Hello. I am

I have just installed Slackware 10.1

When it boots up in TEXT-MODE my keybord works fine. But when i Start KDE my keybord and mouse stop working...(When installig i chose not to enable HOTPOLUG, because when I enabled it my keybord didn't work in TEXT-MODE). I tried to use XORGSETUP and XORGCONFIG(I don't know what to choose when I am configuring manually).

P.S. Keybord PS/2, mouse USB optical and using sata.i kernel

Have you configured /etc/X11/xorg.conf, or run xorgconfig? If so, show it

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
#DisplaySize 280 220 # mm
Identifier "Monitor0"
VendorName "SNY"
ModelName "CPD-E100E"
HorizSync 30.0 - 70.0
HorizSync 0.0 - 0.0
VertRefresh 48.0 - 120.0
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "NoMergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 AP [Radeon 9600]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Maybe try a different mouse protocol, eg. IMPS/2 or PS/2...

Option "Protocol" "IMPS/2"

Just a thought.

But my keybord doesn't work too...

I do not know if this helps, but this is my working xorg.conf (relevent parts only). I too have a PS/2 keyboard and a USB mouse. The lack of hotplug on your system might interfere with the usb connection to the mouse, but I think if it is plugged in at boot-up it should still work.

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
#Option "Protocol" "ExplorerPS/2"
#Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"

EndSection


Good luck.

C

It doesn't help

I noticed that in text mode keybord's LEDS are working fine but when I start KDE they stop working

Keybord PS/2