LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Closed Thread
  Search this Thread
Old 09-27-2006, 11:18 AM   #1
deukalion
LQ Newbie
 
Registered: Sep 2006
Posts: 7

Rep: Reputation: 0
Problems with TwinView and TV-Out


Hello. I'm not so new to Linux but I don't know much about changing these kinds of things.

What I want to know is how exactly to activate TwinView or something, to clone my screen to the TV and to be able to play DVD's and Movies in fullscreen overlay on my TV. I mean to have both screens visible at the same time, not just one display.

I have a GeForceFX 5700LE and using Slackware 10.2 (Installed the full package deal with CD1 & 2)

I've tried nvtv and it doesn't seem to work whatever I do.

The only thing I have installed except for the full installation, which was a success without errors, is new nVidia-drivers.

But as a newbie, or something alike, I don't really apprehend the guide explained in the NVIDIA-README.

My computer is:
Slackware 10.2
Kernel 2.4.31
AMD Athlon XP 2600+
Asus card (don't know which model) with nForce2 chipset
GeForce FX 5700LE 128mb DDR
1,3gb DDR 400mhz
15" SuperView Monitor (Can run 1600x1024 on 60hz in Windows)
28" TV (Don't know its name) (Had it running on 1024x768 in Windows)

My installed drivers are:
NVIDIA-Linux-x86-1.0-8774-pkg1.run

What I've already tried is to add:
Option "TwinView"
and also
Option "TwinView" "True"
Option "TwinViewOrientation" "Clone" (Does work correctly in windows)

and I don't know what the "Option" for output type (SVIDEO, COMPOSITE) was but I tried that one and it didn't do any good. Need to have the composite option somehow to get colour on my TV, it was the only way to get it to work in Windows anyhow.

If someone can give me a tip on how to do this.
If there's a kernel error anything that prevents me from getting anything on my TV or my screen for that matter. Or if Xorg is outdated, or if the drivers from nVidia is bad or anything.

Whatever I seem to do when I try to add TwinView under "Device" I get disorted dots with disorted colours that changes when I press Enter a few times and then after a few times the computer makes the sound "Ding" and I have to restart my computer.

And this is my xonf.conf file:

Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006

# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of 
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen         "Screen 1" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 
# The module search path.  The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
    FontPath        "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath        "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath        "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath        "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath        "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath        "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath        "/usr/X11R6/lib/X11/fonts/local/"
    FontPath        "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
#    Load       "dri"
    Load           "dbe"  	# Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
#    Load        "speedo"
    Load           "freetype"
#    Load        "xtt"
    Load           "glx"
# This loads the DRI module
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
#    Option	"Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "azonaRF2300"
    Option         "XkbLayout" "se"
EndSection

Section "InputDevice"

# Identifier and driver
#    Option "Resolution"	"256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"	"Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "PS/2"
    Option         "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
    Option         "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 31.5
    HorizSync       35.2 - 35.2
    HorizSync       35.5 - 35.5
    VertRefresh     50.0 - 70.0
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset	"generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam	256
#    Clocks	25.2 28.3
    Identifier     "Standard VGA"
    Driver         "vga"
    VendorName     "Unknown"
    BoardName      "Unknown"
EndSection

Section "Device"

    #VideoRam    131072
    # Insert Clocks lines here if appropriate
    Identifier     "** NVIDIA (generic)                   [nv]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Screen 1"
    Device         "** NVIDIA (generic)                   [nv]"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
        Modes      "1024x768"
    EndSubSection
EndSection
Can someone give me a hint about this problem?
 
Old 09-27-2006, 01:34 PM   #2
GrueMaster
Member
 
Registered: Aug 2005
Location: Oregon
Distribution: Kubuntu.
Posts: 848

Rep: Reputation: 30
I'm not familiar with Slackware, but why are you loading the VGA driver? I'd start there.
 
Old 09-27-2006, 02:24 PM   #3
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 64
Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread is being closed because it is a duplicate.
 
  


Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Twinview Problems tntcoder Slackware 4 05-15-2006 06:34 AM
Twinview install problems lagu2653 Linux - Hardware 1 12-18-2005 11:36 PM
nvidia twinview problems dr.giz Linux - Software 1 11-12-2005 09:13 AM
TV-OUT with Twinview problems :S JLTB Linux - Hardware 5 05-29-2005 02:52 PM
NVIDIA Twinview Problems teal Linux - Newbie 2 06-28-2003 07:54 PM


All times are GMT -5. The time now is 09:45 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration