision 20050729
[4294668.798000] ACPI: Interpreter enabled
[4294668.798000] ACPI: Using IOAPIC for interrupt routing
[4294668.799000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[4294668.799000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294668.799000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294668.799000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294668.800000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294668.800000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[4294668.800000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[4294668.800000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294668.800000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.800000] PCI: Probing PCI hardware (bus 00)
[4294668.801000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294668.801000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.802000] Boot video device is 0000:00:02.0
[4294668.802000] PCI: Enabled i801 SMBus device
[4294668.802000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294668.802000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.808000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.809000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[4294668.812000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.812000] pnp: PnP ACPI init
[4294668.814000] pnp: PnP ACPI: found 13 devices
[4294668.814000] PnPBIOS: Disabled by ACPI PNP
[4294668.814000] PCI: Using ACPI for IRQ routing
[4294668.814000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.860000] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[4294668.860000] pnp: 00:0b: ioport range 0x400-0x41f has been reserved
[4294668.860000] pnp: 00:0b: ioport range 0x420-0x43f has been reserved
[4294668.860000] pnp: 00:0b: ioport range 0x440-0x45f has been reserved
[4294668.860000] pnp: 00:0b: ioport range 0x460-0x47f could not be reserved
[4294668.860000] pnp: 00:0b: ioport range 0xf800-0xf81f could not be reserved
[4294668.860000] pnp: 00:0b: ioport range 0xf820-0xf83f could not be reserved
[4294668.860000] pnp: 00:0b: ioport range 0xf840-0xf85f has been reserved
[4294668.860000] pnp: 00:0b: ioport range 0xf860-0xf87f has been reserved
[4294668.861000] audit: initializing netlink socket (disabled)
[4294668.861000] audit: initialized
[4294668.861000] VFS: Disk quotas dquot_6.5.1
[4294668.861000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.861000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294668.861000] devfs: boot_options: 0x0
[4294668.861000] Initializing Cryptographic API
[4294668.861000] isapnp: Scanning for PnP cards...
[4294669.215000] isapnp: No Plug & Play device found
[4294669.231000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[4294669.233000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.233000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.233000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294669.233000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.235000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.235000] io scheduler noop registered
[4294669.235000] io scheduler anticipatory registered
[4294669.235000] io scheduler deadline registered
[4294669.235000] io scheduler cfq registered
[4294669.235000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.236000] EISA: Probing bus 0 at eisa.0
[4294669.236000] Cannot allocate resource for EISA slot 1
[4294669.236000] EISA: Detected 0 cards.
[4294669.236000] NET: Registered protocol family 2
[4294669.245000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294669.245000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294669.245000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294669.245000] TCP: Hash tables configured (established 16384 bind 16384)
[4294669.245000] NET: Registered protocol family 8
[4294669.245000] NET: Registered protocol family 20
[4294669.245000] ACPI wakeup devices:
[4294669.245000] PCI0 HUB COM1 USB1 USB2 USB3 USB4 EUSB PBTN
[4294669.245000] ACPI: (supports S0 S1 S3 S4 S5)
[4294669.245000] Freeing unused kernel memory: 224k freed
[4294669.259000] vga16fb: initializing
[4294669.259000] vga16fb: mapped to 0xc00a0000
[4294669.380000] Console: switching to colour frame buffer device 80x30
[4294669.380000] fb0: VGA16 VGA frame buffer device
[4294669.396000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294670.478000] Capability LSM initialized
[4294670.489000] NET: Registered protocol family 1
[4294670.502000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.502000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.502000] ACPI: bus type ide registered
[4294670.512000] SCSI subsystem initialized
[4294670.513000] libata version 1.11 loaded.
[4294670.514000] ata_piix version 1.03
[4294670.514000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[4294670.514000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294670.514000] ata1: SATA max UDMA/133 cmd 0x14F8 ctl 0x1812 bmdma 0x14D0 irq 18
[4294670.514000] ata2: SATA max UDMA/133 cmd 0x1800 ctl 0x1816 bmdma 0x14D8 irq 18
[4294670.514000] ata1: SATA port has no device.
[4294670.514000] scsi0 : ata_piix
[4294670.514000] ata2: SATA port has no device.
[4294670.514000] scsi1 : ata_piix
[4294670.518000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294670.518000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294670.518000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294670.518000] ICH5: chipset revision 2
[4294670.518000] ICH5: not 100% native mode: will probe irqs later
[4294670.518000] ide0: BM-DMA at 0x14c0-0x14c7, BIOS settings: hdaMA, hdbio
[4294670.518000] ide1: BM-DMA at 0x14c8-0x14cf, BIOS settings: hdcMA, hddio
[4294670.518000] Probing IDE interface ide0...
[4294670.782000] hda: WDC WD400BB-60DGA0, ATA DISK drive
[4294671.395000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.395000] Probing IDE interface ide1...
[4294672.067000] hdc: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
[4294672.679000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.679000] Probing IDE interface ide2...
[4294673.192000] Probing IDE interface ide3...
[4294673.704000] Probing IDE interface ide4...
[4294674.216000] Probing IDE interface ide5...
[4294674.731000] hda: max request size: 128KiB
