sound not working under slackware install
Hi, I've just installed slackware 10. I haven't been able to get the sound to work, and I know practically NOTHING about linux. I don't know where to start. Here is some things I think may be useful:
root@slackware:~# lspci -v 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [40] AGP version 3.0 Capabilities: [60] #08 [2001] 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17 Flags: 66Mhz, fast devsel 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) Subsystem: Giga-byte Technology: Unknown device 0c11 Flags: bus master, 66Mhz, fast devsel, latency 0 Capabilities: [48] #08 [01e1] 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Giga-byte Technology: Unknown device 0c11 Flags: 66Mhz, fast devsel, IRQ 5 I/O ports at c000 [size=32] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology: Unknown device 5004 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10 Memory at d8002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology: Unknown device 5004 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11 Memory at d8003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology: Unknown device 5004 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9 Memory at d8004000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: Giga-byte Technology: Unknown device a002 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5 I/O ports at b000 [size=256] I/O ports at b400 [size=128] Memory at d8000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00009000-00009fff Memory behind bridge: d7000000-d7ffffff Prefetchable memory behind bridge: d4000000-d4ffffff 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology: Unknown device 5002 Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d5000000-d6ffffff Prefetchable memory behind bridge: b0000000-cfffffff 01:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: LeadTek Research Inc. WinFast TV 2000 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at d4000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: LeadTek Research Inc.: Unknown device 6606 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at d4001000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Giga-byte Technology: Unknown device e000 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at 9000 [size=256] Memory at d7000000 (32-bit, non-prefetchable) [size=256] 02:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA]) Subsystem: Unknown device 18bc:0190 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10 Memory at b0000000 (32-bit, prefetchable) [size=256M] I/O ports at a000 [size=256] Memory at d6000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Capabilities: [50] Power Management version 2 02:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) Subsystem: Unknown device 18bc:0191 Flags: bus master, 66Mhz, medium devsel, latency 32 Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at d6010000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 knoppix doesn't get the sound working either. The brooktree devices are my TV tuner card. Please let me know if you need me to run some commands or whatever to give more details about this problem. My sound card is onboard nforce2 ac'97. |
Which kernel are you using, did you download and
install the nForce drivers from the nVidia site? Cheers, Tink |
First off Welcome. It's nice to have another slacker around.
I will preface this with. I am still very new to linux. :newbie: Did you try alsaconf ? This is the site I use to get my slack boxes up and running. (thanks Shilo) http://shilo.is-a-geek.com/slack/ Good luck. Blair |
Hi, got caught up at work, hadn't been able to get on here. I now have two weeks off to get this thing going, amongst other things.
Kernel version is 2.4.26. I did manage to download drivers from nvidia's website and compile a driver module, which modprobe can't seem to find: > root@slackware:~/nvdriver/nforce/nvaudio# cp nvaudio.o nvaudio.original > root@slackware:~/nvdriver/nforce/nvaudio# gzip nvaudio.o > root@slackware:~/nvdriver/nforce/nvaudio# modprove ./nvaudio > -bash: modprove: command not found > root@slackware:~/nvdriver/nforce/nvaudio# modprobe ./nvaudio > modprobe: Can't locate module ./nvaudio > root@slackware:~/nvdriver/nforce/nvaudio# ls > Makefile _ _ _nvaudio.original _nvhw.c _nvioctl.h _nvrec.c _nvspdif.c > nvwavout.c _tp* > chaninfo.h _ _nvcrush.c _ _ _ _ nvhw.h _nvmain.c _ nvrec.h _nvspdif.h > nvwavout.h _trpr.o > nvaudio.o.gz _nvcrush.o _ _ _ _ nvhw.o _nvmain.o _ nvrec.o _nvspdif.o > nvwavout.o > root@slackware:~/nvdriver/nforce/nvaudio# modprobe ./nvaudio.o.gz > modprobe: Can't locate module ./nvaudio.o.gz > root@slackware:~/nvdriver/nforce/nvaudio# Insmod however produces different results: > root@slackware:~/nvdriver/nforce/nvaudio# insmod nvaudio.o > nvaudio.o: unresolved symbol ac97_probe_codec > nvaudio.o: unresolved symbol ac97_set_dac_rate > nvaudio.o: unresolved symbol ac97_set_adc_rate And alsamixer brings up some options for my brooktree TV tuner card: Card: Brooktree Bt878 ? ? Chip: Bt87x ? ? Item: FM Any ideas? |
don't worry about this - I solved it. Did a reinstallation of linux, after doing some extensive reading - and sound is now fine. cheers dudes.
|
All times are GMT -5. The time now is 04:52 AM. |