Hi,

i am not able to configure one NIC in a PCI-E Slot because the System (sles10_sp2_64bit) doesn't see see card with lspci or hwinfo. When we use scanpci, we do see the card.
When we boot the System with a Knoppix- or OpenSuse11-LiveCD,then all is fine. The lspci stops at pci bus 0x0040, the scanpci not - Any Ideas?

Regards,
Holger



# scanpci | tail -26
pci bus 0x0018 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x164c
Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet

pci bus 0x0038 cardnum 0x0d function 0x00: vendor 0x1166 device 0x0104
Broadcom HT1000 PCI/PCI-X bridge

pci bus 0x0040 cardnum 0x0f function 0x00: vendor 0x1166 device 0x0140
Broadcom Device unknown

pci bus 0x0040 cardnum 0x10 function 0x00: vendor 0x1166 device 0x0142
Broadcom Device unknown

pci bus 0x0040 cardnum 0x11 function 0x00: vendor 0x1166 device 0x0144
Broadcom Device unknown

pci bus 0x0040 cardnum 0x12 function 0x00: vendor 0x1166 device 0x0142
Broadcom Device unknown

pci bus 0x0040 cardnum 0x13 function 0x00: vendor 0x1166 device 0x0144
Broadcom Device unknown

pci bus 0x0051 cardnum 0x00 function 0x00: vendor 0x8086 device 0x105e
Intel Corporation 82571EB Gigabit Ethernet Controller

pci bus 0x0051 cardnum 0x00 function 0x01: vendor 0x8086 device 0x105e
Intel Corporation 82571EB Gigabit Ethernet Controller


# lspci | tail
00:19.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
01:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02)
0c:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
0d:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
17:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
18:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
38:0d.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev c0)