[4294674.731000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[4294674.731000] hda: cache flushes not supported
[4294674.731000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294674.786000] hdc: ATAPI 48X CD-ROM drive, 128kB Cache
[4294674.786000] Uniform CD-ROM driver Revision: 3.20
[4294675.039000] Attempting manual resume
[4294675.039000] swsusp: Suspend partition has wrong signature?
[4294675.060000] usbcore: registered new driver usbfs
[4294675.060000] usbcore: registered new driver hub
[4294675.061000] USB Universal Host Controller Interface driver v2.2
[4294675.061000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294675.061000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294675.061000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
[4294675.123000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294675.123000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001440
[4294675.123000] hub 1-0:1.0: USB hub found
[4294675.123000] hub 1-0:1.0: 2 ports detected
[4294675.126000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[4294675.126000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.126000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
[4294675.188000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294675.188000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001460
[4294675.188000] hub 2-0:1.0: USB hub found
[4294675.188000] hub 2-0:1.0: 2 ports detected
[4294675.191000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294675.191000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.191000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
[4294675.253000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.253000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001480
[4294675.253000] hub 3-0:1.0: USB hub found
[4294675.253000] hub 3-0:1.0: 2 ports detected
[4294675.276000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[4294675.276000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.276000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
[4294675.276000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.276000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[4294675.276000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000
[4294675.280000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294675.280000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294675.280000] hub 4-0:1.0: USB hub found
[4294675.280000] hub 4-0:1.0: 8 ports detected
[4294675.301000] hub 4-0:1.0: over-current change on port 7
[4294675.347000] tg3.c:v3.31 (June 8, 2005)
[4294675.347000] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294675.399000] eth0: Tigon3 [partno(BCM95782A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0e:7f:64:ae:5a
[4294675.399000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
[4294675.399000] eth0: dma_rwctrl[763f0000]
[4294677.753000] ACPI: CPU0 (power states: C1[C1])
[4294677.753000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294677.907000] Attempting manual resume
[4294677.907000] swsusp: Suspend partition has wrong signature?
[4294677.919000] kjournald starting. Commit interval 5 seconds
[4294677.919000] EXT3-fs: mounted filesystem with ordered data mode.
[4294679.082000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294682.211000] Adding 1489280k swap on /dev/hda5. Priority:-1 extents:1
[4294682.440000] EXT3 FS on hda1, internal journal
[4294688.712000] parport: PnPBIOS parport detected.
[4294688.712000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294688.799000] lp0: using parport0 (interrupt-driven).
[4294688.824000] mice: PS/2 mouse device common for all mice
[4294689.090000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
[4294689.786000] ts: Compaq touchscreen protocol output
[4294692.274000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294692.993000] cdrom: open failed.
[4294695.506000] Linux agpgart interface v0.101 (c) Dave Jones
[4294695.514000] agpgart: Detected an Intel 865 Chipset.
[4294695.514000] agpgart: Detected 8060K stolen memory.
[4294695.543000] agpgart: AGP aperture is 128M @ 0xf0000000
[4294695.818000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294695.823000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294695.823000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294695.880000] hw_random: RNG not detected
[4294696.339000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[4294696.339000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294696.649000] intel8x0_measure_ac97_clock: measured 49963 usecs
[4294696.649000] intel8x0: clocking to 48000
[4294698.236000] Real Time Clock Driver v1.12
[4294698.323000] input: PC Speaker
[4294698.513000] Floppy drive(s): fd0 is 1.44M
[4294698.527000] FDC 0 is a post-1991 82077
[4294701.263000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[4294701.263000] tg3: eth0: Flow control is on for TX and on for RX.
[4294701.746000] NET: Registered protocol family 10
[4294701.746000] Disabled Privacy Extensions on device c02eb280(lo)
[4294701.746000] IPv6 over IPv4 tunneling driver
[4294702.953000] ACPI: Power Button (FF) [PWRF]
[4294702.953000] ACPI: Power Button (CM) [PBTN]
[4294703.054000] ibm_acpi: ec object not found
[4294708.675000] [drm] Initialized drm 1.0.0 20040925
[4294708.680000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294708.684000] [drm] Initialized i915 1.2.0 20040405 on minor 0: Intel Corporation 82865G Integrated Graphics Controller
[4294708.685000] mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
[4294711.284000] apm: BIOS not found.
[4294711.753000] eth0: no IPv6 routers present
[4294713.810000] Bluetooth: Core ver 2.7
[4294713.810000] NET: Registered protocol family 31
[4294713.810000] Bluetooth: HCI device and connection manager initialized
[4294713.810000] Bluetooth: HCI socket layer initialized
[4294713.829000] Bluetooth: L2CAP ver 2.7
[4294713.829000] Bluetooth: L2CAP socket layer initialized
[4294713.855000] Bluetooth: RFCOMM ver 1.5
[4294713.855000] Bluetooth: RFCOMM socket layer initialized
[4294713.855000] Bluetooth: RFCOMM TTY layer initialized
[4296131.979000] mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
[4479934.711000] mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
[4544350.011000] mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
 
Old 06-14-2006, 05:32 PM   #6
Haloony
Member
 
Registered: Aug 2005
Posts: 61

Original Poster
Rep: Reputation: 15
Why does my sound variably stop working

Hey guys I've posted this before, but I definitely wasn't giving enough info. First off my sound just seems to stop working just out of the blue, and When I log off or shutdown the sound all the sudden fixes itself and I hear the log off/shutdown sound. I think there is some sort of constant cause for it, but I have no idea. I am running Ubuntu 6.06 on a Compaq d330 slim tower, and 2.66 ghz intel processor. Here is what comes up if I try to run totem, for instance, when the sound isn't working:
Code:
ALSA lib pcm_dmix.c:819:(snd_pcm_dmix_open) unable to open slave

** (totem:21094): WARNING **: Failed to connect to the session bus: No reply within specified time
ALSA lib pcm_dmix.c:819:(snd_pcm_dmix_open) unable to open slave
Im not sure what all of that really means so any explanations or solutions would be great. Thanks.
 
Old 06-16-2006, 02:53 AM   #7
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 23,067
Blog Entries: 11

Rep: Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910
I merged the new thread with the original ...


Cheers,
Tink
 
Old 06-18-2006, 10:48 PM   #8
Haloony
Member
 
Registered: Aug 2005
Posts: 61

Original Poster
Rep: Reputation: 15
bump- C'mon I posted the error message someone must know something about this.
 
Old 06-18-2006, 11:59 PM   #9
prozac
Member
 
Registered: Oct 2005
Location: Australia
Distribution: slackware 12.1
Posts: 753

Rep: Reputation: 32
I personally donot know the solution but i found something that might help you:
http://www.ubuntuforums.org/showthread.php?p=1106301
http://www.ubuntu.org.tw/modules/new...id=952&forum=2
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Sound Problem: ESS (ES1869F-Chipset) No Sound computer_kid Slackware 9 08-02-2006 09:41 PM
Other problem with the sound in Mandrake - onboard sound card Swetko Linux - Hardware 24 06-19-2006 04:27 PM
problem with sound in linux AC'97 sound controller venkatrao Linux - General 0 12-16-2005 02:11 PM
5.1 sound problem (sound blaster live and suse) shadout Linux - Hardware 11 06-24-2005 01:46 AM
Sound problem after installing/uninstalling JACK sound server bastupungen Linux - Software 1 02-28-2004 01:50 PM


All times are GMT -5. The time now is 04:08 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration